I had not tried ACPI for about 3 weeks due to my travel schedule. I saw a number of updates and thought I'd give it a spin. System: IBM T30 running CURRENT as of last Friday (9/26) System has a master on ata0 and no devices at all on ata1. System will no longer recover from suspend. (This is probably an ATAng issue, not an ACPI one.) System resumes with the following messages: pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTB is routed to irq 11 pcib0: slot 29 INTC is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 usb0: cannot start usb1: cannot start usb2: cannot start pcib2:slot 0 INTA is routed to irq 11 pcib2:slot 0 INTB is routed to irq 11 pcib2:slot 2 INTA is routed to irq 11 pcib2:slot 8 INTA is routed to irq 11 ata0: resetting devices... usb0: host system error usb0: host controller process error usb0: host controller halted usb1: host system error usb1: host controller process error usb1: host controller halted usb2: host system error usb2: host controller process error usb2: host controller halted done ata1: resetting devices... dmesg, config, acpidump output and other stuff available on request. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: oberman_at_es.net Phone: +1 510 486-8634Received on Mon Sep 29 2003 - 09:41:16 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:23 UTC