ATA: falling to PIO4

From: Valentin Nechayev <netch_at_netch.kiev.ua>
Date: Sun, 11 May 2003 16:41:23 +0300
Hi,
this host works with ATA correct on 4.8-RELEASE and 5.0-RELEASE, but
on 5.0-CURRENT of 2003-May-03 fails to work via UDMA with HDD on first
ATA channel.
Dmesg shows it tries to set UDMA66, even without compliant cable
(cable for ata0 is of old type), and gets a bunch of UDMA ICRC errors.
Setting UDMA33 via atacontrol (`atacontrol mode 0 udma33 -') works for
a few seconds, then accidentally ICRC errors happen again and driver downgrades
mode to PIO4 again. With 4.8, UDMA33 works stably.

Dmesgs and configs are attached. If any additional info or debug print hooks
are needed, please name it.

4.8 has
==={{{
hw.ata.tags=1
hw.ata.wc=0
hw.ata.atapi_dma=1
===}}}
in loader.conf. 5.0 doesn't have it.

=== cut: dmesg.boot 5.0 (verbose) ===
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sat May  3 17:01:15 EEST 2003
    root_at_iv5.nn.kiev.ua:/var/obj/var/HEAD/src/sys/nn15
Preloaded elf kernel "/boot/kernel/kernel" at 0xc043a000.
Calibrating clock(s) ... i8254 clock: 1193010 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
Calibrating TSC clock ... TSC clock: 799436830 Hz
Timecounter "TSC"  frequency 799436830 Hz
CPU: Intel Celeron (799.44-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000461000 - 0x000000000fb31fff, 258805760 bytes (63185 pages)
avail memory = 255795200 (243 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fad00
bios32: Entry = 0xfb190 (c00fb190)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb1c0
pnpbios: Found PnP BIOS data at 0xc00fbbb0
pnpbios: Entry = f0000:bbe0  Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 
00 01 80 00 05 02 07 01 00 01 1a 01 00 01 23 01 
00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01 
07 01 08 01 09 01 0a 01 0b 01 0c 01 0e 01 0f 01 
VESA: 33 mode(s) found
VESA: v3.0, 8192k memory, flags:0x1, mode table:0xc03b6e62 (1000022)
VESA: NVidia
VESA: NVidia Corporation Riva TNT Chip Rev B1
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=11308086)
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00fded0
PCI-Only Interrupts: 5 9 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    2    A   0x60  3 4 5 7 9 10 11 14 15
slot 1      0    2    B   0x61  3 4 5 7 9 10 11 14 15
slot 1      0    2    C   0x62  3 4 5 7 9 10 11 14 15
slot 1      0    2    D   0x63  3 4 5 7 9 10 11 14 15
slot 2      2    8    A   0x68  3 4 5 7 9 10 11 14 15
slot 2      2    8    B   0x69  3 4 5 7 9 10 11 14 15
slot 2      2    8    C   0x6a  3 4 5 7 9 10 11 14 15
slot 2      2    8    D   0x6b  3 4 5 7 9 10 11 14 15
slot 3      2    0    A   0x60  3 4 5 7 9 10 11 14 15
slot 3      2    0    B   0x61  3 4 5 7 9 10 11 14 15
slot 3      2    0    C   0x62  3 4 5 7 9 10 11 14 15
slot 3      2    0    D   0x63  3 4 5 7 9 10 11 14 15
slot 4      2    1    A   0x61  3 4 5 7 9 10 11 14 15
slot 4      2    1    B   0x62  3 4 5 7 9 10 11 14 15
slot 4      2    1    C   0x63  3 4 5 7 9 10 11 14 15
slot 4      2    1    D   0x60  3 4 5 7 9 10 11 14 15
slot 5      2    6    A   0x62  3 4 5 7 9 10 11 14 15
slot 5      2    6    B   0x63  3 4 5 7 9 10 11 14 15
slot 5      2    6    C   0x60  3 4 5 7 9 10 11 14 15
slot 5      2    6    D   0x61  3 4 5 7 9 10 11 14 15
slot 6      2    7    A   0x63  3 4 5 7 9 10 11 14 15
slot 6      2    7    B   0x60  3 4 5 7 9 10 11 14 15
slot 6      2    7    C   0x61  3 4 5 7 9 10 11 14 15
slot 6      2    7    D   0x62  3 4 5 7 9 10 11 14 15
slot 7      2    9    A   0x61  3 4 5 7 9 10 11 14 15
slot 7      2    9    B   0x62  3 4 5 7 9 10 11 14 15
