Recently I came home from work and found my machine still as death. It was on but nothing was happening. It didn't take me too long to figure out what had happened. It has panic'd. The horrible irony is they I had JUST been convinced of the necessity of having a dump-device and a debugging kernel laying about (thanks to Michael Lucas). I had enabled the dump device for the next boot but not had time to build a kernel before work. Since I hadn't built the kernel I did not have an active dump device when this happened. Sadly, I am left wishing I could offer you more information but I will try and pull as much as I can. I am not a kernel programmer (not of any ability, yet, at least) but I suspect my NVIDIA drivers had something to do with this. As you can see from the following information, the program gleidescope appears to have initiated this collapse. Attached: panic.txt (the text of the panic message from the logs) dmesg.txt (the text of the dmesg dump from the logs) FOOKERN.old (my kernel configuration file for the kernel in question) make.conf (/etc/make.conf) uname.txt (uname -a) Following the advice of the FAQ I have done my best to narrow down the functions referred to in the panic. There are two. The output is the very specific location from gdb. <propagate_priority+126> = 0xc05450ae <turnstile_wait+378> = 0xc054567a Sorry I don't have more. I have enabled the dump device and am currently building a debugging kernel. With any luck I will be able to replicate the panic and provide better information. -Kevin -- "Down with disease, up before the dawn. A thousand barefoot children, dancin' on my lawn" -Phish "Down with Disease" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p9 #0: Tue Aug 3 19:13:31 EDT 2004 kevinb_at_fnord.quux.edu:/usr/src/sys/i386/compile/FOOKERN Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ce8000. Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0ce8244. Preloaded splash_image_data "/boot/splash.bmp" at 0xc0ce82f4. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0ce8344. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0ce83f0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ce849c. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (863.87-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268173312 (255 MB) avail memory = 246661120 (235 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL ZUUL > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f2d00 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 31 INTD is routed to irq 10 pcib0: slot 31 INTB is routed to irq 9 agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci2: <PCI bus> on pcib1 pcib0: slot 1 INTA is routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 nvidia0: <RIVA TNT2 Model 64/Model 64 Pro> mem 0xf2000000-0xf3ffffff,0xfd000000-0xfdffffff irq 11 at device 0.0 on pci2 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci1: <ACPI PCI bus> on pcib2 pcib2: slot 9 INTA is routed to irq 3 pcib2: slot 12 INTA is routed to irq 9 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfc9ff800-0xfc9ff87f irq 3 at device 9.0 on pci1 xl0: Ethernet address: 00:01:03:23:9d:ba miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcm0: <AudioPCI ES1371-B> port 0xdf00-0xdf3f irq 9 at device 12.0 on pci1 pcm0: <SigmaTel STAC9721/23 AC97 Codec> isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: <Hewlett-Packard OfficeJet Series 500.4.06b> MLC,PCL,PML plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 863866798 Hz quality 800 Timecounters tick every 10.000 msec GEOM: create disk ad0 dp=0xc31c3460 ad0: 28629MB <QUANTUM FIREBALLP LM30.0> [58168/16/63] at ata0-master UDMA66 GEOM: create disk ad1 dp=0xc31c3160 ad1: 57220MB <WDC WD600BB-75CAA0> [116257/16/63] at