Re: Cannot install onto mpt-driven drive

On Sun, 2004-08-22 at 19:18, Doug White wrote:
> On Sun, 22 Aug 2004, Joe Marcus Clarke wrote:
> 
> > > > > > I just got a new Dell Precision 360 workstation with an LSILogic SCSI
> > > > > > controller:
> > > > > >
> > > > > > mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xcd00-0xcdff mem
> > > > > > 0xfe780000-0xfe79ffff,0xfe760000-0xfe77ffff irq 10 at device 3.0 on pci2
> > > > > > mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xce00-0xceff mem
> > > > > > 0xfe7x0000-0xfe7dffff,0xfe7a0000-0xfe7bffff irq 9 at device 3.1 on pci2
> 
> Hm .. I have a PowerEdge 1750 here, which has the same controller, but it
> installed 5.2.1R fine:
> 
> mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xbc00-0xbcff mem
> 0xfcb20000-0xfcb2ffff,0xfcb30000-0xfcb3ffff irq 18 at device 5.0 on pci4
> mpt0: [GIANT-LOCKED]
> mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xb800-0xb8ff mem
> 0xfcb00000-0xfcb0ffff,0xfcb10000-0xfcb1ffff irq 19 at device 5.1 on pci4
> mpt1: [GIANT-LOCKED]
> 
> pciconf -lv info:
> 
> mpt0_at_pci4:5:0:  class=0x010000 card=0x014a1028 chip=0x00301000 rev=0x07
> hdr=0x00
>     vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
>     device   = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
>     class    = mass storage
>     subclass = SCSI

There is a subtle difference in the card:

mpt1_at_pci2:3:1:  class=0x010000 card=0x10401028 chip=0x00301000 rev=0x07 hdr=0x00    
    vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
    device   = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
    class    = mass storage
    subclass = SCSI

I have a PE server as well that has another slightly different card:

mpt0_at_pci1:4:0:  class=0x010000 card=0x01351028 chip=0x00301000 rev=0x07 hdr=0x00    
    vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
    device   = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller'
    class    = mass storage
    subclass = SCSI

This works fine as well.

> 
> 
> > No, the problem was definitely the bug I mentioned in my follow-up.  I
> > have a custom 5.2.1-RELEASE ISO that will work just fine.  If you decide
> > to upgrade beyond 5.2.1-RELEASE, you will also need to re-patch the
> > mpt(4) driver.  I'm currently running 5.3-BETA, and it works just fine.
> >
> > http://www.marcuscom.com/downloads/5.2.1-RELEASE-i386-miniinst.iso
> > http://www.marcuscom.com/downloads/mpt.diff
> 
> I'll do a build pass with this patch to make sure there's no regression on
> my machine.

Thanks.

Joe

-- 
PGP Key : http://www.marcuscom.com/pgp.asc