slot 7      2    9    C   0x63  3 4 5 7 9 10 11 14 15
slot 7      2    9    D   0x60  3 4 5 7 9 10 11 14 15
slot 8      2   10    A   0x62  3 4 5 7 9 10 11 14 15
slot 8      2   10    B   0x63  3 4 5 7 9 10 11 14 15
slot 8      2   10    C   0x60  3 4 5 7 9 10 11 14 15
slot 8      2   10    D   0x61  3 4 5 7 9 10 11 14 15
embedded    0   31    A   0x60  3 4 5 7 9 10 11 14 15
embedded    0   31    B   0x61  3 4 5 7 9 10 11 14 15
embedded    0   31    C   0x6b  3 4 5 7 9 10 11 14 15
embedded    0   31    D   0x63  3 4 5 7 9 10 11 14 15
embedded    0    1    A   0x60  3 4 5 7 9 10 11 14 15
embedded    0    1    B   0x61  3 4 5 7 9 10 11 14 15
embedded    0    1    C   0x62  3 4 5 7 9 10 11 14 15
embedded    0    1    D   0x63  3 4 5 7 9 10 11 14 15
pcib0: <Intel 82815 (i815 GMCH) Host To Hub bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e4000000, size 26, enabled
found->	vendor=0x8086, dev=0x1130, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x1131, revid=0x02
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x244e, revid=0x02
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2440, revid=0x02
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000f000, size  4, enabled
found->	vendor=0x8086, dev=0x244b, revid=0x02
	bus=0, slot=31, func=1
	class=01-01-80, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 0000d800, size  8, enabled
	map[14]: type 4, range 32, base 0000dc00, size  6, enabled
found->	vendor=0x8086, dev=0x2445, revid=0x02
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xec000000-0xedffffff
pcib1:   prefetched decode 0xea000000-0xebffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base ec000000, size 24, enabled
	map[14]: type 3, range 32, base ea000000, size 25, enabled
found->	vendor=0x10de, dev=0x002c, revid=0x15
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xfff00000-0xfffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 14 eb
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: after reset mask=03 stat0=50 stat1=00
ata1-master: ATA 01 a5
ata1: devices=01
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801BA (ICH2)> port 0xdc00-0xdc3f,0xd800-0xd8ff irq 5 at device 31.5 on pci0
pcm0: <Realtek ALC100 AC97 Codec (id = 0x414c4326)>
pcm0: Codec features 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features AMAP
pcm0: sndbuf_setmap 595000, 4000; 0xd1d8a000 -> 595000
pcm0: sndbuf_setmap 5b9000, 4000; 0xd1d8e000 -> 5b9000
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 17 devices, largest 156 bytes
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
pnpbios: handle 7 device ID INT0800 (0008d425)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x4000-0x40f7, size=0xf8, align=0
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 11 device ID PNP0f13 (130fd041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: adding io range 0x778-0x77b, size=0x4, align=0
PNP0400: adding io range 0xb78-0xb7b, size=0x4, align=0
PNP0400: adding io range 0xf78-0xf7b, size=0x4, align=0
pnpbios: handle 14 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0501 (0105d041)
PNPb006: adding irq mask 0x400
PNPb006: adding io range 0x330-0x331, size=0x2, align=0
pnpbios: handle 17 device ID PNPb006 (06b0d041)
PNPb02f: adding io range 0x201-0x207, size=0x7, align=0
PNPb02f: adding io range 0x200-0x200, size=0x1, align=0
pnpbios: handle 18 device ID PNPb02f (2fb0d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
adv0: not probed (disabled)
bt0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vt0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
