Soren Schmidt schrieb: > I've gone over the probe code once again. > > Please test, and in case it fails to detect or misdetects anything, > mail me the output of dmesg from a verbose boot, and state what > devices actually are there. > Hi, again no luck. Same problem persists, the devices got probed correctly (two disks, each on its own channel), but cannot be accessed. Daniel SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=01 base=000000000009fc00 len=0000000000000400 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=01 base=0000000000100000 len=0000000003ef0000 SMAP type=03 base=0000000003ff3000 len=000000000000d000 SMAP type=04 base=0000000003ff0000 len=0000000000003000 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #784: Tue Sep 2 17:32:45 CEST 2003 root_at_gate.rock.net:/usr/src/sys/i386/compile/ROCK Preloaded elf kernel "/boot/kernel/kernel" at 0xc061f000. Calibrating clock(s) ... i8254 clock: 1193178 Hz Timecounter "i8254" frequency 1193178 Hz quality 0 Calibrating TSC clock ... TSC clock: 300681454 Hz CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x580 Stepping = 0 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> AMD Features=0x80000800<SYSCALL,3DNow!> Data TLB: 128 entries, 2-way associative Instruction TLB: 64 entries, 1-way associative L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative Write Allocate Enable Limit: 64M bytes Write Allocate 15-16M bytes: Enable Hardware Write Allocate Control: Disable real memory = 67043328 (63 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000646000 - 0x0000000003ea7fff, 59121664 bytes (14434 pages) avail memory = 58634240 (55 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb040 bios32: Entry = 0xfb4c0 (c00fb4c0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb4f0 pnpbios: Found PnP BIOS data at 0xc00fc130 pnpbios: Entry = f0000:c158 Rev = 1.0 Other BIOS signatures found: null: <null device, zero device> mem: <memory & I/O> VESA: information block 56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00 00 01 40 00 00 01 0b 01 00 01 21 01 00 01 2a 01 00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01 14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01 VESA: 40 mode(s) found VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc05540c2 (1000022) VESA: ATI MACH64 VESA: ATI Technologies Inc. MACH64GT 01.00 random: <entropy source> acpi0: <GBT AWRDACPI> on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9) pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdef0 PCI-Only Interrupts: 9 10 12 Location Bus Device Pin Link IRQs slot 1 0 8 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 0 8 D 0x04 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 C 0x04 3 4 5 7 9 10 11 12 14 15 slot 2 0 9 D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 B 0x04 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10 D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 A 0x04 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11 D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 A 0x01 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 B 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 C 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12 D 0x04 3 4 5 7 9 10 11 12 14 15 embedded 0 15 A 0x05 3 4 5 7 9 10 11 12 14 15 embedded 0 15 B 0x06 3 4 5 7 9 10 11 12 14 15 embedded 0 1 A 0x01 3 4 5 7 9 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 7 9 10 11 12 14 15 embedded 0 1 C 0x03 3 4 5 7 9 10 11 12 14 15 embedded 0 1 D 0x04 3 4 5 7 9 10 11 12 14 15 embedded 0 2 A 0x59 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 15 func 0 acpi0: power button is handled as a fixed feature programming model. mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x4d6,0x40b,0x480-0x48f,0x5000-0x501f,0x4000-0x403f,0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3 \_SB_.PCI0.ISA0.LNKE irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.0 \_SB_.PCI0.ISA0.LNKE irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.1 \_SB_.PCI0.ISA0.LNKE irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.2 \_SB_.PCI0.ISA0.LNKE irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.3 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.0 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.1 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.2 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.8.3 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.0 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.1 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.2 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.9.3 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.0 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.1 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.2 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.10.3 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.0 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.1 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.2 