Soren, I've noticed the same thing with the last two builds. After detaching and then re-attaching the second channel, both my slave dvdrom and my truant master cdrw show up and appear to work ok. I just tried your patch (didn't apply cleanly so I edited the file myself). No apparent change. Attached is my dmesg -a output for this bootup (includes results of "atacontrol detach 1 ; atacontrol attach 1") Andrew Lankford Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #7: Thu Sep 18 11:34:01 EDT 2003 root_at_bogushost2:/usr/obj/usr/src/sys/ARL5KERNEL Preloaded elf kernel "/boot/kernel/kernel" at 0xc04de000. Preloaded elf module "/boot/kernel/vesa.ko" at 0xc04de21c. Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc04de2c8. Preloaded elf module "/boot/kernel/miibus.ko" at 0xc04de374. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04de420. Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc04de4cc. Preloaded elf module "/boot/kernel/usb.ko" at 0xc04de57c. Preloaded elf module "/boot/kernel/ums.ko" at 0xc04de624. Preloaded elf module "/boot/kernel/agp.ko" at 0xc04de6cc. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04de774. Calibrating clock(s) ... i8254 clock: 1193296 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 737021995 Hz CPU: Intel Pentium III (737.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 535736320 (510 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000505000 - 0x000000001f5c9fff, 520900608 bytes (127173 pages) avail memory = 515051520 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00f1430 bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdf0 pnpbios: Found PnP BIOS data at 0xc00fc070 pnpbios: Entry = f0000:c0a0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 00 01 10 00 53 25 2e 01 00 01 40 01 00 01 63 01 00 01 1c 01 09 01 0a 01 0b 01 0c 01 1d 01 0e 01 00 01 27 01 28 01 01 01 10 01 11 01 12 01 02 01 VESA: 20 mode(s) found VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc0403c62 (1000022) VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS VESA: Intel Corporation Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0 null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS CUSL2 > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086) pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00f1360 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 7 254 0 A 0x60 3 4 5 7 9 10 11 12 slot 7 254 0 B 0x61 3 4 5 7 9 10 11 12 embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 embedded 0 31 A 0x60 3 4 5 7 9 10 11 12 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12 embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 slot 1 1 9 A 0x69 3 4 5 7 9 10 11 12 slot 1 1 9 B 0x6a 3 4 5 7 9 10 11 12 slot 1 1 9 C 0x6b 3 4 5 7 9 10 11 12 slot 1 1 9 D 0x68 3 4 5 7 9 10 11 12 slot 2 1 10 A 0x6a 3 4 5 7 9 10 11 12 slot 2 1 10 B 0x6b 3 4 5 7 9 10 11 12 slot 2 1 10 C 0x68 3 4 5 7 9 10 11 12 slot 2 1 10 D 0x69 3 4 5 7 9 10 11 12 slot 3 1 11 A 0x6b 3 4 5 7 9 10 11 12 slot 3 1 11 B 0x68 3 4 5 7 9 10 11 12 slot 3 1 11 C 0x69 3 4 5 7 9 10 11 12 slot 3 1 11 D 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12 A 0x68 3 4 5 7 9 10 11 12 slot 4 1 12 B 0x69 3 4 5 7 9 10 11 12 slot 4 1 12 C 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12 D 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13 A 0x69 3 4 5 7 9 10 11 12 slot 5 1 13 B 0x6a 3 4 5 7 9 10 11 12 slot 5 1 13 C 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13 D 0x68 3 4 5 7 9 10 11 12 slot 6 1 14 A 0x62 3 4 5 7 9 10 11 12 slot 6 1 14 B 0x63 3 4 5 7 9 10 11 12 slot 6 1 14 C 0x60 3 4 5 7 9 10 11 12 slot 6 1 14 D 0x61 3 4 5 7 9 10 11 12 embedded 1 8 A 0x68 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks BAD min = 3, max = 792, width = 789 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks BAD min = 3, max = 773, width = 770 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks GOOD min = 3, max = 5, width = 2 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.2 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.3 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.2 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x1130, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f8000000, size 26, enabled map[14]: type 1, range 32, base f7000000, size 19, enabled pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA) pcib0: slot 2 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x1132, revid=0x02 bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0x01 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2440, revid=0x01 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000b800, size 4, enabled found-> vendor=0x8086, dev=0x244b, revid=0x01 bus=0, slot=31, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000b400, size 5, enabled pcib0: matched entry for 0.31.INTD (source \\_SB_.LNKD) pcib0: slot 31 INTD is routed to irq 9 found-> vendor=0x8086, dev=0x2442, revid=0x01 bus=0, slot=31, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 map[20]: type 4, range 32, base 0000e800, size 4, enabled pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB) pcib0: slot 31 INTB is routed to irq 10 found-> vendor=0x8086, dev=0x2443, revid=0x01 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0000b000, size 5, enabled pcib0: matched entry for 0.31.INTC (source \\_SB_.LNKH) pcib0: slot 31 INTC is routed to irq 9 found-> vendor=0x8086, dev=0x2444, revid=0x01 bus=0, slot=31, func=4 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=9 agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf7000000-0xf707ffff,0xf8000000-0xfbffffff irq 11 at device 2.