ed0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
ie0: not probed (disabled)
fe0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
speaker0: <PC speaker> at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff on isa0
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0f13> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0400> failed to probe at port 0xf78-0xf7b,0xb78-0xb7b,0x778-0x77b,0x378-0x37f irq 7 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
unknown: <PNPb006> failed to probe at port 0x330-0x331 irq 10 on isa0
unknown: <PNPb02f> failed to probe at port 0x200,0x201-0x207 on isa0
Device configuration finished.
linprocfs registered
procfs registered
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging unlimited
lo0: bpf attached
Linux ELF exec handler installed
ad0: success setting UDMA66 on Intel ICH2 chip
ad0: <IBM-DJNA-351520/J56OA30K> ATA-4 disk at ata0-master
ad0: 14664MB (30033360 sectors), 29795 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=12 dmamode=34 udmamode=68 cblid=0
GEOM: new disk ad0
ar: FreeBSD check1 failed
ad2: success setting UDMA100 on Intel ICH2 chip
ad2: <IC35L040AVER07-0/ER4OA44A> ATA-5 disk at ata1-master
ad2: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA100
ad2: piomode=12 dmamode=34 udmamode=69 cblid=1
ar: FreeBSD check1 failed
ata0-slave: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata0-slave: success setting PIO4 on Intel ICH2 chip
acd0: <CD-540E/1.0A> CDROM drive at ata0 as slave
acd0: read 6890KB/s (36026KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data/audio disc
pcm0: measured ac97 link rate at 48007 Hz, will use 48000 Hz
[0] f:80 typ:6 s(CHS):0/1/1 e(CHS):186/254/63 s:63 l:3004092
[1] f:00 typ:15 s(CHS):258/0/1 e(CHS):1023/254/63 s:4144770 l:25880715
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:165 s(CHS):187/0/1 e(CHS):257/254/63 s:3004155 l:1140615
GEOM: Configure ad0s1, start 32256 length 1538095104 end 1538127359
GEOM: Configure ad0s2, start 2122122240 length 13250926080 end 15373048319
GEOM: Configure ad0s4, start 1538127360 length 583994880 end 2122122239
GEOM: new disk ad2
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:165 s(CHS):258/1/1 e(CHS):457/254/63 s:63 l:3212937
[1] f:00 typ:5 s(CHS):458/0/1 e(CHS):461/254/63 s:3213000 l:64260
GEOM: Configure ad0s5, start 32256 length 1645023744 end 1645055999
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:131 s(CHS):458/1/1 e(CHS):461/254/63 s:63 l:64197
[1] f:00 typ:5 s(CHS):462/0/1 e(CHS):720/254/63 s:3277260 l:4160835
GEOM: Configure ad0s6, start 1645088256 length 32868864 end 1677957119
MBREXT Slice 7 on ad0s2:
[0] f:00 typ:6 s(CHS):462/1/1 e(CHS):720/254/63 s:63 l:4160772
[1] f:00 typ:5 s(CHS):721/0/1 e(CHS):970/254/63 s:7438095 l:4016250
GEOM: Configure ad0s7, start 1677989376 length 2130315264 end 3808304639
MBREXT Slice 8 on ad0s2:
[0] f:00 typ:3 s(CHS):721/1/1 e(CHS):970/254/63 s:63 l:4016187
[1] f:00 typ:5 s(CHS):971/0/1 e(CHS):1023/254/63 s:11454345 l:13783770
GEOM: Configure ad0s8, start 3808336896 length 2056287744 end 5864624639
MBREXT Slice 9 on ad0s2:
[0] f:00 typ:165 s(CHS):971/1/1 e(CHS):1023/254/63 s:63 l:13783707
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:25238115 l:642600
GEOM: Configure ad0s9, start 5864656896 length 7057257984 end 12921914879
MBREXT Slice 10 on ad0s2:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:642537
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s10, start 12921947136 length 328978944 end 13250926079
GEOM: Configure ad0s4a, start 0 length 583994880 end 583994879
