Randy Bush wrote: >>The actual errors from a 5.3-BETA from today (hand transcribed): > > > thanks for the transcription; i have tendonitis > > >>ad0: 73863MB <HTS548080M9AT00/MG40A50A> [150071/16/63] at ata0-master UDMA100 >>ATAPI_RESET time = 150us >>ata1-slave: FAILURE - ATAPI_IDENTIFY timed out >>ATAPI_RESET time = 150us >>acd0: CDRW <UJDA740 DVD/CDRW/1.04> at ata1-master UDMA33 >>Mounting root from ufs:/dev/ad0s2a >>[...] >>ad0: WARNING - READ_DME interupt was seen but timeout fired LBA=41574224 >>[...] >>ad0: WARNING - READ_DME interupt was seen but timeout fired LBA=41562160 >>ad0: WARNING - READ_DME interupt was seen but timeout fired LBA=41562160 >>ad0: WARNING - READ_DME interupt was seen but taskqueue stalled LBA=41562160 >>Slab at 0xc1c3ff70, freei 3 = 0 >> >>The "[...]" is just normal startup. It goes as far as the script that >>attaches my GDBE partition before it panics. >> >>And then it panics like below: > > > yep. same on a thinkpad t40p Since I have a few confirmations that backstepping just ATA doesnt help at all, I'm not convinced this is an ATA problem, at least not in the sense that changes to ATA broke it. -SørenReceived on Sun Aug 22 2004 - 10:28:06 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:07 UTC