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xdfff pcib1: memory decode 0xf6000000-0xf6ffffff pcib1: prefetched decode 0xf7f00000-0xf7ffffff ---- initial configuration ------------------------ \\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.3 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.0 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.1 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.2 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.3 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.0 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.1 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.2 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.0 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.1 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.3 \\_SB_.LNKF irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.3 \\_SB_.LNKC irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.8.0 ---- before setting priority for links ------------ \\_SB_.LNKF: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210 references: 5 priority: 0 \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210 references: 5 priority: 0 \\_SB_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKF: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210 references: 5 priority: 18277 \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210 references: 5 priority: 18277 \\_SB_.LNKC: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 2210 2210 1210 2210 2210 2610 1410 1510 2210 11210 11210 references: 1 priority: 3655 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.0 \\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.9.3 \\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.0 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.1 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.2 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.10.3 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.0 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.1 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.2 \\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.11.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.0 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.1 \\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.12.3 \\_SB_.LNKF irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.0 \\_SB_.LNKG irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.13.3 \\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.14.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.8.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 0000d800, size 8, port disabled map[14]: type 1, range 32, base f6800000, size 12, memory disabled found-> vendor=0x100b, dev=0x0020, revid=0x00 bus=1, slot=9, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0b (2750 ns), maxlat=0x34 (13000 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d400, size 7, enabled map[14]: type 1, range 32, base f6000000, size 7, enabled pcib1: matched entry for 1.12.INTA (source \\_SB_.LNKE) pcib1: slot 12 INTA is routed to irq 9 found-> vendor=0x10b7, dev=0x9200, revid=0x74 bus=1, slot=12, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d000, size 6, port disabled found-> vendor=0x1274, dev=0x5880, revid=0x02 bus=1, slot=14, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0004, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns) intpin=a, irq=255 powerspec 1 supports D0 D2 D3 current D3 sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xd800-0xd8ff mem 0xf6800000-0xf6800fff at device 9.0 on pci1 pcib1: device sis0 requested decoded I/O range 0xd800-0xd8ff pcib1: matched entry for 1.9.INTA (source \\_SB_.LNKF) pcib1: slot 9 INTA is routed to irq 5 sis0: Silicon Revision: DP83815D sis0: Ethernet address: 00:02:e3:1c:cf:9e miibus0: <MII bus> on sis0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x080017, model 0x0002, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached pci1: <network, ethernet> at device 12.0 (no driver attached) pcm0: <Creative CT5880-C> port 0xd000-0xd03f at device 14.0 on pci1 pcib1: device pcm0 requested decoded I/O range 0xd000-0xd03f pcm0: <SigmaTel STAC9721/23 AC97 Codec (id = 0x83847609)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features AMAP pcib1: matched entry for 1.14.INTA (source \\_SB_.LNKC) pcib1: slot 14 INTA is routed to irq 11 pcm0: sndbuf_setmap 696000, 1000; 0xc4042000 -> 696000 pcm0: sndbuf_setmap 6b4000, 1000; 0xc4040000 -> 6b4000 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xb800-0xb80f at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-slave: stat=0x00 err=0x8e lsb=0x00 msb=0x00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb400-0xb41f irq 9 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0xe800-0xe80f irq 10 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb000-0xb01f irq 9 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub2: 4 ports with 4 removable, self powered unknown: not probed (disabled) speaker0 port 0x61 on acpi0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: irq maps: 0x41 0x51 0x41 0x41 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x41 0x49 0x41 0x41 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it vga: vga0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xd0000-0xd07ff,0xcc000-0xcffff,0xc0000-0xcbfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 737021995 Hz quality 800 Timecounters tick every 10.000 msec IPv6 packet filtering initialized, default to accept, logging limited to 1 