GEOM: Configure ad0s4c, start 0 length 583994880 end 583994879
[0] f:80 typ:2 s(CHS):0/1/1 e(CHS):249/254/63 s:63 l:4016187
[1] f:00 typ:165 s(CHS):250/0/1 e(CHS):827/254/63 s:4016250 l:9285570
[2] f:00 typ:15 s(CHS):1010/0/1 e(CHS):1023/254/63 s:16225650 l:64179675
[3] f:00 typ:166 s(CHS):828/0/1 e(CHS):1009/254/63 s:13301820 l:2923830
GEOM: Configure ad2s1, start 32256 length 2056287744 end 2056319999
GEOM: Configure ad2s2, start 2056320000 length 4754211840 end 6810531839
GEOM: Configure ad2s3, start 8307532800 length 32859993600 end 41167526399
GEOM: Configure ad2s4, start 6810531840 length 1497000960 end 8307532799
GEOM: Configure ad0s5c, start 0 length 1645023744 end 1645023743
GEOM: Configure ad0s9c, start 0 length 7057257984 end 7057257983
GEOM: Configure ad0s9e, start 0 length 7057257984 end 7057257983
GEOM: Configure ad2s2a, start 0 length 524288000 end 524287999
GEOM: Configure ad2s2c, start 0 length 4754211840 end 4754211839
GEOM: Configure ad2s2e, start 524288000 length 2097152000 end 2621439999
MBREXT Slice 5 on ad2s3:
[0] f:00 typ:131 s(CHS):1010/1/1 e(CHS):1013/254/63 s:63 l:64197
[1] f:00 typ:5 s(CHS):1014/0/1 e(CHS):1017/254/63 s:64260 l:64260
GEOM: Configure ad2s5, start 32256 length 32868864 end 32901119
MBREXT Slice 6 on ad2s3:
[0] f:00 typ:131 s(CHS):1014/1/1 e(CHS):1017/254/63 s:63 l:64197
[1] f:00 typ:5 s(CHS):1018/0/1 e(CHS):1023/254/63 s:128520 l:16386300
GEOM: Configure ad2s6, start 32933376 length 32868864 end 65802239
MBREXT Slice 7 on ad2s3:
[0] f:00 typ:165 s(CHS):1018/1/1 e(CHS):1023/254/63 s:63 l:16386237
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:16514820 l:16386300
GEOM: Configure ad2s7, start 65834496 length 8389753344 end 8455587839
MBREXT Slice 8 on ad2s3:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:16386237
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:32901120 l:1044225
GEOM: Configure ad2s8, start 8455620096 length 8389753344 end 16845373439
MBREXT Slice 9 on ad2s3:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1044162
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:33945345 l:2040255
GEOM: Configure ad2s9, start 16845405696 length 534610944 end 17380016639
MBREXT Slice 10 on ad2s3:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2040192
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:35985600 l:10297665
GEOM: Configure ad2s10, start 17380048896 length 1044578304 end 18424627199
MBREXT Slice 11 on ad2s3:
[0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:10297602
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:46283265 l:17896410
GEOM: Configure ad2s11, start 18424659456 length 5272372224 end 23697031679
MBREXT Slice 12 on ad2s3:
[0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:17896347
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s12, start 23697063936 length 9162929664 end 32859993599
GEOM: Configure ad2s7b, start 0 length 262144000 end 262143999
GEOM: Configure ad2s7c, start 0 length 8389753344 end 8389753343
GEOM: Configure ad2s7e, start 262144000 length 524288000 end 786431999
GEOM: Configure ad2s7f, start 786432000 length 7603321344 end 8389753343
Mounting root from ufs:/dev/ad2s2a
start_init: trying /sbin/init
ad0: UDMA ICRC error cmd=read fsbn 6008502 of 3004251-3004282
 retrying
ad0: UDMA ICRC error cmd=read fsbn 6008502 of 3004251-3004282
 retrying
ad0: UDMA ICRC error cmd=read fsbn 6008502 of 3004251-3004282
 retrying
ad0: UDMA ICRC error cmd=read fsbn 6008502 of 3004251-3004282
ad0: success setting PIO4 on Intel ICH2 chip
 falling back to PIO mode
=== end cut ===

