owner-freebsd-current_at_freebsd.org wrote: > FreeBSD titan.klemm.apsfilter.org 5.1-RC FreeBSD 5.1-RC #0: Sun Jun > 1 14:21:32 CEST 2003 > root_at_titan.klemm.apsfilter.org:/usr/src/sys/i386/compile/TITAN5 i386 > > When I mount my dos partition read write and copy > some data to it it immediately freezes the system. > > Is this a known problem ? I do have exactly the same problem with my CF-Reader. I don't know why but I can hardly imagine it has to do with MSDOSFS. I have my new CF-Reader (4in1 Datafab USB Reader (umass-sim)) under suspicion. Perhaps someone could isolate this bug. If I can do anything please let me know (I'm not used to debuggers etc.) Best regards, -Harry > > The DOS (/dosc) partition is ~30 GB large, FAT32. > Filesystem 1K-blocks Used Avail Capacity Mounted on > /dev/ad0s1 30701264 27581456 3119808 90% /dosc > /dev/ad2s5 20472848 4272688 16200160 21% /dosd > > dmesg output: > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 The Regents of the University of California. All rights > reserved. FreeBSD 5.1-RC #0: Sun Jun 1 14:21:32 CEST 2003 > root_at_titan.klemm.apsfilter.org:/usr/src/sys/i386/compile/TITAN5 > Preloaded elf kernel "/boot/kernel/kernel" at 0xc04d8000. > Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04d81f4. > Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc04d82a0. > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04d8350. > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 997461662 Hz > CPU: Intel Pentium III (997.46-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x686 Stepping = 6 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536854528 (511 MB) > avail memory = 516145152 (492 MB) > Pentium Pro MTRR support enabled > VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc03eb202 (1000022) > VESA: NVidia > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <ASUS MED_2001> on motherboard > pcibios: BIOS version 2.10 > Using $PIR table, 6 entries at 0xc00f0eb0 > acpi0: power button is handled as a fixed feature programming model. > Timecounter "ACPI-fast" frequency 3579545 Hz > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 > acpi_cpu0: <CPU> on acpi0 > acpi_button0: <Power Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem > 0xfc000000-0xfdffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI > bridge> at device 1.0 on pci0 pcib1: could not get PCI interrupt > routing table for \\_SB_.PCI0.AGP_ - AE_NOT_FOUND pci1: <ACPI PCI > bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 4.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686A UDMA66 controller> port 0xd800-0xd80f at device > 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device > 4.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > ulpt0: Hewlett-Packard PSC 2200 Series, rev 2.00/1.00, addr 2, iclass > 7/1 ulpt0: using bi-directional mode > umass0: Hewlett-Packard PSC 2200 Series, rev 2.00/1.00, addr 2 > ugen0: Syncrosoft Protected Executer, rev 1.10/1.01, addr 3 > uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 5 at device > 4.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pcm0: <Creative EMU10K1> port 0xb800-0xb81f irq 9 at device 9.0 on > pci0 pcm0: <TriTech TR28023 AC97 Codec> > pci0: <multimedia, audio> at device 10.0 (no driver attached) > fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port > 0x9800-0x983f mem 0xed000000-0xed0fffff,0xed800000-0xed800fff irq 10 > at device 11.0 on pci0 fxp0: Ethernet address 00:d0:b7:ba:c1:c2 > miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on > miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port > 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes > threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sio0 port 0x3f8-0x3ff irq 4 on acpi0 > sio0: type 16550A > sio1 port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse Explorer, device ID 4 > orm0: <Option ROMs> at iomem 0xcc000-0xccfff,0xc0000-0xcb7ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on > isa0 Timecounters tick every 10.000 msec > acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently > 100.0% ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA66 > ad2: 38166MB <ST340823A> [77545/16/63] at ata1-master UDMA66 > acd0: CD-RW <SONY CD-RW CRX140E> at ata0-slave PIO4 > acd1: DVD-ROM <LITEON DVD-ROM LTD122> at ata1-slave PIO4 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <HP psc 2210 1.00> Removable Direct Access SCSI-2 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not > present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 > 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > (da0:umass-sim0:0:0:0): Medium not present > (da0:umass-sim0:0:0:0): Unretryable error > Opened disk da0 -> 6 > Mounting root from ufs:/dev/ad2s2a > ad0: hard error cmd=read fsbn 115471868 of 115471868-115471871 > status=51 error=40 pid 640 (squid), uid 65534: exited on signal 6 > pid 674 (squid), uid 65534: exited on signal 6 > pid 676 (squid), uid 65534: exited on signal 6 > pid 678 (squid), uid 65534: exited on signal 6 > pid 680 (squid), uid 65534: exited on signal 6 > ad0: hard error cmd=read fsbn 115471868 of 115471868-115471871 > status=51 error=40 ad0: hard error cmd=read fsbn 115471871 status=51 > error=40 ad0: hard error cmd=read fsbn 115471868 of > 115471868-115471871 status=51 error=40 ad0: hard error cmd=read fsbn > 115471871 status=51 error=40 > > My kernel config file: > > machine i386 > cpu I686_CPU > ident TITAN5 > > options SCHED_4BSD #4BSD scheduler > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options SOFTUPDATES #Enable FFS soft updates support > options UFS_ACL #Support for access control lists > options UFS_DIRHASH #Improve performance on big directories > options MD_ROOT #MD is a potential root device > options NFSCLIENT #Network Filesystem Client > options NFSSERVER #Network Filesystem Server > options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options PROCFS #Process filesystem (requires PSEUDOFS) > options PSEUDOFS #Pseudo-filesystem framework > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > options COMPAT_FREEBSD4 #Compatible with FreeBSD4 > options SCSI_DELAY=8000 #Delay (in ms) before probing SCSI > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time > extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > options COMPAT_LINUX # Enable Linux ABI emulation > options LINPROCFS # Enable the linux-like proc filesystem > # support (requires COMPAT_LINUX and > # PSEUDOFS) > device isa > device pci > > # Floppy drives > device fdc > > # ATA and ATAPI devices > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > options ATA_STATIC_ID #Static device numbering > > # SCSI Controllers > device ahc # AHA2940 and onboard AIC7xxx devices > > # SCSI peripherals > device scbus # SCSI bus (required) > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI access) > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc # AT keyboard controller > device atkbd # AT keyboard > device psm # PS/2 mouse > > device vga # VGA video card driver > options VESA # To include support for VGA VESA video modes > device splash # Splash screen and screen saver support > > # syscons is the default console driver, resembling an SCO console > device sc > > device agp # support several AGP chipsets > > # Floating point support - do not disable. > device npx > > # Serial (COM) ports > device sio # 8250, 16[45]50 based serial ports > > # Parallel port > device ppc > device ppbus # Parallel port bus (required) > device lpt # Printer > device ppi # Parallel port interface device > > device miibus # MII bus support > device fxp # Intel EtherExpress PRO/100B (82557, 82558) > > # Pseudo devices - the number indicates how many units to allocate. > device random # Entropy device > device loop # Network loopback > device ether # Ethernet support > device pty # Pseudo-ttys (telnet etc) > device md # Memory "disks" > > # The `bpf' device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > device bpf # Berkeley packet filter > > # USB support > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > #device udbp # USB Double Bulk Pipe devices > device ugen # Generic > device uhid # "Human Interface Devices" > device ukbd # Keyboard > device ulpt # Printer > device umass # Disks/Mass storage - Requires scbus and da > device ums # Mouse > device uscanner # Scanners > > Andreas ///Received on Sun Jun 15 2003 - 12:34:25 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:12 UTC