When booting from 5.2-CURRENT I get the following errors. I can't point to any consequences of these errors, but since the 8100 is a common notebook I thought I should post them. Mike Squires Sound device error(?) - AC97 problems, have seen this in the past pcm0: <Yamaha DS-1E (YMF744)> port 0xbf3c-0xbf3f,0xbf40-0xbf7f mem 0xefdf8000-0xefdfffff irq 11 at device 12.0 on pci0 pcm0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0xefdf8000 ds1: setmap (251000, 3de4), nseg=1, error=0 pcm0: AC97 reset timed out. pcm0: ac97 codec invalid or not present (id == 0) pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap 131b4000, 1000; 0xc3200000 -> 131b4000 pcm0: sndbuf_setmap 13596000, 1000; 0xc3202000 -> 13596000 pcm0: sndbuf_setmap 13678000, 1000; 0xc3204000 -> 13678000 pcm0: sndbuf_setmap 136fa000, 1000; 0xc3206000 -> 136fa000 pcm0: sndbuf_setmap 136dc000, 1000; 0xc3208000 -> 136dc000 pcm0: sndbuf_setmap 12a31000, 1000; 0xc31fd000 -> 12a31000 Mouse (PS/2) and floppy error (notebook is connected to a Belkin Omniview PS/2 KVM switch); the fdc0 error occurs twice psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: failed to get data. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:00, syncbits:00 fdc0: cannot reserve I/O port range (1 ports) "ar: FreeBSD check1 failed" - occurs for each IDE disk, but appears to have no consequences (second HD replaces internal DVD/CD drive): ad0: <TOSHIBA MK1214GAP/N0.15 G> ATA-4 disk at ata0-master ad0: 11513MB (23579136 sectors), 23392 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed <complete dmesg follows> null: <null device, zero device> random: <entropy source, Software, Yarrow> mem: <memory & I/O> Pentium Pro MTRR support enabled cpu0 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750> on motherboard acpi0: [GIANT-LOCKED] pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Found $PIR table, 10 entries at 0xc00f0140 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 11 A 0x60 11 embedded 0 11 B 0x61 11 embedded 0 9 A 0x62 11 embedded 1 0 A 0x62 11 embedded 0 7 A 0xff 3 embedded 0 13 A 0x63 11 embedded 0 12 A 0x63 11 embedded 0 5 D 0x63 11 slot 1 0 15 A 0x63 11 slot 2 0 16 A 0x60 11 slot 3 0 6 A 0x62 11 slot 3 0 6 B 0x63 11 slot 3 0 6 C 0x60 11 slot 3 0 6 D 0x61 11 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 5 func 0 acpi0: Power Button (fixed) ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 ACPI timer looks BAD min = 2, max = 6, width = 4 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.11.0 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.11.1 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.9.0 \\_SB_.LNKE irq 3: [ 3 4] low,level,sharable 0.7.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.13.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.12.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.5.3 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.15.0 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.16.0 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.11.0 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.11.1 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.9.0 \\_SB_.LNKE irq 3: [ 3 4] low,level,sharable 0.7.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.13.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.12.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.5.3 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.15.0 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 0.16.0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base d0000000, size 28, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x3210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1179, dev=0x0611, revid=0x51 bus=0, slot=3, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0480, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000fff0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=5, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ff80, size 5, enabled pcib0: matched entry for 0.5.INTD (src \\_SB_.LNKD) pcib0: slot 5 INTD is routed to irq 11 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=5, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 0000fe70, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x03 bus=0, slot=5, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1179, dev=0x061b, revid=0x03 bus=0, slot=6, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x02d0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base ffefff00, size 8, enabled map[14]: type 4, range 32, base 