=== cut: config of 5.0 ===
machine		i386
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		nn15
maxusers	0

#To statically compile in device wiring instead of /boot/device.hints
hints		"GENERIC.hints"		#Default places to look for devices.

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options		SCHED_4BSD
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	SOFTUPDATES		#Enable FFS soft updates support
#options 	UFS_ACL			#Support for access control lists
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	PROCFS			#Process filesystem (requires PSEUDOFS)
options 	PSEUDOFS		#Pseudo-filesystem framework
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	COMPAT_FREEBSD4		#Compatible with FreeBSD4
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev

# Debugging for use in -current
options 	DDB			#Enable the kernel debugger
options 	INVARIANTS		#Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
options 	WITNESS			#Enable checks to detect deadlocks and cycles
options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed

device		isa
device		pci

# ATA and ATAPI devices
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
options 	ATA_STATIC_ID		#Static device numbering

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc		# AT keyboard controller
device		atkbd		# AT keyboard
device		psm		# PS/2 mouse

device		vga		# VGA video card driver

device		splash		# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device		sc

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx

# Add suspend/resume support for the i8254.
device		pmtimer

# Serial (COM) ports
device		sio		# 8250, 16[45]50 based serial ports

# Pseudo devices - the number indicates how many units to allocate.
device		random		# Entropy device
device		ether
device		loop		# Network loopback
device		ppp		# Kernel PPP
device		tun		# Packet tunnel.
device		pty		# Pseudo-ttys (telnet etc)
device		md		# Memory "disks"

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device		bpf		# Berkeley packet filter

device		speaker		#Play IBM BASIC-style noises out your speaker

# To include support for VGA VESA video modes
options 	VESA

# Turn on extra debugging checks and output for VESA support.
options 	VESA_DEBUG

# Enable i386 a.out binary support
options 	COMPAT_AOUT

# Enable the linux-like proc filesystem support (requires COMPAT_LINUX
# and PSEUDOFS)
options		COMPAT_LINUX
options 	LINPROCFS

options		MSGBUF_SIZE=131072
#options 	GEOM_BSD
#options 	GEOM_MBR
options 	DDB_TRACE
# KTRACE_REQUEST_POOL option specifies the initial size of this store.
# The size of the pool can be adjusted both at boottime and runtime via
# the kern.ktrace_request_pool tunable and sysctl.
#
options 	KTRACE			#kernel tracing
options 	KTRACE_REQUEST_POOL=101
options 	IPFIREWALL		#firewall
options 	IPFIREWALL_VERBOSE	#enable logging to syslogd(8)
options 	IPFIREWALL_DEFAULT_TO_ACCEPT	#allow everything by default
options 	RANDOM_IP_ID
options 	TCP_DROP_SYNFIN		#drop TCP packets with SYN+FIN
# The rest are optional:
options 	MSDOSFS			#MS DOS File System (FAT, FAT32)
options 	NTIMECOUNTER=20
options 	LIBICONV
options 	SC_HISTORY_SIZE=1500	# number of history buffer lines
options 	SC_MOUSE_CHAR=0x3	# char code for text mode mouse cursor
options 	SC_KERNEL_CONS_ATTR=(FG_GREEN|BG_BLACK)
options 	SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_GREEN)
device		pcm
device		smbus		# Bus support, required for smb below.
device		intpm
device		ichsmb
device		smb
device		iicbus		# Bus support, required for ic/iic/iicsmb below.
device		iicbb
device		ic
device		iic
device		iicsmb		# smb over i2c bridge
=== end cut ===

Dmesg for working variant from 4.8:

