fatal kernel trap: trap entry = 0x2 (memory management fault) faulting va = 0x20 type = access violation cause = store instruction pc = 0xfffffc00003afb84 ra = 0xfffffc00003afb70 sp = 0xfffffe000b7bb8a0 curthread = 0xfffffc000f726940 pid = 8, comm = syncer Stopped at g_dev_strategy+0x44: stq t0,0x20(v0) <0x20> <t0=0x1a61da400,v0=0x0> db> trace g_dev_strategy() at g_dev_strategy+0x44 launch_requests() at launch_requests+0x390 prologue botch: displacement 128 frame size botch: adjust register offsets? vinumstart() at vinumstart+0x250 prologue botch: displacement 64 frame size botch: adjust register offsets? intr_n() at 0xccec340 fatal kernel trap: trap entry = 0x2 (memory management fault) faulting va = 0x41 type = access violation cause = load instructon pc = 0xfffffc0000559c00 ra = 0xfffffc000055a250 sp = 0xfffffe000b7bb428 curthread = 0xfffffc000f726940 pid = 8, comm = syncer Stopped at decode_prologue+0x60: ldl s0,0(s1) <0x41> <s0=0x0,s1=0x41> Vinum config is only stripe/concat: [51]cicely9# vinum list 4 drives: D ecuda2 State: up /dev/da3e A: 0/17366 MB (0%) D ecuda1 State: up /dev/da2e A: 0/17366 MB (0%) D ide1 State: up /dev/ad1e A: 0/98166 MB (0%) D ide0 State: up /dev/ad0e A: 0/98166 MB (0%) 2 volumes: V d7 State: up Plexes: 1 Size: 33 GB V d2 State: up Plexes: 1 Size: 191 GB 2 plexes: P d7.p0 S State: up Subdisks: 2 Size: 33 GB P d2.p0 C State: up Subdisks: 2 Size: 191 GB 4 subdisks: S d7.p0.s0 State: up D: ecuda1 Size: 16 GB S d7.p0.s1 State: up D: ecuda2 Size: 16 GB S d2.p0.s0 State: up D: ide0 Size: 95 GB S d2.p0.s1 State: up D: ide1 Size: 95 GB I've already seen this on a scsi only machine with a striped plex. -- B.Walter BWCT http://www.bwct.de ticso_at_bwct.de info_at_bwct.deReceived on Tue Jun 10 2003 - 03:05:19 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:11 UTC