000002f8, size 3, enabled map[18]: type 4, range 32, base 00001c00, size 8, enabled pcib0: matched entry for 0.7.INTA (src \\_SB_.LNKE) pcib0: slot 7 INTA is routed to irq 3 found-> vendor=0x11c1, dev=0x0441, revid=0x01 bus=0, slot=7, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0xfc (63000 ns), maxlat=0x0e (3500 ns) intpin=a, irq=3 powerspec 2 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 0000bfe0, size 5, enabled pcib0: matched entry for 0.9.INTA (src \\_SB_.LNKC) pcib0: slot 9 INTA is routed to irq 11 found-> vendor=0x1179, dev=0x0d01, revid=0x00 bus=0, slot=9, func=0 class=0d-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1179, dev=0x0617, revid=0x20 bus=0, slot=11, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1179, dev=0x0617, revid=0x20 bus=0, slot=11, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0490, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base efdf8000, size 15, enabled map[14]: type 4, range 32, base 0000bf40, size 6, enabled map[18]: type 4, range 32, base 0000bf3c, size 2, enabled pcib0: matched entry for 0.12.INTA (src \\_SB_.LNKD) pcib0: slot 12 INTA is routed to irq 11 found-> vendor=0x1073, dev=0x0010, revid=0x02 bus=0, slot=12, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x05 (1250 ns), maxlat=0x19 (6250 ns) intpin=a, irq=11 powerspec 1 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 0000be80, size 7, enabled map[14]: type 1, range 32, base efdf7f80, size 7, enabled pcib0: matched entry for 0.15.INTA (src \\_SB_.LNKD) pcib0: slot 15 INTA is routed to irq 11 found-> vendor=0x10b7, dev=0x9200, revid=0x6c bus=0, slot=15, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0 agp0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000 agp0: allocating GATT for aperture of size 256M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf0000000-0xf7ffffff pcib1: prefetched decode 0xfff00000-0xfffff ACPI PCI link initial configuration: \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 1.0.0 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base f0000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xf0000000-0xf7ffffff pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKD) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x5333, dev=0x8c10, revid=0x11 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab1: <PCI-ISA bridge> at device 5.0 on pci0 isa: isa0 already exists; skipping it device_probe_and_attach: isab1 attach returned 6 atapci0: <Intel PIIX4 UDMA33 controller> port 0xfff0-0xffff at device 5.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfff0 atapci0: ZERO BAR: resource checks suppressed. atapci0: Lazy allocation of 0x8 bytes rid 0x10 type 4 at 0x1f0 atapci0: ZERO BAR: resource checks suppressed. atapci0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x3f4 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] atapci0: ZERO BAR: resource checks suppressed. atapci0: Lazy allocation of 0x8 bytes rid 0x18 type 4 at 0x170 atapci0: ZERO BAR: resource checks suppressed. atapci0: Lazy allocation of 0x4 bytes rid 0x1c type 4 at 0x374 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata1-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata1-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata1-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata1-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata1-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xff80 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.00/1.00, addr 2 uhub1: 4 ports with 4 removable, self powered pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 19 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xefe00000-0xefefffff pcib2: prefetched decode 0xfff00000-0xfffff ACPI PCI link initial configuration: \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.6.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.6.1 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.6.2 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.6.3 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.3.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.1.0 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.1.1 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.1.2 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.1.3 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.2.0 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.2.1 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.2.2 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.2.3 ACPI PCI link before setting link priority: ACPI PCI link before fixup for boot-disabled links: ACPI PCI link after fixup for boot-disabled links: ACPI PCI link arbitrated configuration: \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.6.