>I've gone over the probe code once again. I upgraded, and now my DVDROM (ata1-slave) is working again, but my Plextor 8/4/32A CDRW (ata1-master) still won't probe correctly. atacontrol list appears to send out the same message as before. dmesg & atacontrol list output attached. Andrew Lankford Latest ATAng kernel (without atapicam): Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #18: Mon Aug 25 19:55:14 EDT 2003 root_at_bogushost2:/usr/obj/usr/src/sys/ARL5KERNEL Preloaded elf kernel "/boot/kernel/kernel" at 0xc04e2000. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc04e2228. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04e22d4. Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc04e2380. Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc04e242c. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04e24d8. Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc04e2584. Preloaded elf module "/boot/kernel/usb.ko" at 0xc04e2634. Preloaded elf module "/boot/kernel/ums.ko" at 0xc04e26dc. Preloaded elf module "/boot/kernel/agp.ko" at 0xc04e2784. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04e282c. Calibrating clock(s) ... i8254 clock: 1193163 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 737022692 Hz CPU: Intel Pentium III (737.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 535736320 (510 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000509000 - 0x000000001f5c9fff, 520884224 bytes (127169 pages) avail memory = 515031040 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00f1430 bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdf0 pnpbios: Found PnP BIOS data at 0xc00fc070 pnpbios: Entry = f0000:c0a0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 00 01 10 00 53 25 2e 01 00 01 40 01 00 01 63 01 00 01 1c 01 09 01 0a 01 0b 01 0c 01 1d 01 0e 01 00 01 27 01 28 01 01 01 10 01 11 01 12 01 02 01 VESA: 20 mode(s) found VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc03fdc62 (1000022) VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS VESA: Intel Corporation Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS CUSL2 > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00f1360 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 7 254 0 A 0x60 3 4 5 7 9 10 11 12 slot 7 254 0 B 0x61 3 4 5 7 9 10 11 12 embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 embedded 0 31 A 0x60 3 4 5 7 9 10 11 12 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12 embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 slot 1 1 9 A 0x69 3 4 5 7 9 10 11 12 slot 1 1 9 B 0x6a 3 4 5 7 9 10 11 12 slot 1 1 9 C 0x6b 3 4 5 7 9 10 11 12 slot 1 1 9 D 0x68 3 4 5 7 9 10 11 12 slot 2 1 10 A 0x6a 3 4 5 7 9 10 11 12 slot 2 1 10 B 0x6b 3 4 5 7 9 10 11 12 slot 2 1 10 C 0x68 3 4 5 7 9 10 11 12 slot 2 1 10 D 0x69 3 4 5 7 9 10 11 12 slot 3 1 11 A 0x6b 3 4 5 7 9 10 11 12 slot 3 1 11 B 0x68 3 4 5 7 9 10 11 12 slot 3 1 11 C 0x69 3 4 5 7 9 10 11 12 slot 3 1 11 D 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12 A 0x68 3 4 5 7 9 10 11 12 slot 4 1 12 B 0x69 3 4 5 7 9 10 11 12 slot 4 1 12 C 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12 D 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13 A 0x69 3 4 5 7 9 10 11 12 slot 5 1 13 B 0x6a 3 4 5 7 9 10 11 12 slot 5 1 13 C 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13 D 0x68 3 4 5 7 9 10 11 12 slot 6 1 14 A 0x62 3 4 5 7 9 10 11 12 slot 6 1 14 B 0x63 3 4 5 7 9 10 11 12 slot 6 1 14 C 0x60 3 4 5 7 9 10 11 12 slot 6 1 14 D 0x61 3 4 5 7 9 10 11 12 embedded 1 8 A 0x68 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks BAD min = 3, max = 778, width = 775 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks BAD min = 3, max = 785, width = 782 ACPI timer looks BAD min = 3, max = 781, width = 778 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks BAD min = 3, max = 802, width = 799 ACPI timer looks BAD min = 3, max = 796, width = 793 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.2 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.2 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x1130, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 1, range 32, base f7000000, size 19, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x1132, revid=0x02 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0x01 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2440, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000b800, size 4, enabled found-> vendor=0x8086, dev=0x244b, revid=0x01 bus=0, slot=31, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000b400, size 5, enabled pcib0: matched entry for 0.31.INTD (source \\_SB_.LNKD) pcib0: slot 31 INTD is routed to irq 9 found-> vendor=0x8086, dev=0x2442, revid=0x01 bus=0, slot=31, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 map[20]: type 4, range 32, base 0000e800, size 4, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 10 found-> vendor=0x8086, dev=0x2443, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0000b000, size 5, enabled pcib0: matched entry for 0.31.INTC (source \\_SB_.LNKH) pcib0: slot 31 INTC is routed to irq 9 found-> vendor=0x8086, dev=0x2444, revid=0x01 bus=0, slot=31, func=4 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xdfff pcib1: memory decode 0xf6000000-0xf6ffffff pcib1: prefetched decode 0xf7f00000-0xf7ffffff ---- initial configuration ------------------------ \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.3 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.0 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.1 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.2 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.3 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.0 