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.11.3 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.0 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.1 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.2 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.12.3 \_SB_.PCI0.ISA0.LNKE irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.0 \_SB_.PCI0.ISA0.LNKE irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.1 \_SB_.PCI0.ISA0.LNKE irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.2 \_SB_.PCI0.ISA0.LNKE irq 11: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.2.3 \_SB_.PCI0.ISA0.LNKA irq 10: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.0 \_SB_.PCI0.ISA0.LNKB irq 12: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.1 \_SB_.PCI0.ISA0.LNKC irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.2 \_SB_.PCI0.ISA0.LNKD irq 9: [ 1 3 4 5 6 7 10 11 12 14 15] low,level,sharable 0.1.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 1, range 32, base d0000000, size 28, enabled found-> vendor=0x10b9, dev=0x1541, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2410, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x10b9, dev=0x5243, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base e9103000, size 12, enabled pcib0: matched entry for 0.2.INTA (source \_SB_.PCI0.ISA0.LNKE) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x10b9, dev=0x5237, revid=0x03 bus=0, slot=2, func=0 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=11 found-> vendor=0x10b9, dev=0x1533, revid=0xc3 bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x000f, statreg=0x3200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e9100000, size 12, enabled map[14]: type 4, range 32, base 0000e000, size 5, enabled map[18]: type 1, range 32, base e9000000, size 20, enabled pcib0: matched entry for 0.8.INTA (source \_SB_.PCI0.ISA0.LNKA) pcib0: slot 8 INTA is routed to irq 10 found-> vendor=0x8086, dev=0x1229, revid=0x05 bus=0, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e400, size 8, enabled map[14]: type 1, range 32, base e9101000, size 8, enabled pcib0: matched entry for 0.9.INTA (source \_SB_.PCI0.ISA0.LNKB) pcib0: slot 9 INTA is routed to irq 12 found-> vendor=0x10ec, dev=0x8139, revid=0x10 bus=0, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=12 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e800, size 8, enabled map[14]: type 1, range 32, base e9102000, size 12, enabled pcib0: matched entry for 0.10.INTA (source \_SB_.PCI0.ISA0.LNKC) pcib0: slot 10 INTA is routed to irq 9 found-> vendor=0x9004, dev=0x8178, revid=0x00 bus=0, slot=10, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns) intpin=a, irq=9 map[10]: type 4, range 32, base 0000ec00, size 6, enabled pcib0: matched entry for 0.11.INTA (source \_SB_.PCI0.ISA0.LNKD) pcib0: slot 11 INTA is routed to irq 9 found-> vendor=0x1274, dev=0x5000, revid=0x00 bus=0, slot=11, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0105, statreg=0x0400, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=9 map[20]: type 4, range 32, base 0000f000, size 4, enabled found-> vendor=0x10b9, dev=0x5229, revid=0xc1 bus=0, slot=15, func=0 class=01-01-fa, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 agp0: <Ali M1541 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xd000-0xdfff pcib1: memory decode 0xe4000000-0xe5ffffff pcib1: prefetched decode 0xe6000000-0xe6ffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base e6000000, size 24, enabled map[14]: type 4, range 32, base 0000d000, size 8, enabled map[18]: type 1, range 32, base e5000000, size 12, enabled pcib0: matched entry for 0.1.INTA (source \_SB_.PCI0.ISA0.LNKA) pcib0: slot 1 INTA is routed to irq 10 pcib1: slot 0 INTA is routed to irq 10 found-> vendor=0x1002, dev=0x4742, revid=0x5c bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 pci1: <display, VGA> at device 0.0 (no driver attached) ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe9103000-0xe9103fff irq 11 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 fxp0: <Intel 82558 Pro/100 Ethernet> port 0xe000-0xe01f mem 0xe9000000-0xe90fffff,0xe9100000-0xe9100fff irq 10 at device 8.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:a0:c9:ef:69:8d fxp0: PCI IDs: 8086 1229 8086 0009 0005 fxp0: Dynamic Standby mode is disabled miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached rl0: <RealTek 8139 10/100BaseTX, rev. B> port 0xe400-0xe4ff mem 0xe9101000-0xe91010ff irq 12 at device 9.0 on pci0 rl0: Ethernet address: 00:e0:7d:75:fd:fb miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xe800-0xe8ff mem 0xe9102000-0xe9102fff irq 9 at device 10.0 on pci0 ahc0: Defaulting to MEMIO on ahc0: Reading SEEPROM...done. ahc0: internal 50 cable is present, internal 68 cable not present ahc0: external cable not present ahc0: BIOS eeprom is present ahc0: High byte termination Enabled ahc0: Low byte termination Enabled ahc0: Downloading Sequencer Program... 