On 24-Nov-2003 Nate Lawson wrote: > > Please also send the output of acpidump -t -d > jdp-P2.asl I booted the 5.1R live CD in an attempt to get this output. I discovered that the machine hangs the same way with 5.1R as it does with -current. (When I originally installed 5.1R, the machine had an older, non-ACPI BIOS.) I've attached the verbose boot messages from 5.1R, in case that's worth anything. Such a shame -- it gets within a hair's breadth of running init, but it just can't quite make it all the way there. John SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000e0000 len=0000000000020000 SMAP type=01 base=0000000000100000 len=000000000fee0000 SMAP type=03 base=000000000ffe0000 len=0000000000018000 SMAP type=04 base=000000000fff8000 len=0000000000008000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000fffc0000 len=0000000000040000 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Mon Jun 9 19:20:51 GMT 2003 root_at_builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b0c000. Preloaded mfs_root "/boot/mfsroot" at 0xc0b0c250. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b0c294. Calibrating clock(s) ... i8254 clock: 1193040 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz Calibrating TSC clock ... TSC clock: 400910451 Hz Timecounter "TSC" frequency 400910451 Hz CPU: Pentium II/Pentium II Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM OV,PAT,PSE36,MMX,FXSR> real memory = 268304384 (255 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000b33000 - 0x000000000fb39fff, 251686912 bytes (61447 pages) avail memory = 248926208 (237 MB) bios32: Found BIOS32 Service Directory header at 0xc00fdb40 bios32: Entry = 0xfdb50 (c00fdb50) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdb71 pnpbios: Found PnP BIOS data at 0xc00f72c0 pnpbios: Entry = f0000:6964 Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06877a4 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TYANCP TYANTBLE> on motherboard ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 ACPI timer looks BAD min = 2, max = 5, width = 3 Timecounter "ACPI-safe" frequency 3579545 Hz AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.1.0 \_SB_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.1.1 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.3 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.19.0 \_SB_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.19.1 \_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.19.2 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.19.3 \_SB_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.20.0 \_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.20.1 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.20.2 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.20.3 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.18.0 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.18.1 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.17.0 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.16.0 \_SB_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.16.1 \_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.16.2 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.16.3 ---- before setting priority for links ------------ \_SB_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1330 1330 330 1330 1330 730 930 830 1330 1 0330 10330 references: 3 priority: 0 ---- before fixup boot-disabled links ------------- \_SB_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1330 1330 330 1330 1330 730 930 830 1330 1 0330 10330 references: 3 priority: 8217 ---- after fixup boot-disabled links -------------- \_SB_.LNKC: interrupts: 5 9 11 10 12 7 6 4 3 15 14 penalty: 330 730 830 930 1330 1330 1330 1330 1330 1 0330 10330 references: 3 priority: 8217 ---- arbitrated configuration --------------------- \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.1.0 \_SB_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.1.1 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.7.3 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.19.0 \_SB_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.19.1 \_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.19.2 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.19.3 \_SB_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.20.0 \_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.20.1 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.20.2 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.20.3 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.18.0 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.18.1 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.17.0 \_SB_.LNKA irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] 0.16.0 \_SB_.LNKB irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] 0.16.1 \_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0.16.2 \_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] 0.16.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ffa0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ef80, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00000440, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1011, dev=0x0024, revid=0x03 bus=0, slot=16, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fd0ff000, size 12, enabled map[14]: type 4, range 32, base 0000ef40, size 5, enabled map[18]: type 1, range 32, base fea00000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x05 bus=0, slot=17, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e400, size 8, enabled map[14]: type 1, range 32, base febfe000, size 12, enabled found-> vendor=0x9004, dev=0x7895, revid=0x04 bus=0, slot=18, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=10 powerspec 1 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 1, range 32, base febff000, size 12, enabled found-> vendor=0x9004, dev=0x7895, revid=0x04 bus=0, slot=18, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=b, irq=10 powerspec 1 supports D0 D3 current D0 map[10]: type 3, range 32, base fd0fe000, size 12, enabled map[14]: type 4, range 32, base 0000ef20, size 5, enabled map[18]: type 1, range 32, base fe800000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x04 bus=0, slot=20, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at d evice 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfd100000-0xfe1fffff pcib1: prefetched decode 0xf2e00000-0xf4efffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base f3000000, size 24, enabled map[14]: type 1, range 32, base fe1fc000, size 14, enabled map[18]: type 1, range 32, base fd800000, size 23, enabled found-> vendor=0x102b, dev=0x051f, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device 7.1 on pci 0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 14 eb ata0-slave: ATAPI 7f 7f ata0: after reset mask=03 stat0=00 stat1=00 ata0: devices=04 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=15 ostat2=15 ata1-master: ATAPI 1e 1e ata1-slave: ATAPI 29 29 ata1: after reset mask=03 stat0=1e stat1=29 ata1-master: ATA 00 00 ata1-slave: ATA 00 00 ata1: devices=00 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 11 at de vice 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pcib2: <PCI-PCI bridge> at device 16.