packets/entry lo0: bpf attached ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled ata1: spurious interrupt - status=0x00 error=0x01 acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ad0: setting UDMA100 on Intel ICH2 chip GEOM: create disk ad0 dp=0xc40bec70 ad0: <IBM-DTLA-307030/TX4OA5AA> ATA-5 disk at ata0-master ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: pio=0x08 wdma=0xffffffff udma=0xffffffff cable=80pin acd0: setting PIO4 on Intel ICH2 chip acd0: <HITACHI DVD-ROM GD-7500/0005> DVDROM drive at ata1 as slave acd0: read 2412KB/s (6890KB/s), 512KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm audio disc [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):565/8/63 s:63 l:15020712 [1] f:00 typ:12 s(CHS):565/9/1 e(CHS):605/5/63 s:15020775 l:2104515 [2] f:00 typ:7 s(CHS):605/6/1 e(CHS):106/15/63 s:17125290 l:12916134 [3] f:80 typ:165 s(CHS):107/2/1 e(CHS):167/15/63 s:30041550 l:29994930 GEOM: Configure ad0s1, start 32256 length 7690604544 end 7690636799 GEOM: Configure ad0s2, start 7690636800 length 1077511680 end 8768148479 GEOM: Configure ad0s3, start 8768148480 length 6613060608 end 15381209087 GEOM: Configure ad0s4, start 15381273600 length 15357404160 end 30738677759 GEOM: Configure ad0s4a, start 0 length 209715200 end 209715199 GEOM: Configure ad0s4b, start 209715200 length 1073741824 end 1283457023 GEOM: Configure ad0s4c, start 0 length 15357404160 end 15357404159 GEOM: Configure ad0s4f, start 1283457024 length 209715200 end 1493172223 GEOM: Configure ad0s4g, start 1493172224 length 13864231936 end 15357404159 Mounting root from ufs:/dev/ad0s4a start_init: trying /sbin/init Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point . kernel dumps on /dev/ad0s4b swapon: adding /dev/ad0s4b as swap device Starting file system checks: /dev/ad0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s4a: clean, 49784 free (344 frags, 6180 blocks, 0.3% fragmentation) /dev/ad0s4f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s4f: clean, 171422 free (134 frags, 21411 blocks, 0.1% fragmentation) /dev/ad0s4g: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s4g: clean, 4031416 free (32624 frags, 499849 blocks, 0.5% fragmentation) Setting hostname: bogushost2. net.inet.tcp.blackhole: 0 -> 2 net.inet.udp.blackhole: 0 -> 1 net.inet.tcp.log_in_vain: 0 -> 1 net.inet.tcp.inflight_enable: 0 -> 1 kern.module_path: /boot/kernel;/boot/kernel;/boot/modules -> /boot/kernel xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xf6000000-0xf600007f irq 9 at device 12.0 on pci1 pcib1: device xl0 requested decoded memory range 0xf6000000-0xf600007f xl0: using memory mapped I/O xl0: Ethernet address: 00:01:02:73:ee:49 xl0: media options word: a xl0: found MII/AUTO xl0: bpf attached miibus1: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus1 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_MTU> inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::201:2ff:fe73:ee49%xl0 prefixlen 64 tentative scopeid 0x3 ether 00:01:02:73:ee:49 media: Ethernet autoselect (none) status: no carrier Starting ppp as "arlankfo" tun0: bpf attached ppp: Pausing until /bin/rm finishes route: writing to routing socket : No such process Firewall rules loaded, starting divert daemons: . Firewall logging enabled net.inet.ip.fw.enable: 1 -> 1 Additional routing options: IP gateway=YES . hw.bus.devctl_disable: 0 -> 1 Mounting NFS file systems: . Starting syslogd. Sep 18 11:49:38 bogushost2 syslogd: kernel boot file is /boot/kernel/kernel Checking for core dump... checking for kernel dump on device /dev/ad0s4b mediasize = 1073741824 sectorsize = 512 magic mismatch on last dump header on /dev/ad0s4b savecore: no dumps found Clearing /tmp. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting local daemons: . Starting lpd. Updating motd. Starting ntpd. Starting usbd. Configuring syscons: keybell \^[[=39772;5B cursor font8x16 font8x14 font8x8 blanktime screensaver splash: image decoder found: green_saver allscreens . Starting sshd. Initial i386 initialization: . Additional ABI support: linux Linux ELF exec handler installed ipfw: 300 Deny UDP 127.0.0.1:123 140.162.8.3:123 out via tun0 Sep 18 11:49:42 bogushost2 ntpd[434]: sendto(140.162.8.3): Permission denied . Starting cron. Local package initialization: xdm . Additional TCP options: . net.inet.ip.fw.verbose: 1 -> 0 Starting background file system checks in 60 seconds. Thu Sep 18 11:49:43 EDT 2003 Sep 18 11:49:46 bogushost2 ntpd[434]: sendto(198.82.162.213): Permission denied Sep 18 11:49:53 bogushost2 ntpd[434]: sendto(129.6.15.28): Permission denied Sep 18 11:49:56 bogushost2 login: ROOT LOGIN (root) ON ttyv0 acd0: WARNING - removed from configuration ata1-master: WARNING - FLUSHCACHE recovered from missing interrupt ata1-master: FAILURE - FLUSHCACHE status=41<READY,ERROR> error=4<ABORTED> ata1: reset tp1 mask=03 ostat0=41 ostat1=50 stray irq 15 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin acd0: setting PIO4 on Intel ICH2 chip acd0: <PLEXTOR CD-R PX-W8432T/1.09> CDRW drive at ata1 as master acd0: read 5512KB/s (5512KB/s) write 1377KB/s (1377KB/s), 4096KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM unknown acd1: setting PIO4 on Intel ICH2 chip acd1: <HITACHI DVD-ROM GD-7500/0005> DVDROM drive at ata1 as slave acd1: read 2412KB/s (6890KB/s), 512KB buffer, PIO4 acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd1: Writes: acd1: Audio: play, 256 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: CD-ROM 120mm audio discReceived on Thu Sep 18 2003 - 07:01:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:22 UTC