Søren Schmidt wrote: > Oliver B. Fischer wrote: > >> Brian Buchanan wrote: >> >>> S�ren, >>> >>> It looks like the changes you made to ATA IRQ handling in the last few >>> days broke ATA support on my laptop, an IBM Thinkpad T40p. >>> >>> atapci0: <Intel ICH4 UDMA100 controller> port >>> 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 >>> >>> atapci0_at_pci0:31:1: class=0x01018a card=0x052d1014 chip=0x24ca8086 >>> rev=0x01 hdr=0x00 >>> vendor = 'Intel Corporation' >>> device = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller' >>> class = mass storage >>> subclass = ATA >> I can confirm this for my R51, which have the same controller as >> Brians one. > > > This is *not* a controller problem, its because the CDROM drive has > buggy firmware that responds to both master and slave selection :( OK, I have committed a workaround for those buggers to -current... (for those that uses 5.3 just take your ATA driver upto -current) -SørenReceived on Sun Aug 22 2004 - 13:59:21 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:07 UTC