On Mon, Oct 27, 2003 at 08:23:30PM +0100, Gerhard Schmidt wrote: > Hi, > > I´ve just tried to install FreeBSD Current on an VIA C3 533MHz. > > Kernel starts without error but when dhclient gets started I´ve get > > Panic: biodone: page disappeared! > Debugger("Panic") > > No debugger and no automatic reboot. here is the dmesg output Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Mon Jan 1 01:37:56 CET 2001 root_at_satelit.starbox.augusta.de:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a5f000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a5f1cc. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: VIA C3 Samuel 2 (533.36-MHz 686-class CPU) Origin = "CentaurHauls" Id = 0x673 Stepping = 3 Features=0x803035<FPU,DE,TSC,MSR,MTRR,PGE,MMX> real memory = 259981312 (247 MB) avail memory = 242896896 (231 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <VIA601 AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 5 entries at 0xc00fdf20 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 17 INTD is routed to irq 12 pcib0: slot 17 INTD is routed to irq 12 pcib0: slot 17 INTC is routed to irq 11 pcib0: slot 18 INTA is routed to irq 15 pcib0: slot 20 INTA is routed to irq 10 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 15 pcib1: slot 0 INTA is routed to irq 15 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8231 UDMA100 controller> port 0xd000-0xd00f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 17.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port error, restarting port 1 uhub0: port error, giving up port 1 uhub0: port error, restarting port 2 uhub0: port error, giving up port 2 uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 17.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub1: port error, restarting port 1 uhub1: port error, giving up port 1 uhub1: port error, restarting port 2 uhub1: port error, giving up port 2 pci0: <bridge, PCI-unknown> at device 17.4 (no driver attached) pci0: <multimedia, audio> at device 17.5 (no driver attached) vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xeb000000-0xeb0000ff irq 15 at device 18.0 on pci0 vr0: Ethernet address: 00:40:63:c5:80:03 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <multimedia> at device 20.0 (no driver attached) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 -------------------------------------------------------------------------- Gerhard Schmidt | Nick : estartu IRC : Estartu | Fischbachweg 3 | | PGP Public Key 86856 Hiltenfingen | estartu_at_augusta.de | auf Anfrage/ Germany | | on request
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:26 UTC