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xdfff pcib2: memory decode 0xfe200000-0xfe2fffff pcib2: prefetched decode 0xf4f00000-0xf4ffffff pci2: <PCI bus> on pcib2 pci2: physical bus=2 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xef40-0xef5f mem 0xfea00000-0xfeafffff,0xfd0ff000-0xfd0fffff irq 11 at device 17.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:e0:81:10:09:c2 fxp0: PCI IDs: 8086 1229 8086 0008 0005 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xe400-0xe4ff mem 0xfebfe000-0xf ebfefff irq 10 at device 18.0 on pci0 ahc0: Defaulting to MEMIO off ahc0: Reading SEEPROM...done. ahc0: internal 50 cable not present, internal 68 cable not present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 412 instructions downloaded ahc0: Features 0x16235, Bugs 0x15, Flags 0x20485540 aic7895C: Ultra Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xf ebfffff irq 10 at device 18.1 on pci0 ahc1: Defaulting to MEMIO off ahc1: Reading SEEPROM...done. ahc1: internal 50 cable not present, internal 68 cable not present ahc1: external cable not present ahc1: BIOS eeprom is present ahc1: High byte termination Enabled ahc1: Low byte termination Enabled ahc1: Downloading Sequencer Program... 412 instructions downloaded ahc1: Features 0x16235, Bugs 0x15, Flags 0x20485540 aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xef20-0xef3f mem 0xfe800000-0xfe8fffff,0xfd0fe000-0xfd0fefff irq 9 at device 20.0 on pci0 fxp1: using memory space register mapping fxp1: Ethernet address 00:a0:c9:b0:13:df fxp1: PCI IDs: 8086 1229 8086 0009 0004 fxp1: Dynamic Standby mode is disabled miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: bpf attached acpi_button0: <Sleep Button> on acpi0 ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.SBRG.PS2M._STA] (N ode 0xc12a11a0), AE_AML_REGION_LIMIT psmcpnp0 irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0065 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 90 02 3c psm: status 90 02 3c psm: status 90 02 3c psm: data 08 00 00 psm: status 00 00 28 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 sio0: irq maps: 0x201 0x211 0x201 0x201 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: irq maps: 0x201 0x209 0x201 0x201 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) fdc0: output ready timeout fdc0: cmd 3 failed at out byte 1 of 3 unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 CTL0043: start dependent (0) CTL0043: adding irq mask 0x20 CTL0043: adding dma mask 0x2 CTL0043: adding dma mask 0x8 CTL0043: adding io range 0x220-0x22f, size=0x10, align=0x1 CTL0043: adding io range 0x330-0x331, size=0x2, align=0x1 CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0043: start dependent (1) CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0043: adding io range 0x388-0x38b, size=0x4, align=0x1 CTL0043: start dependent (1) CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x30 CTL0043: start dependent (1) CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: start dependent (2) CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: adding io range 0x300-0x331, size=0x2, align=0x10 CTL0043: adding io range 0x388-0x397, size=0x4, align=0x4 CTL0043: start dependent (2) CTL0043: adding irq mask 0x6a0 CTL0043: adding dma mask 0xb CTL0043: adding io range 0x220-0x28f, size=0x10, align=0x20 CTL0043: end dependent CTL7005: start dependent (0) CTL7005: adding io range 0x201-0x201, size=0x1, align=0x1 CTL7005: start dependent (1) CTL7005: adding io range 0x200-0x20f, size=0x1, align=0x1 CTL7005: end dependent ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f 0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices adv1: Invalid baseport of 0x220 specified. Nearest valid baseport is 0x230. Fai ling probe. unknown: <Audio> failed to probe at port 0x388-0x38b,0x330-0x331,0x220-0x22f irq 5 drq 3,1 on isa0 adv1: Invalid baseport of 0x201 specified. Nearest valid baseport is 0x210. Fai ling probe. unknown: <Game> failed to probe at port 0x201 on isa0 Device configuration finished. procfs registered Timecounters tick every 10.000 msec lo0: bpf attached acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ata0-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1 ata0-master: success setting PIO4 on Intel PIIX4 chip [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 acd0: <Lite-On LTN483S 48x Max/PD02> CDROM drive at ata0 as master acd0: read 8268KB/s (4782KB/s), 120KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data disc Waiting 15 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. GEOM: Configure md0a, start 0 length 4423680 end 4423679 GEOM: Configure md0c, start 0 length 4423680 end 4423679 (probe0:ahc0:0:0:0): Retrying Command (ahc0:A:0:0): Sending WDTR 1 (ahc0:A:0:0): Received WDTR 1 filtered to 1 ahc0: target 0 using 16bit transfers (ahc0:A:0:0): Sending SDTR period c, offset 8 (probe15:ahc1:0:0:0): Retrying Command (ahc0:A:0:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 ahc0: target 0 synchronous at 20.0MHz, offset = 0x8 (ahc1:A:0:0): Sending WDTR 1 (ahc1:A:0:0): Received WDTR 1 filtered to 1 ahc1: target 0 using 16bit transfers (ahc1:A:0:0): Sending SDTR period c, offset 8 (ahc1:A:0:0): Received SDTR period c, offset 8 Filtered to period c, offset 8 ahc1: target 0 synchronous at 20.0MHz, offset = 0x8 pass0 at ahc0 bus 0 target 0 lun 0 pass0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device pass0: Serial Number AJL2K749 pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enable d pass1 at ahc1 bus 0 target 0 lun 0 pass1: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device pass1: Serial Number AJL2J407 pass1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enable d da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device da0: Serial Number AJL2K749 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) da1 at ahc1 bus 0 target 0 lun 0 da1: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device da1: Serial Number AJL2J407 da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) End of MIME messageReceived on Tue Nov 25 2003 - 12:50:51 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:31 UTC