irq conflict laptop with 5.1-current

(Forwarding to -current; -questions and searching the net didn't give an 
answer.)

Hello,

Running my laptop Compaq Armada 7400 with 5.1-CURRENT from about two days 
ago.
The OHCI (USB) is on IRQ 11 and the PCCARD/CARDBUS also.
I now get a 'arp: unknown hardware address format (0x0000)' errors.
The 0x0000 can also be 0x2063 or oxfc00 or something else.
I think it's an irq conflict, but don't know how to give the different 
device other irq's.
In 5.1-RELEASE it all worked ok.
Any idea's? Is my idea about the irq conflict right or is it something 
else?
How van I solve this?

I wil include the dmesg output here.

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Wed Oct 22 05:41:44 CEST 2003
      root_at_thuis.klop.ws:/usr/obj/usr/src-current/src/sys/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc074a000.
Preloaded elf module "/boot/kernel/if_ep.ko" at 0xc074a1a4.
Preloaded elf module "/boot/kernel/elink.ko" at 0xc074a250.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc074a2fc.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc074a3a8.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc074a454.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc074a500.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (266.68-MHz 686-class CPU)
    Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
    Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 100622336 (95 MB)
avail memory = 92291072 (88 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ CPQB0B9 > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f0990
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
can't fetch resources for \\_SB_.C09B - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.C187 - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.C188 - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.C189 - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.C18A - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.C18B - AE_AML_INVALID_RESOURCE_TYPE
can't fetch resources for \\_SB_.C18C - AE_AML_INVALID_RESOURCE_TYPE
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xc88-0xc8b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: _CRS resource entry has unsupported type 14
pcib0: _CRS resource entry has unsupported type 14
pcib0: _CRS resource entry has unsupported type 14
pcib1: <ACPI PCI-PCI bridge> at device 0.1 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.C000.C013 - 
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at 
device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at 
device 12.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 14.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 
0x1000-0x100f,0-0x3,0-0x7,0-0x3,0-0x7 at device 14.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ohci0: <OHCI (generic) USB controller> mem 0x44080000-0x44080fff irq 11 at 
device 14.2 on pci0
usb0: OHCI version 1.0
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_cmbat2: <Control Method Battery> on acpi0
acpi_cmbat3: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 266677156 Hz quality 800
Timecounters tick every 4.000 msec
system power profile changed to 'economy'
ep0: <3Com Megahertz 589E> at port 0x100-0x10f irq 11 function 0 config 1 
on pccard0
ep0: Ethernet address 00:50:da:d1:01:25
ad0: FAILURE - SETFEATURES status=51<READY,DSC,ERROR> error=4<ABORTED>
GEOM: create disk ad0 dp=0xc193c170
ad0: 9590MB <FUJITSU MHN2100AT> [19485/16/63] at ata0-master BIOSPIO
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
system power profile changed to 'performance'
          -0255: *** Error: UtCallocate: Could not allocate size 30
      ACPI-1287: *** Error: Method execution failed [\\_SB_.C0D7] (Node 
0xc18a6ae0), AE_NO_MEMORY
      ACPI-1287: *** Error: Method execution failed [\\_GPE._L00] (Node 
0xc18ab640), AE_NO_MEMORY
      ACPI-0388: *** Error: AE_NO_MEMORY while evaluating method [_L00] for 
GPE[ 0]
arp: unknown hardware address format (0x2063)
arp: unknown hardware address format (0x0000)

-- 
  Ronald Klop
  Amsterdam, The Netherlands