448 instructions downloaded ahc0: Features 0x5, Bugs 0x25, Flags 0x20485540 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pcm0: <AudioPCI ES1370> port 0xec00-0xec3f irq 9 at device 11.0 on pci0 pcm0: sndbuf_setmap 752000, 1000; 0xc0ffe000 -> 752000 pcm0: sndbuf_setmap 75b000, 1000; 0xc1007000 -> 75b000 atapci0: <AcerLabs Aladdin UDMA33 controller> port 0xf000-0xf00f at device 15.0 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-slave: stat=0x80 err=0x00 lsb=0x00 msb=0x00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: reset tp3 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata1: reset tp3 devices=0x1<ATA_MASTER> ata1: at 0x170 irq 15 on atapci0 mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) mss_probe: no address given, try 0x530 mss_detect, busy still set (0xff) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: irq maps: 0x201 0x211 0x201 0x201 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1: irq maps: 0x201 0x209 0x201 0x201 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/1 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 psm0: unable to allocate IRQ mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) mss_detect, busy still set (0xff) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) npx0: <math processor> on motherboard npx0: INT 16 interface atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 SAG0001: start dependent (1) SAG0001: adding io range 0x100-0x3f7, size=0x8, align=0x8 SAG0001: adding irq mask 0xbcb8 SAG0001: start dependent (1) SAG0001: adding io range 0x100-0x3f7, size=0x8, align=0x8 SAG0001: adding irq mask 0x20 SAG0001: start dependent (1) SAG0001: adding io range 0x100-0x3f7, size=0x8, align=0x8 SAG0001: adding irq mask 0x80 SAG0001: end dependent sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc8000-0xc87ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) isa_probe_children: probing PnP devices isic0: <Sedlbauer WinSpeed> at port 0x100-0x107 irq 5 on isa0 isic0: passive stack unit 0 isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) isic0: HSCX 82525 or 21525 Version 2.1 Device configuration finished. procfs registered Timecounter "TSC" frequency 300681454 Hz quality 800 Timecounters tick every 1.000 msec i4btrc: 2 ISDN trace device(s) attached IPv6 packet filtering initialized, default to accept, unlimited logging i4b: ISDN call control device attached lo0: bpf attached i4brbch: 2 raw B channel access device(s) attached i4btel: 2 ISDN telephony interface device(s) attached i4bctl: ISDN system control port attached i4bing: 2 i4b NetGraph ISDN B-channel device(s) attached DUMMYNET initialized (011031) ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited Linux ELF exec handler installed IPsec: Initialized Security Association Processing. acpi_cpu0: set speed to 100.0% acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ad0: setting UDMA33 on AcerLabs Aladdin chip GEOM: create disk ad0 dp=0xc109bc70 ad0: <IBM-DTTA-351010/T56OA73A> ATA-4 disk at ata0-master ad0: 9671MB (19807200 sectors), 20960 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin ad1: setting WDMA2 on AcerLabs Aladdin chip GEOM: create disk ad1 dp=0xc109bb70 ad1: <Seagate Technology 1275MB - ST31276A/1.37> ATA-2 disk at ata1-master ad1: 1221MB (2502308 sectors), 2482 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, WDMA2 Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error ad0: WARNING - READ_DMA recovered from missing interrupt (probe10:ahc0:0:6:0): error 22 (probe10:ahc0:0:6:0): Unretryable Error (ahc0:A:6:0): Sending SDTR period c, offset f (ahc0:A:6:0): Received SDTR period d, offset f Filtered to period d, offset f ahc0: target 6 synchronous at 16.0MHz, offset = 0xf (ahc0:A:6:0): Sending SDTR period d, offset f (ahc0:A:6:0): Received SDTR period d, offset f Filtered to period d, offset f pass0 at ahc0 bus 0 target 6 lun 0 pass0: <PIONEER CD-ROM DR-U06S 1.04> Removable CD-ROM SCSI-2 device pass0: 19.230MB/s transfers (19.230MHz, offset 15) (ahc0:A:6:0): Sending SDTR period d, offset f (ahc0:A:6:0): Received SDTR period d, offset f Filtered to period d, offset f (cd0:ahc0:0:6:0): error 6 (cd0:ahc0:0:6:0): Unretryable Error cd0 at ahc0 bus 0 target 6 lun 0 cd0: <PIONEER CD-ROM DR-U06S 1.04> Removable CD-ROM SCSI-2 device cd0: 19.230MB/s transfers (19.230MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present ad0: WARNING - READ_DMA recovered from missing interrupt ad0: WARNING - READ_DMA recovered from missing interrupt ad0: WARNING - READ_DMA recovered from missing interrupt ad0: WARNING - READ_DMA recovered from missing interrupt GEOM: new disk ad1 ad1: WARNING - READ_DMA recovered from missing interrupt ad1: WARNING - READ_DMA recovered from missing interrupt Mounting root from ufs:/dev/ad0a setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6 Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input mountroot>Received on Tue Sep 02 2003 - 06:43:57 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:21 UTC