Problems with 3com 3CCFEM556B PCMCIA combo card

Hello all.
  this card works fine for me with 4-stable but for some reason doesn't when booting with -current.

the relevant portion of the boot msg is
========================================================
pccard1: using CIS quirks for 3com, MegaHertz 3CCFEM556B, A, 001
pccard1: CIS version PCCARD 2.0 or 2.1
pccard1: CIS info: 3com, Megahertz 3CCFEM556B, A, 001
pccard1: Manufacturer code 0x101, product 0x556
pccard1: function 0:network adaptor, ccr addr 1000 mask 267
pccard1: function 0, config table entry 7: I/O card; irq mask ffff; iomask 5, iospace 0-1f; io8 io16 irqlevel
pccard1: function 1:serial port, ccr addr 1100 mask 277
pccard1: function 1, config table entry 39: I/O card; irq mask ffff; iomask 3, iospace 0-7; io8 irqlevel
ep0: <3Com Megahertz 3CCFEM556B> at port 0x100-0x11f irq11 function 0 config 7 on pccard1
ep0: eeprom failed to come ready.
device_probe_attach: ep0 attach returned 6
sio4: <3Com Megahertz 3CCFEM556B> at port 0x120-0x127 irq 11 function 1 config 39 on pccard1
sio4: type 16550A with a bogus IIR_TXRDY register
sio4: unable to activate interrupt in fast mode - using normal mode
***... followed by ad0 detection..
===========
apologies for not getting the whole boot log since it seems something is wrong with the serial port too.

in case it helps the boot messages on 4-stable are.

pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is 5d
pcic1: reset 2 pcic1:Event mask 0x9
int is 70 stat is 5d
pcic1: reset 3 int is 70 stat is 7f
pccard1: Assigning ep0: io 0x240-0x25f irq 11 flags 0x1
pcic: I/O win 0 flags 17 240-25f
ep0: Forcing IRQ to 11
ep0: Pass 1 of 2 detection failed (nonfatal)
pcic: I/O win 0 flags 17 240-25f
ep0: Forcing IRQ to 11
ep0: Ethernet address 00:00:86:3b:63:49
bpf: ep0 attached.

==============

there are obviosly port address differences.. 
IRQ seems to be same..

i shall appreciate all your help.

truely
dheeraj