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.6.1 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.6.2 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.6.3 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.3.0 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.1.0 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.1.1 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.1.2 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.1.3 \\_SB_.LNKA irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.2.0 \\_SB_.LNKB irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.2.1 \\_SB_.LNKC irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.2.2 \\_SB_.LNKD irq 11: [ 5 6 7 10 11 12] low,level,sharable 2.2.3 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000ce00, size 8, enabled pcib2: device (null) requested decoded I/O range 0xce00-0xceff map[14]: type 1, range 32, base efefff00, size 8, enabled pcib2: device (null) requested decoded memory range 0xefefff00-0xefefffff map[18]: type 1, range 32, base efefe000, size 12, enabled pcib2: device (null) requested decoded memory range 0xefefe000-0xefefefff pcib2: matched entry for 2.1.INTA (src \\_SB_.LNKD) pcib2: slot 1 INTA is routed to irq 11 found-> vendor=0x1000, dev=0x000f, revid=0x04 bus=2, slot=1, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x90 (4320 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=11 map[10]: type 4, range 32, base 0000cdf8, size 3, enabled pcib2: device (null) requested decoded I/O range 0xcdf8-0xcdff map[14]: type 4, range 32, base 0000cdf4, size 2, enabled pcib2: device (null) requested decoded I/O range 0xcdf4-0xcdf7 map[18]: type 4, range 32, base 0000cde8, size 3, enabled pcib2: device (null) requested decoded I/O range 0xcde8-0xcdef map[1c]: type 4, range 32, base 0000cde4, size 2, enabled pcib2: device (null) requested decoded I/O range 0xcde4-0xcde7 map[20]: type 4, range 32, base 0000cdd0, size 4, enabled pcib2: device (null) requested decoded I/O range 0xcdd0-0xcddf pcib2: matched entry for 2.3.INTA (src \\_SB_.LNKB) pcib2: slot 3 INTA is routed to irq 11 found-> vendor=0x1095, dev=0x0648, revid=0x01 bus=2, slot=3, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 sym0: <875> port 0xce00-0xceff mem 0xefefe000-0xefefefff,0xefefff00-0xefefffff irq 11 at device 1.0 on pci2 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xefefff00 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xefefe000 sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/4e/80/01/00/24 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/46/80/01/08/24 sym0: Delay (GEN=11): 254 msec, 34993 KHz sym0: Delay (GEN=11): 263 msec, 33795 KHz sym0: Delay (GEN=11): 263 msec, 33795 KHz sym0: [GIANT-LOCKED] sym0: enabling clock multiplier sym0: Downloading SCSI SCRIPTS. atapci1: <CMD 648 UDMA66 controller> port 0xcdd0-0xcddf,0xcde4-0xcde7,0xcde8-0xcdef,0xcdf4-0xcdf7,0xcdf8-0xcdff irq 11 at device 3.0 on pci2 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcdd0 atapci1: [MPSAFE] atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xcdf8 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcdf4 ata2: reset tp1 mask=03 ostat0=7f ostat1=7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata2: reset tp2 mask=00 stat0=ff stat1=ff devices=0x0 ata2: at 0xcdf8 on atapci1 ata2: [MPSAFE] atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcde8 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcde4 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-master: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3-slave: stat=0x7f err=0x7f lsb=0x7f msb=0x7f ata3: reset tp2 mask=00 stat0=ff stat1=ff devices=0x0 ata3: at 0xcde8 on atapci1 ata3: [MPSAFE] pci0: <simple comms> at device 7.0 (no driver attached) pci0: <unknown> at device 9.0 (no driver attached) cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf8000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.11.INTA (src \\_SB_.LNKA) pcib0: slot 11 INTA is routed to irq 11 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x06171179 0x04900007 0x06070020 0x00824000 0x10: 0xf8000000 0x04800080 0x00141400 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00110001 0x00800000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860011f0 0x0c000000 