Re: cvs commit: src/sys/dev/acpica acpi_pci_link.c acpi_pcib.c acpi_pcib_acpi.c acpi_pcib_pci.c acpi_pcibvar.h

Daniel Eriksson wrote:
> Nate Lawson wrote:
> 
> 
>>  Modified files:
>>    sys/dev/acpica       acpi_pci_link.c acpi_pcib.c 
>>                         acpi_pcib_acpi.c acpi_pcib_pci.c 
>>                         acpi_pcibvar.h 
>>  Log:
>>  Re-work ACPI PCI IRQ routing (_PRT, link devices).  The old 
>>approach was
>>  incomplete in that the PRT routing was not aware of link 
>>programming.
>>  Fix this by doing all routing through the link devices.  
> 
> 
> This(?) breaks interrupt routing pretty badly on ASUS A7V600-X (VIA KT-600
> chipset).
> 
> A kernel/userland from 2004.08.09.13.00.00 works just fine (sorry, no dmesg
> available right now), but a kernel/userland from 2004.08.11.15.00.00 breaks
> routing of interrupts to (at least) two HighPoint RocketRAID 454 cards.
> 
> Below is part of the dmesg from a boot with ACPI on. Does it matter that
> "PnP OS installed" is turned off in the BIOS? I will run some more tests
> later tonight and report the results here. This is just a FYI that something
> might be broken...

That may affect it.  Let me know.

> atapci0: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port
> 0xb400-0xb4ff,0xb800-0xb803,0xd000-0xd007,0xd400-0xd403,0xd800-0xd807 irq 11
> atapci1: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port
> 0x9800-0x98ff,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 irq 11
> ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x9400-0x94ff mem
> 0xed800000-0xed800fff irq 3 at device 12.0 on pci0
> atapci2: <HighPoint HPT374 (channel 0+1) UDMA133 controller> port
> 0x7800-0x78ff,0x8000-0x8003,0x8400-0x8407,0x8800-0x8803,0x9000-0x9007 irq 10
> atapci3: <HighPoint HPT374 (channel 2+3) UDMA133 controller> port
> 0x6000-0x60ff,0x6400-0x6403,0x6800-0x6807,0x7000-0x7003,0x7400-0x7407 irq 10
> at device 14.1 on pci0
> atapci4: <VIA 6420 SATA150 controller> port
> 0x4000-0x40ff,0x4400-0x440f,0x4800-0x4803,0x5000-0x5007,0x5400-0x5403,0x5800
> -0x5807 irq 5 at device 15.0 on pci0
> atapci5: <VIA 8237 UDMA133 controller> port
> 0x3800-0x380f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 14 at device 15.1 on
> pci0
> ata0: at 0x1f0 irq 14 on atapci5
> ata1: at 0x170 irq 15 on atapci5

I need the dmesg output from boot -v to see the link priority settings.

-- 
Nate