I just installed a Promise SATA150 TX4 in one of my servers. Everything seems to work, but I get an error message during boot that worries me a bit: atapci2: <Promise PDC20318 SATA150 controller> port 0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem 0xed000000-0xed01ffff,0xed800000-0xed800fff irq 19 at device 11.0 on pci0 atapci2: failed: rid 0x20 is memory, requested 4 atapci2: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xed000000 atapci2: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xed800000 This is with kernel/userland built from sources dated 2004.08.16.13.00.00 (earlier today). The machine has a bunch of PCI cards, and I'm worried that maybe some important resource allocation fails that later will come around and bite me. Hardware: ASUS A7V600-X motherboard (VIA KT-600 based) with latest BIOS (1005), Athlon XP2500+, 1.25GB DDR (onboard VIA 8237 UDMA133 controller) (onboard VIA 6420 SATA150 controller) (onboard VIA VT6102 Rhine II NIC) (onboard VIA 83C572 USB controller) Adaptec 29160 2 x Highpoint RocketRAID 454 Promise SATA150 TX4 Generic RealTek 8169-based NIC Attached is the output from "boot -v". /Daniel Eriksson
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:06 UTC