I have a cardbus fxp card (loaned by scottl) that doesn't get probed if it is plugged in at boot on my Dell 8500. If I pull it out and re-insert it after boot, it gets probed. Here's what happens on the initial boot: cardbus0: Resource not specified in CIS: id=10, size=2000 cardbus0: <network, ethernet> at device 0.0 (no driver attached) cbb0: CardBus card activation failed And here's what happens if I pull it out and insert it after boot: fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1000-0x103f mem 0xf6020000-0xf603ffff,0xf6040000-0xf6040fff irq 11 at device 0.0 on cardbus0 fxp0: Ethernet address 00:03:47:49:82:2b miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto After that it works fine. I'm running -current from June 21st. I've attached full dmesg output. Ken -- Kenneth Merry ken_at_kdm.org
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:13 UTC