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.1 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.2 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.1 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.3 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.8.0 ---- before setting priority for links ------------ \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1550 1550 650 1550 1550 2450 750 850 1550 10550 10550 references: 5 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1550 1550 650 1550 1550 2450 750 850 1550 10550 10550 references: 5 priority: 15250 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.0 \\_SB_.LNKG irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.3 \\_SB_.LNKG irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.0 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.1 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.2 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.3 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.0 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.1 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.2 \\_SB_.LNKG irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.1 \\_SB_.LNKG irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.3 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.0 \\_SB_.LNKG irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.8.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 0000d800, size 8, enabled map[14]: type 1, range 32, base f6800000, size 12, enabled pcib1: matched entry for 1.9.INTA (source \\_SB_.LNKF) pcib1: slot 9 INTA is routed to irq 9 found-> vendor=0x100b, dev=0x0020, revid=0x00 bus=1, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 7, enabled map[14]: type 1, range 32, base f6000000, size 7, enabled pcib1: matched entry for 1.12.INTA (source \\_SB_.LNKE) pcib1: slot 12 INTA is routed to irq 9 found-> vendor=0x10b7, dev=0x9200, revid=0x74 bus=1, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d000, size 6, enabled pcib1: matched entry for 1.14.INTA (source \\_SB_.LNKC) pcib1: slot 14 INTA is routed to irq 5 found-> vendor=0x1274, dev=0x5880, revid=0x02 bus=1, slot=14, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=5 powerspec 1 supports D0 D2 D3 current D3 sis0: <NatSemi DP83815 10/100BaseTX> port 0xd800-0xd8ff mem 0xf6800000-0xf6800fff irq 9 at device 9.0 on pci1 pcib1: device sis0 requested decoded I/O range 0xd800-0xd8ff sis0: Ethernet address: 00:02:e3:1c:cf:9e miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x080017, model 0x0002, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf6000000-0xf600007f irq 9 at device 12.0 on pci1 pcib1: device xl0 requested decoded memory range 0xf6000000-0xf600007f xl0: using memory mapped I/O xl0: Ethernet address: 00:01:02:73:ee:49 xl0: media options word: a xl0: found MII/AUTO miibus1: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached pcm0: <Creative CT5880-C> port 0xd000-0xd03f irq 5 at device 14.0 on pci1 pcib1: device pcm0 requested decoded I/O range 0xd000-0xd03f pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcm0: sndbuf_setmap 6e1000, 1000; 0xc404d000 -> 6e1000 pcm0: sndbuf_setmap 6ff000, 1000; 0xc404b000 -> 6ff000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 on pci0 ata0: pre reset mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: after reset mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: pre reset mask=03 ostat0=50 ostat2=50 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: after reset mask=03 stat0=00 stat1=00 ata1-slave: ATA 01 a5 ata1: devices=06 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub2: 4 ports with 4 removable, self powered speaker0 port 0x61 on acpi0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 737022692 Hz quality 800 Timecounters tick every 10.000 msec IPv6 packet filtering initialized, default to accept, logging limited to 1 packets/entry lo0: bpf attached ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA100 on Intel ICH2 chip ad0: <IBM-DTLA-307030/TX4OA5AA> ATA-5 disk at ata0-master ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ata1-slave: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> ata1-master: pio=0x08 wdma=0x22 udma=0xffffffff cable=80pin ata1: spurious interrupt - status=0x58 error=0x01 reason=0x02 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):565/8/63 s:63 l:15020712 [1] f:00 typ:12 s(CHS):565/9/1 e(CHS):605/5/63 s:15020775 l:2104515 [2] f:00 typ:7 s(CHS):605/6/1 e(CHS):106/15/63 s:17125290 l:12916134 [3] f:80 typ:165 s(CHS):107/2/1 e(CHS):167/15/63 s:30041550 l:29994930 GEOM: Configure ad0s1, start 32256 length 7690604544 end 7690636799 GEOM: Configure ad0s2, start 7690636800 length 1077511680 end 8768148479 GEOM: Configure ad0s3, start 8768148480 length 6613060608 end 15381209087 GEOM: Configure ad0s4, start 15381273600 length 15357404160 end 30738677759 GEOM: Configure ad0s4a, start 0 length 209715200 end 209715199 GEOM: Configure ad0s4b, start 209715200 length 1073741824 end 1283457023 GEOM: Configure ad0s4c, start 0 length 15357404160 end 15357404159 GEOM: Configure ad0s4f, start 1283457024 length 209715200 end 1493172223 GEOM: Configure ad0s4g, start 1493172224 length 13864231936 end 15357404159 Mounting root from ufs:/dev/ad0s4a start_init: trying /sbin/init tun0: bpf attached splash: image decoder found: green_saver Linux ELF exec handler installed ATA channel 0: Master: ad0 <IBM-DTLA-307030/TX4OA5AA> ATA/ATAPI rev 5 Slave: no device present ATA channel 1: Master: <ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ ÿ/ÿ ÿ ÿ ÿ> ATA/ATAPI rev 15 Slave: no device presentReceived on Mon Sep 01 2003 - 06:38:33 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:21 UTC