=== cut dmesg 4.8 ===
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Wed Apr  2 19:34:21 EEST 2003
    root_at_iv.nn.kiev.ua:/var/obj/var/REL48/src/sys/nn14
Calibrating clock(s) ... TSC clock: 799320686 Hz, i8254 clock: 1193016 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 799436436 Hz
CPU: Intel Celeron (799.44-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268369920 (262080K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003ba000 - 0x0ffcffff, 264331264 bytes (64534 pages)
avail memory = 257187840 (251160K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fad00
bios32: Entry = 0xfb190 (c00fb190)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xb1c0
pnpbios: Found PnP BIOS data at 0xc00fbbb0
pnpbios: Entry = f0000:bbe0  Rev = 1.0
Other BIOS signatures found:
ACPI: 000f75b0
Preloaded elf kernel "kernel" at 0xc0393000.
Preloaded elf module "if_rl.ko" at 0xc039309c.
Preloaded elf module "miibus.ko" at 0xc039313c.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=11308086)
Using $PIR table, 10 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x1130, revid=0x02
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base e4000000, size 26
found->	vendor=0x8086, dev=0x1131, revid=0x02
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x8086, dev=0x244e, revid=0x02
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=2 	secondarybus=2
found->	vendor=0x8086, dev=0x2440, revid=0x02
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x244b, revid=0x02
	class=01-01-80, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 0000f000, size  4
found->	vendor=0x8086, dev=0x2445, revid=0x02
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=9
	map[10]: type 1, range 32, base 0000d800, size  8
	map[14]: type 1, range 32, base 0000dc00, size  6
pci0: <PCI bus> on pcib0
pcib1: <Intel 82801BA/BAM (ICH2) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found->	vendor=0x10de, dev=0x002c, revid=0x15
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=5
	map[10]: type 1, range 32, base ec000000, size 24
	map[14]: type 1, range 32, base ea000000, size 25
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> (vendor=0x10de, dev=0x002c) at 0.0 irq 5
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 0000c000, size  8
	map[14]: type 1, range 32, base ee000000, size  8
pci2: <PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xee000000-0xee0000ff irq 11 at device 10.0 on pci2
rl0: Ethernet address: 00:40:f4:65:6e:f8
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=50 stat1=00
ata1-master: ATA 01 a5
ata1: devices=01
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801BA (ICH2)> port 0xdc00-0xdc3f,0xd800-0xd8ff irq 9 at device 31.5 on pci0
pcm0: <unknown ac97 codec> (id=0x414c4326)
pcm0: ac97 codec features 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: ac97 primary codec extended features AMAP
pcm0: sndbuf_setmap 21000, 4000; 0xcc9bd000 -> 21000
pcm0: sndbuf_setmap 25000, 4000; 0xcc9c1000 -> 25000
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
isa_probe_children: probing PnP devices
BIOS Geometries:
 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 1:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
bpf: ppp1 attached
new masks: bio 68c000, tty 63129a, net 671a9a
bpf: sl0 attached
bpf: sl1 attached
bpf: faith0 attached
DUMMYNET initialized (011031)
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <IBM-DJNA-351520/J56OA30K> ATA-4 disk at ata0-master
ad0: 14664MB (30033360 sectors), 29795 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=0
ad2: success setting UDMA5 on Intel chip
Creating DISK ad2
ar: FreeBSD check1 failed
ad2: <IC35L040AVER07-0/ER4OA44A> ATA-5 disk at ata1-master
ad2: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 32 depth queue, tagged UDMA100
ad2: piomode=4 dmamode=2 udmamode=5 cblid=1
ata0-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata0-slave: success setting UDMA2 on Intel chip
acd0: <CD-540E/1.0A> CDROM drive at ata0 as slave
