On Mon, Aug 23, 2004 at 02:09:43PM -0400, Robert Huff wrote: > > I updated to > > FreeBSD 6.0-CURRENT #1: Fri Aug 20 15:02:58 EDT 2004 > > and noticed in the boot messages: > > witness_get: witness exhausted > > What's going on, and is this something I need to worry about? > (System config file and dmesg output are appended.) > > > Robert Huff "Me too". This is on FreeBSD 5.3-BETA1 #0: Sun Aug 22 09:50:24 CEST 2004 It appears just after IPsec inited. The message comes from sys/kern/subr_witness.c (rev 1.178) -- dmesg -- Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA1 #0: Sun Aug 22 09:50:24 CEST 2004 root_at_82-168-140-74-bbxl.xdsl.tiscali.nl:/usr/obj/usr/src-releng_5/sys/RENE_2004-08-22d WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Celeron (497.56-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 201261056 (191 MB) avail memory = 187260928 (178 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <FUJ IRIS> on motherboard acpi0: Power Button (fixed) acpi_ec0: <Embedded Controller: GPE 0x9> port 0x66,0x62 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <bridge, PCI-CardBus> at device 4.0 (no driver attached) pci0: <bridge, PCI-CardBus> at device 4.1 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1080-0x108f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x10a0-0x10bf irq 9 at device 7.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> port 0xff80-0xff8f irq 9 at device 7.3 on pci0 intpm0: I/O mapped ff80 intpm0: intr IRQ 9 enabled revision 0 intpm0: [GIANT-LOCKED] intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus generic I/O> on smbus0 intpm0: PM I/O mapped 1000 pcm0: <Crystal Semiconductor CS4281> mem 0xfc110000-0xfc11ffff,0xfc101000-0xfc101fff irq 5 at device 8.0 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Cirrus Logic CS4297A AC97 Codec> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x1040-0x107f mem 0xfc000000-0xfc0fffff,0xfc100000-0xfc100fff irq 9 at device 16.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:d0:59:01:ed:22 fxp0: [GIANT-LOCKED] speaker0 port 0x61 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x3 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> flags 0x2040 irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0 at vga0 Timecounter "TSC" frequency 497559460 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. witness_get: witness exhausted acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: 5729MB <FUJITSU MHK2060AT/D837> [12416/15/63] at ata0-master UDMA33 ATAPI_RESET time = 350us acd0: CDROM <CD-224E/1.7A> at ata1-master UDMA33 Mounting root from ufs:/dev/ad0s1a -- config -- makeoptions DEBUG=-g machine i386 cpu I686_CPU options CPU_FASTER_5X86_FPU ident RENE_2004-08-22d device apic options SCHED_ULE options KDB options DDB options GDB options WITNESS options WITNESS_KDB options INVARIANTS options INVARIANT_SUPPORT options AHC_REG_PRETTY_PRINT options AHD_REG_PRETTY_PRINT options ADAPTIVE_GIANT options GEOM_GPT options INET options INET6 options IPSEC options IPSEC_ESP options FFS options SOFTUPDATES options UFS_ACL options UFS_DIRHASH options COMPAT_FREEBSD4 options COMPAT_43 options KTRACE options PQ_CACHESIZE=32 options _KPOSIX_PRIORITY_SCHEDULING device isa device pci device ata device atadisk device atapicd device atkbdc device atkbd options KBD_INSTALL_CDEV device psm device sc options SC_TWOBUTTON_MOUSE device vga options FB_INSTALL_CDEV device npx options DEVICE_POLLING options HZ=1000 device loop device ether device pty device bpf options XBONEHACK options PPP_BSDCOMP options PPP_DEFLATE options PPP_FILTER device splash device pmtimer -- modules (bioschar is a toy module of me) -- verbose_loading="YES" mem_load="YES" io_load="YES" random_load="YES" usb_load="YES" fdc_load="YES" msdosfs_iconv_load="YES" cd9660_iconv_load="YES" agp_load="YES" vesa_load="YES" green_saver_load="YES" if_tun_load="YES" if_faith_load="YES" if_gif_load="YES" if_gre_load="YES" if_stf_load="YES" miibus_load="YES" if_fxp_load="YES" sound_load="YES" snd_cs4281_load="YES" speaker_load="YES" linux_load="YES" bioschar_load="YES" ng_ether_load="YES" ng_gif_load="YES" ng_gif_demux_load="YES" ng_tty_load="YES" aout_load="YES" smb_load="YES" intpm_load="YES"
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:08 UTC