Hi there. I have got running a PCI atheros wireless card on b/g in hostap mode and connecting 33 clients. for some razon all the customers lost the traffic, (the wireless cards has connection but dosen't send and recive any thing). When I login on the Freebsd hostap all looks happy but I can't ping any customer, so all start to work again if I restart the PC, I tried with a different harware and in differents modes 11b and 11g, but still same thing. I have installed the last driver versions, less the if_ath_pci.c <http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/ath/if_ath_pci.c> I using the version 1.5 and I see the 1.6 this morning (someone know if update this fix the problem). thanks!! My setting is very simple: bridge option on the kernel. rc.conf # Network Card rl0 # ifconfig_rl0="inet 202.49.94.22 netmask 255.255.255.0" defaultrouter="202.49.94.254" # Wireless Card ath0 # ifconfig_ath0="inet up ssid default channel 6 media autoselect mode 11b mediaopt hostap" dmsg: real memory = 369033216 (351 MB) avail memory = 348782592 (332 MB) Pentium Pro MTRR support enabled acpi0: <AMIINT VIA_K7 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00f7e00 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 10 INTA is routed to irq 9 pcib0: slot 19 INTA is routed to irq 9 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) ath0: <Atheros 5212> mem 0xdfff0000-0xdfffffff irq 9 at device 10.0 on pci0 ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 802.11 address: 00:09:5b:94:63:e5 isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8233A UDMA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem 0xdffeff00-0xdffeffff irq 9 at device 19.0 on pci0 rl0: Ethernet address: 00:20:ed:2d:8b:a2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: cmd 3 failed at out byte 1 of 3 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 fdc0: cannot reserve I/O port range (6 ports) ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 959452349 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0% GEOM: create disk ad0 dp=0xc37c5660 ad0: 19130MB <SAMSUNG SV0221H> [38869/16/63] at ata0-master UDMA100 acd0: CDROM <OEM CD-ROM F563E> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s1a ath0: promiscuous mode enabled rl0: promiscuous mode enabled -- Marcos Biscaysaqu Systems Administrator ThePacific.Net Ltd.Received on Fri Nov 28 2003 - 11:57:36 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:31 UTC