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0 cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf8001000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: matched entry for 0.11.INTB (src \\_SB_.LNKB) pcib0: slot 11 INTB is routed to irq 11 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x06171179 0x04900007 0x06070020 0x00824000 0x10: 0xf8001000 0x04800080 0x00151500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b 0x40: 0x00011179 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00110001 0x00800000 0x00000000 0x01000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x860021f0 0x0c000000 0x00000000 0x0000d100 0xb0: 0x3f3f3fcf 0x0a081020 0x00010100 0x00023f00 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008 pcm0: <Yamaha DS-1E (YMF744)> port 0xbf3c-0xbf3f,0xbf40-0xbf7f mem 0xefdf8000-0xefdfffff irq 11 at device 12.0 on pci0 pcm0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0xefdf8000 ds1: setmap (251000, 3de4), nseg=1, error=0 pcm0: AC97 reset timed out. pcm0: ac97 codec invalid or not present (id == 0) pcm0: [GIANT-LOCKED] pcm0: sndbuf_setmap 131b4000, 1000; 0xc3200000 -> 131b4000 pcm0: sndbuf_setmap 13596000, 1000; 0xc3202000 -> 13596000 pcm0: sndbuf_setmap 13678000, 1000; 0xc3204000 -> 13678000 pcm0: sndbuf_setmap 136fa000, 1000; 0xc3206000 -> 136fa000 pcm0: sndbuf_setmap 136dc000, 1000; 0xc3208000 -> 136dc000 pcm0: sndbuf_setmap 12a31000, 1000; 0xc31fd000 -> 12a31000 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xbe80-0xbeff mem 0xefdf7f80-0xefdf7fff irq 11 at device 15.0 on pci0 xl0: Reserved 0x80 bytes for rid 0x14 type 3 at 0xefdf7f80 xl0: using memory mapped I/O xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached xl0: Ethernet address: 00:00:39:9b:35:2d xl0: [GIANT-LOCKED] acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: failed to get data. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:00, syncbits:00 fdc0: cannot reserve I/O port range (1 ports) sio0: irq maps: 0x1 0x11 0x11 0x11 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: SPP ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) fdc0: cannot reserve I/O port range (1 ports) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xe8000-0xebfff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: cannot reserve I/O port range (6 ports) fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 597787460 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached ata1: spurious interrupt - status=0x00 error=0x01 acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip ad0: <TOSHIBA MK1214GAP/N0.15 G> ATA-4 disk at ata0-master ad0: 11513MB (23579136 sectors), 23392 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ar: FreeBSD check1 failed ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata1-master: setting PIO4 on Intel PIIX4 chip ata1-master: setting UDMA33 on Intel PIIX4 chip ad2: <TOSHIBA MK3017GAP/A0.10 H> ATA-5 disk at ata1-master ad2: 28615MB (58605120 sectors), 58140 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA33 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/4/63 s:63 l:23567292 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 12066453504 end 12066485759 GEOM: new disk ad2 ar: FreeBSD check1 failed Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. sym0: enabling clock multiplier sym0: Downloading SCSI SCRIPTS. [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:8401617 [1] f:00 typ:15 s(CHS):1023/255/63 e(CHS):1023/15/63 s:8401995 l:50203125 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s1, start 32256 length 4301627904 end 4301660159 GEOM: Configure ad2s2, start 4301821440 length 25704000000 end 30005821439 GEOM: Configure ad2s1a, start 0 length 268435456 end 268435455 GEOM: Configure ad2s1b, start 268435456 length 655187968 end 923623423 GEOM: Configure ad2s1c, start 0 length 4301627904 end 4301627903 GEOM: Configure ad2s1d, start 923623424 length 268435456 end 1192058879 GEOM: Configure ad2s1e, start 1192058880 length 268435456 end 1460494335 GEOM: Configure ad2s1f, start 1460494336 length 2841133568 end 4301627903 MBREXT Slice 5 on ad2s2: [0] f:00 typ:7 s(CHS):523/1/1 e(CHS):575/254/63 s:63 l:50203062 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s5, start 32256 length 25703967744 end 25703999999 Mounting root from ufs:/dev/ad2s1a start_init: trying /sbin/init splash: image decoder found: daemon_saver acpi_cmbat1: battery initialization failed, giving upReceived on Sun Apr 18 2004 - 17:05:48 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:51 UTC