FreeBSD titan.klemm.apsfilter.org 5.1-RC FreeBSD 5.1-RC #0: Sun Jun 1 14:21:32 CEST 2003 root_at_titan.klemm.apsfilter.org:/usr/src/sys/i386/compile/TITAN5 i386 When I mount my dos partition read write and copy some data to it it immediately freezes the system. Is this a known problem ? The DOS (/dosc) partition is ~30 GB large, FAT32. Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/ad0s1 30701264 27581456 3119808 90% /dosc /dev/ad2s5 20472848 4272688 16200160 21% /dosd dmesg output: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RC #0: Sun Jun 1 14:21:32 CEST 2003 root_at_titan.klemm.apsfilter.org:/usr/src/sys/i386/compile/TITAN5 Preloaded elf kernel "/boot/kernel/kernel" at 0xc04d8000. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04d81f4. Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc04d82a0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04d8350. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 997461662 Hz CPU: Intel Pentium III (997.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536854528 (511 MB) avail memory = 516145152 (492 MB) Pentium Pro MTRR support enabled VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc03eb202 (1000022) VESA: NVidia npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS MED_2001> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 6 entries at 0xc00f0eb0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xfc000000-0xfdffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686A UDMA66 controller> port 0xd800-0xd80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device 4.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ulpt0: Hewlett-Packard PSC 2200 Series, rev 2.00/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode umass0: Hewlett-Packard PSC 2200 Series, rev 2.00/1.00, addr 2 ugen0: Syncrosoft Protected Executer, rev 1.10/1.01, addr 3 uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device 4.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcm0: <Creative EMU10K1> port 0xb800-0xb81f irq 9 at device 9.0 on pci0 pcm0: <TriTech TR28023 AC97 Codec> pci0: <multimedia, audio> at device 10.0 (no driver attached) fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x9800-0x983f mem 0xed000000-0xed0fffff,0xed800000-0xed800fff irq 10 at device 11.0 on pci0 fxp0: Ethernet address 00:d0:b7:ba:c1:c2 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 orm0: <Option ROMs> at iomem 0xcc000-0xccfff,0xc0000-0xcb7ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA66 ad2: 38166MB <ST340823A> [77545/16/63] at ata1-master UDMA66 acd0: CD-RW <SONY CD-RW CRX140E> at ata0-slave PIO4 acd1: DVD-ROM <LITEON DVD-ROM LTD122> at ata1-slave PIO4 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <HP psc 2210 1.00> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 Mounting root from ufs:/dev/ad2s2a ad0: hard error cmd=read fsbn 115471868 of 115471868-115471871 status=51 error=40 pid 640 (squid), uid 65534: exited on signal 6 pid 674 (squid), uid 65534: exited on signal 6 pid 676 (squid), uid 65534: exited on signal 6 pid 678 (squid), uid 65534: exited on signal 6 pid 680 (squid), uid 65534: exited on signal 6 ad0: hard error cmd=read fsbn 115471868 of 115471868-115471871 status=51 error=40 ad0: hard error cmd=read fsbn 115471871 status=51 error=40 ad0: hard error cmd=read fsbn 115471868 of 115471868-115471871 status=51 error=40 ad0: hard error cmd=read fsbn 115471871 status=51 error=40 My kernel config file: machine i386 cpu I686_CPU ident TITAN5 options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options SCSI_DELAY=8000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options COMPAT_LINUX # Enable Linux ABI emulation options LINPROCFS # Enable the linux-like proc filesystem # support (requires COMPAT_LINUX and # PSEUDOFS) device isa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver options VESA # To include support for VGA VESA video modes device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device device miibus # MII bus support device fxp # Intel EtherExpress PRO/100B (82557, 82558) # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners Andreas /// -- Andreas Klemm - Powered by FreeBSD 4.8-STABLE Need a magic printfilter today ? -> http://www.apsfilter.org/Received on Sun Jun 15 2003 - 12:17:46 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:12 UTC