Christian Laursen wrote: >I just upgraded my workstation from 5.1-RELEASE to todays -CURRENT. > >When I boot it, I get the following messages about my CD drives: > >acd0-5: CDROM with 6 CD changer <CD-C68E> at ata1-master PIO4 >acd6: DVDROM <CREATIVEDVD5240E-1> at ata1-slave PIO4 >acd0-5: FAILURE - LOAD_UNLOAD status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED> >acd0-5: FAILURE - LOAD_UNLOAD status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED> >acd0-5: FAILURE - LOAD_UNLOAD status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED> >acd0-5: FAILURE - LOAD_UNLOAD status=51<READY,DSC,ERROR> sensekey=ILLEGAL REQUEST error=4<ABORTED> > >I get the 4 failures after the 2 first slots (both containing a CD) >have been probed, and I guess there is an error for every empty slot. > >In 5.1-RELEASE the kernel didn't change through the drives while >booting. It is a little annoying, but not my main concern. > >The real problem is, that only the first slot works. When I try >to mount a cd from the second slot (acd1), I get this: > >borg# mount /drv/cd2 >cd9660: /dev/acd1: Input/output error > >It doesn't make any difference whether acd0 is mounted or not. > >If you need further information about the problem, let me know. > > I'm seeing the same thing on my laptop with an internal DVDROM/CDRW drive. Never did that before (something changed since Nov 14th-ish). Eric -- ------------------------------------------------------------------ Eric Anderson Systems Administrator Centaur Technology All generalizations are false, including this one. ------------------------------------------------------------------Received on Wed Nov 19 2003 - 07:51:00 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:30 UTC