ata0-slave UDMA100 acd0: CDRW <LITE-ON LTR-16102B> at ata1-master PIO4 acd1: CDROM <SAMSUNG CD-ROM SC-148F> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted /var: mount pending error: blocks 4 files 0 WARNING: /drv1 was not properly dismounted NVRM: detected agp.ko, aborting NVIDIA AGP setup! NVRM: detected agp.ko, aborting NVIDIA AGP setup! pid 1034 (bouncingcow), uid 1000: exited on signal 8 (core dumped) pid 1420 (antspotlight), uid 1000: exited on signal 11 (core dumped) Aug 20 07:33:50 fnord syslogd: kernel boot file is /boot/kernel/kernel Aug 20 07:33:50 fnord kernel: pid 7702 (gleidescope), uid 1000: exited on signal 11 (core dumped) Aug 20 07:33:50 fnord kernel: TPTE at 0xbfca0168 IS ZERO _at_ VA 2805a000 Aug 20 07:33:50 fnord kernel: panic: bad pte Aug 20 07:33:50 fnord kernel: Aug 20 07:33:50 fnord kernel: syncing disks, buffers remaining... kernel trap 12 with interrupts disabled Aug 20 07:33:50 fnord kernel: Aug 20 07:33:50 fnord kernel: Aug 20 07:33:50 fnord kernel: Fatal trap 12: page fault while in kernel mode Aug 20 07:33:50 fnord kernel: fault virtual address = 0x24 Aug 20 07:33:50 fnord kernel: fault code = supervisor read, page not present Aug 20 07:33:50 fnord kernel: instruction pointer = 0x8:0xc05450ae Aug 20 07:33:50 fnord kernel: stack pointer = 0x10:0xcde47c24 Aug 20 07:33:50 fnord kernel: frame pointer = 0x10:0xcde47c48 Aug 20 07:33:50 fnord kernel: code segment = base 0x0, limit 0xfffff, type 0x1b Aug 20 07:33:50 fnord kernel: = DPL 0, pres 1, def32 1, gran 1 Aug 20 07:33:50 fnord kernel: processor eflags = resume, IOPL = 0 Aug 20 07:33:50 fnord kernel: current process = 28 (swi8: tty:sio clock) Aug 20 07:33:50 fnord kernel: trap number = 12 Aug 20 07:33:50 fnord kernel: panic: page fault Aug 20 07:33:50 fnord kernel: Uptime: 16h50m58s Aug 20 07:33:50 fnord kernel: Shutting down ACPI Aug 20 07:33:50 fnord kernel: kernel trap 12 with interrupts disabled Aug 20 07:33:50 fnord kernel: Aug 20 07:33:50 fnord kernel: Aug 20 07:33:50 fnord kernel: Fatal trap 12: page fault while in kernel mode Aug 20 07:33:50 fnord kernel: fault virtual address = 0x10 Aug 20 07:33:50 fnord kernel: fault code = supervisor write, page not present Aug 20 07:33:50 fnord kernel: instruction pointer = 0x8:0xc054567a Aug 20 07:33:50 fnord kernel: stack pointer = 0x10:0xcde478d8 Aug 20 07:33:50 fnord kernel: frame pointer = 0x10:0xcde478f8 Aug 20 07:33:50 fnord kernel: code segment = base 0x0, limit 0xfffff, type 0x1b Aug 20 07:33:50 fnord kernel: = DPL 0, pres 1, def32 1, gran 1 Aug 20 07:33:50 fnord kernel: processor eflags = resume, IOPL = 0 Aug 20 07:33:50 fnord kernel: current process = 28 (swi8: tty:sio clock) Aug 20 07:33:50 fnord kernel: trap number = 12 Aug 20 07:33:50 fnord kernel: panic: page fault Aug 20 07:33:50 fnord kernel: Uptime: 16h50m58s Aug 20 07:33:50 fnord kernel: Shutting down ACPI Aug 20 07:33:50 fnord kernel: Automatic reboot in 15 seconds - press a key on the console to abort Aug 20 07:33:50 fnord kernel: Rebooting... Aug 20 07:33:50 fnord kernel: Copyright (c) 1992-2004 The FreeBSD Project. Aug 20 07:33:50 fnord kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Aug 20 07:33:50 fnord kernel: The Regents of the University of California. All rights reserved. Aug 20 07:33:50 fnord kernel: FreeBSD 5.2.1-RELEASE-p9 #0: Tue Aug 3 19:13:31 EDT 2004 Aug 20 07:33:50 fnord kernel: kevinb_at_fnord.quux.edu:/usr/src/sys/i386/compile/FOOKERN Aug 20 07:33:50 fnord kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ce8000. Aug 20 07:33:50 fnord kernel: Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc0ce8244. Aug 20 07:33:50 fnord kernel: Preloaded splash_image_data "/boot/splash.bmp" at 0xc0ce82f4. Aug 20 07:33:50 fnord kernel: Preloaded elf module "/boot/kernel/linux.ko" at 