Re: Cannot install onto mpt-driven drive

From: Doug White <dwhite_at_gumbysoft.com>
Date: Sun, 22 Aug 2004 16:18:58 -0700 (PDT)
On Sun, 22 Aug 2004, Joe Marcus Clarke wrote:

> > > > > I just got a new Dell Precision 360 workstation with an LSILogic SCSI
> > > > > controller:
> > > > >
> > > > > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xcd00-0xcdff mem
> > > > > 0xfe780000-0xfe79ffff,0xfe760000-0xfe77ffff irq 10 at device 3.0 on pci2
> > > > > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xce00-0xceff mem
> > > > > 0xfe7x0000-0xfe7dffff,0xfe7a0000-0xfe7bffff irq 9 at device 3.1 on pci2

Hm .. I have a PowerEdge 1750 here, which has the same controller, but it
installed 5.2.1R fine:

mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xbc00-0xbcff mem
0xfcb20000-0xfcb2ffff,0xfcb30000-0xfcb3ffff irq 18 at device 5.0 on pci4
mpt0: [GIANT-LOCKED]
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xb800-0xb8ff mem
0xfcb00000-0xfcb0ffff,0xfcb10000-0xfcb1ffff irq 19 at device 5.1 on pci4
mpt1: [GIANT-LOCKED]

pciconf -lv info:

mpt0_at_pci4:5:0:  class=0x010000 card=0x014a1028 chip=0x00301000 rev=0x07
hdr=0x00
    vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
    device   = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
    class    = mass storage
    subclass = SCSI


> No, the problem was definitely the bug I mentioned in my follow-up.  I
> have a custom 5.2.1-RELEASE ISO that will work just fine.  If you decide
> to upgrade beyond 5.2.1-RELEASE, you will also need to re-patch the
> mpt(4) driver.  I'm currently running 5.3-BETA, and it works just fine.
>
> http://www.marcuscom.com/downloads/5.2.1-RELEASE-i386-miniinst.iso
> http://www.marcuscom.com/downloads/mpt.diff

I'll do a build pass with this patch to make sure there's no regression on
my machine.

-- 
Doug White                    |  FreeBSD: The Power to Serve
dwhite_at_gumbysoft.com          |  www.FreeBSD.org
Received on Sun Aug 22 2004 - 21:18:59 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:07 UTC