Re: VIA ACPI power management controller

On Thu, 05 Jun 2003 14:57:19 -0500
Jeremy Messenger <mezz7_at_cox.net> wrote:

> > Do'h! You are right that I didn't check in /usr/src/sys/conf/.. It does 
> > exist and I am doing the rebuild kernel right now.. Thanks..
> 
> Here's the result:
> ================================
> # dmesg | grep via
> viapropm0: SMBus I/O base at 0x5000
> viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at 
> device 7.4 on pci0
> viapropm0: failed to enable port mapping!
> viapropm0: could not allocate bus space
> device_probe_and_attach: viapropm0 attach returned 6
> ================================

> I don't know what the errors mean..

(4) netchild_at_ttyp0 % dmesg |grep via  
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc04ffc20.
viapropm0: SMBus I/O base at 0x5000
viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at device 7.4 on pci0
viapropm0: failed to enable port mapping!
viapropm0: could not allocate bus space
device_probe_and_attach: viapropm0 attach returned 6

This problem is under investigation. We already know why this error gets
printed, but there is still a discussion how to fix it cleanly.

When you install xmbmon you can get some information out of it:
---snip---
(5) netchild_at_ttyp0 % mbmon 

Temp.=  0.0,  0.0, 24.7; Rot.= 3479,    0,    0
Vcore = 1.64, 3.27; Volt. = 3.29, 5.00, 12.19,   0.00,  0.00
---snip---

I started the thread to know how to integrate it into ACPI.

Bye,
Alexander.

-- 
         The computer revolution is over. The computers won.

http://www.Leidinger.net                       Alexander _at_ Leidinger.net
  GPG fingerprint = C518 BC70 E67F 143F BE91  3365 79E2 9C60 B006 3FE7