0xc0ce8344. Aug 20 07:33:50 fnord kernel: Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0ce83f0. Aug 20 07:33:50 fnord kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ce849c. Aug 20 07:33:50 fnord kernel: Timecounter "i8254" frequency 1193182 Hz quality 0 Aug 20 07:33:50 fnord kernel: CPU: Intel Pentium III (863.87-MHz 686-class CPU) Aug 20 07:33:50 fnord kernel: Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Aug 20 07:33:50 fnord kernel: Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> Aug 20 07:33:50 fnord kernel: real memory = 268173312 (255 MB) Aug 20 07:33:50 fnord kernel: avail memory = 246661120 (235 MB) Aug 20 07:33:50 fnord kernel: Pentium Pro MTRR support enabled Aug 20 07:33:50 fnord kernel: npx0: [FAST] Aug 20 07:33:50 fnord kernel: npx0: <math processor> on motherboard Aug 20 07:33:50 fnord kernel: npx0: INT 16 interface Aug 20 07:33:50 fnord kernel: acpi0: <DELL ZUUL > on motherboard Aug 20 07:33:50 fnord kernel: pcibios: BIOS version 2.10 Aug 20 07:33:50 fnord kernel: Using $PIR table, 12 entries at 0xc00f2d00 Aug 20 07:33:50 fnord kernel: acpi0: Power Button (fixed) Aug 20 07:33:50 fnord kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Aug 20 07:33:50 fnord kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 Aug 20 07:33:50 fnord kernel: acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 Aug 20 07:33:50 fnord kernel: acpi_button0: <Sleep Button> on acpi0 Aug 20 07:33:50 fnord kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Aug 20 07:33:50 fnord kernel: pci0: <ACPI PCI bus> on pcib0 Aug 20 07:33:50 fnord kernel: pcib0: slot 31 INTD is routed to irq 10 Aug 20 07:33:50 fnord kernel: pcib0: slot 31 INTB is routed to irq 9 Aug 20 07:33:50 fnord kernel: agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 Aug 20 07:33:50 fnord kernel: pcib1: <PCI-PCI bridge> at device 1.0 on pci0 Aug 20 07:33:50 fnord kernel: pci2: <PCI bus> on pcib1 Aug 20 07:33:50 fnord kernel: pcib0: slot 1 INTA is routed to irq 11 Aug 20 07:33:50 fnord kernel: pcib1: slot 0 INTA is routed to irq 11 Aug 20 07:33:50 fnord kernel: nvidia0: <RIVA TNT2 Model 64/Model 64 Pro> mem 0xf2000000-0xf3ffffff,0xfd000000-0xfdffffff irq 11 at device 0.0 on pci2 Aug 20 07:33:50 fnord kernel: pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 Aug 20 07:33:50 fnord kernel: pci1: <ACPI PCI bus> on pcib2 Aug 20 07:33:50 fnord kernel: pcib2: slot 9 INTA is routed to irq 3 Aug 20 07:33:50 fnord kernel: pcib2: slot 12 INTA is routed to irq 9 Aug 20 07:33:50 fnord kernel: xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfc9ff800-0xfc9ff87f irq 3 at device 9.0 on pci1 Aug 20 07:33:50 fnord kernel: xl0: Ethernet address: 00:01:03:23:9d:ba Aug 20 07:33:50 fnord kernel: miibus0: <MII bus> on xl0 Aug 20 07:33:50 fnord kernel: xlphy0: <3c905C 10/100 internal PHY> on miibus0 Aug 20 07:33:50 fnord kernel: xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Aug 20 07:33:50 fnord kernel: pcm0: <AudioPCI ES1371-B> port 0xdf00-0xdf3f irq 9 at device 12.0 on pci1 Aug 20 07:33:50 fnord kernel: pcm0: <SigmaTel STAC9721/23 AC97 Codec> Aug 20 07:33:50 fnord kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0 Aug 20 07:33:50 fnord kernel: isa0: <ISA bus> on isab0 Aug 20 07:33:50 fnord kernel: atapci0: <Intel ICH2 UDMA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0 Aug 20 07:33:50 fnord kernel: ata0: at 0x1f0 irq 14 on atapci0 Aug 20 07:33:50 fnord kernel: ata0: [MPSAFE] Aug 20 07:33:50 fnord kernel: ata1: at 0x170 irq 15 on atapci0 Aug 20 07:33:50 fnord kernel: ata1: [MPSAFE] Aug 20 07:33:50 fnord kernel: uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef80-0xef9f irq 10 at device 31.2 on pci0 Aug 20 07:33:50 fnord kernel: usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 