acd0: read 6890KB/s (36026KB/s), 128KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data/audio disc
pcm0: measured ac97 link rate at 48015 Hz, will use 48000 Hz
Mounting root from ufs:/dev/ad0s4a
ad0s1: type 0x6, start 63, end = 3004154, size 3004092 : OK
ad0s2: type 0xf, start 4144770, end = 30025484, size 25880715 : OK
ad0s4: type 0xa5, start 3004155, end = 4144769, size 1140615 : OK
ad0s5: type 0xa5, start 4144833, end = 7357769, size 3212937 : OK
ad0<extended>: type 0x5, start 7357770, end = 7422029, size 64260 : OK
ad0s6: type 0x83, start 7357833, end = 7422029, size 64197 : OK
ad0<extended>: type 0x5, start 7422030, end = 11582864, size 4160835 : OK
ad0s7: type 0x6, start 7422093, end = 11582864, size 4160772 : OK
ad0<extended>: type 0x5, start 11582865, end = 15599114, size 4016250 : OK
ad0s8: type 0x3, start 11582928, end = 15599114, size 4016187 : OK
ad0<extended>: type 0x5, start 15599115, end = 29382884, size 13783770 : OK
ad0s9: type 0xa5, start 15599178, end = 29382884, size 13783707 : OK
ad0<extended>: type 0x5, start 29382885, end = 30025484, size 642600 : OK
ad0s10: type 0x83, start 29382948, end = 30025484, size 642537 : OK
start_init: trying /sbin/init
ad2s1: type 0x2, start 63, end = 4016249, size 4016187 : OK
ad2s2: type 0xa5, start 4016250, end = 13301819, size 9285570 : OK
ad2s3: type 0xf, start 16225650, end = 80405324, size 64179675 : OK
ad2s4: type 0xa6, start 13301820, end = 16225649, size 2923830 : OK
ad2s5: type 0x83, start 16225713, end = 16289909, size 64197 : OK
ad2<extended>: type 0x5, start 16289910, end = 16354169, size 64260 : OK
ad2s6: type 0x83, start 16289973, end = 16354169, size 64197 : OK
ad2<extended>: type 0x5, start 16354170, end = 32740469, size 16386300 : OK
ad2s7: type 0xa5, start 16354233, end = 32740469, size 16386237 : OK
ad2<extended>: type 0x5, start 32740470, end = 49126769, size 16386300 : OK
ad2s8: type 0x83, start 32740533, end = 49126769, size 16386237 : OK
ad2<extended>: type 0x5, start 49126770, end = 50170994, size 1044225 : OK
ad2s9: type 0x82, start 49126833, end = 50170994, size 1044162 : OK
ad2<extended>: type 0x5, start 50170995, end = 52211249, size 2040255 : OK
ad2s10: type 0x83, start 50171058, end = 52211249, size 2040192 : OK
ad2<extended>: type 0x5, start 52211250, end = 62508914, size 10297665 : OK
ad2s11: type 0xc, start 52211313, end = 62508914, size 10297602 : OK
ad2<extended>: type 0x5, start 62508915, end = 80405324, size 17896410 : OK
ad2s12: type 0xc, start 62508978, end = 80405324, size 17896347 : OK
ad2s1: type 0x2, start 63, end = 4016249, size 4016187 : OK
ad2s2: type 0xa5, start 4016250, end = 13301819, size 9285570 : OK
ad2s3: type 0xf, start 16225650, end = 80405324, size 64179675 : OK
ad2s4: type 0xa6, start 13301820, end = 16225649, size 2923830 : OK
ad2s5: type 0x83, start 16225713, end = 16289909, size 64197 : OK
ad2<extended>: type 0x5, start 16289910, end = 16354169, size 64260 : OK
ad2s6: type 0x83, start 16289973, end = 16354169, size 64197 : OK
ad2<extended>: type 0x5, start 16354170, end = 32740469, size 16386300 : OK
ad2s7: type 0xa5, start 16354233, end = 32740469, size 16386237 : OK
ad2<extended>: type 0x5, start 32740470, end = 49126769, size 16386300 : OK
ad2s8: type 0x83, start 32740533, end = 49126769, size 16386237 : OK
ad2<extended>: type 0x5, start 49126770, end = 50170994, size 1044225 : OK
ad2s9: type 0x82, start 49126833, end = 50170994, size 1044162 : OK
ad2<extended>: type 0x5, start 50170995, end = 52211249, size 2040255 : OK
ad2s10: type 0x83, start 50171058, end = 52211249, size 2040192 : OK
ad2<extended>: type 0x5, start 52211250, end = 62508914, size 10297665 : OK
ad2s11: type 0xc, start 52211313, end = 62508914, size 10297602 : OK
ad2<extended>: type 0x5, start 62508915, end = 80405324, size 17896410 : OK
ad2s12: type 0xc, start 62508978, end = 80405324, size 17896347 : OK
=== end cut ===


-netch-
Received on Sun May 11 2003 - 04:43:07 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:07 UTC