Aug 20 07:33:50 fnord kernel: usb0: USB revision 1.0 Aug 20 07:33:50 fnord kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Aug 20 07:33:50 fnord kernel: uhub0: 2 ports with 2 removable, self powered Aug 20 07:33:50 fnord kernel: ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 Aug 20 07:33:50 fnord kernel: ums0: 3 buttons and Z dir. Aug 20 07:33:50 fnord kernel: pci0: <serial bus, SMBus> at device 31.3 (no driver attached) Aug 20 07:33:50 fnord kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 Aug 20 07:33:50 fnord kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Aug 20 07:33:50 fnord kernel: kbd0 at atkbd0 Aug 20 07:33:50 fnord kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 Aug 20 07:33:50 fnord kernel: fdc0: FIFO enabled, 8 bytes threshold Aug 20 07:33:50 fnord kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Aug 20 07:33:50 fnord kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0 Aug 20 07:33:50 fnord kernel: sio0: type 16550A Aug 20 07:33:50 fnord kernel: ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 Aug 20 07:33:50 fnord kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode Aug 20 07:33:50 fnord kernel: ppc0: FIFO with 16/16/8 bytes threshold Aug 20 07:33:50 fnord kernel: ppbus0: <Parallel port bus> on ppc0 Aug 20 07:33:50 fnord kernel: ppbus0: IEEE1284 device found /NIBBLE/ECP Aug 20 07:33:50 fnord kernel: Probing for PnP devices on ppbus0: Aug 20 07:33:50 fnord kernel: ppbus0: <Hewlett-Packard OfficeJet Series 500.4.06b> MLC,PCL,PML Aug 20 07:33:50 fnord kernel: plip0: <PLIP network interface> on ppbus0 Aug 20 07:33:50 fnord kernel: lpt0: <Printer> on ppbus0 Aug 20 07:33:50 fnord kernel: lpt0: Interrupt-driven port Aug 20 07:33:50 fnord kernel: ppi0: <Parallel I/O> on ppbus0 Aug 20 07:33:50 fnord kernel: pmtimer0 on isa0 Aug 20 07:33:50 fnord kernel: sc0: <System console> at flags 0x100 on isa0 Aug 20 07:33:50 fnord kernel: sc0: VGA <16 virtual consoles, flags=0x300> Aug 20 07:33:50 fnord kernel: sio1: configured irq 3 not in bitmap of probed irqs 0 Aug 20 07:33:50 fnord kernel: sio1: port may not be enabled Aug 20 07:33:50 fnord kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Aug 20 07:33:50 fnord kernel: Timecounter "TSC" frequency 863866968 Hz quality 800 Aug 20 07:33:50 fnord kernel: Timecounters tick every 10.000 msec Aug 20 07:33:50 fnord kernel: GEOM: create disk ad0 dp=0xc31c3460 Aug 20 07:33:50 fnord kernel: ad0: 28629MB <QUANTUM FIREBALLP LM30.0> [58168/16/63] at ata0-master UDMA66 Aug 20 07:33:50 fnord kernel: GEOM: create disk ad1 dp=0xc31c3160 Aug 20 07:33:50 fnord kernel: ad1: 57220MB <WDC WD600BB-75CAA0> [116257/16/63] at ata0-slave UDMA100 Aug 20 07:33:50 fnord kernel: acd0: CDRW <LITE-ON LTR-16102B> at ata1-master PIO4 Aug 20 07:33:50 fnord kernel: acd1: CDROM <SAMSUNG CD-ROM SC-148F> at ata1-slave PIO4 Aug 20 07:33:50 fnord kernel: Mounting root from ufs:/dev/ad0s1a Aug 20 07:33:50 fnord kernel: WARNING: / was not properly dismounted Aug 20 07:33:50 fnord kernel: WARNING: /tmp was not properly dismounted Aug 20 07:33:50 fnord kernel: WARNING: /usr was not properly dismounted Aug 20 07:33:50 fnord kernel: WARNING: /var was not properly dismounted Aug 20 07:33:50 fnord kernel: WARNING: /drv1 was not properly dismounted # -- use.perl generated deltas -- # # Created: Wed Jun 9 22:17:55 2004 # Setting to use base perl from ports: PERL_VER=5.6.1 PERL_VERSION=5.6.1 PERL_ARCH=mach NOPERL=yo NO_PERL=yo NO_PERL_WRAPPER=yo CPUTYPE=p3 X_WINDOW_SYSTEM=xorg FreeBSD fnord.quux.edu 5.2.1-RELEASE-p9 FreeBSD 5.2.1-RELEASE-p9 #0: Tue Aug 3 19:13:31 EDT 2004 kevinb_at_fnord.quux.edu:/usr/src/sys/i386/compile/FOOKERN i386Received on Sun Aug 22 2004 - 00:18:27 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:07 UTC