APIC causes vr0 watchdog timeouts and Interrupt storms

From: Justin Settle <quaggamail_at_quaggaspace.org>
Date: Sun, 29 Aug 2004 00:49:17 -0400
Hello,

I recently installed 5.3-BETA.  After booting, I found was unable to use
my usb mouse or my ethernet (Via-rhine).  I started tinkering with the
kernel and found that if I disabled APIC, this system worked without
ethernet issues or mouse isssues.  After talking with some people they
suggested I post boot -v, dmesg's of the different kernels so here they
are: 

The first thing I tried was a GENERIC with SMP commented out.  It had
the same issues as GENERIC:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Sat Aug 28 23:18:57 EDT 2004
    root_at_amon.quaggaspace.org:/usr/obj/usr/src/sys/GENERICNOSMP
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ad1000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ad121c.
Table 'FACP' at 0x2fff3040
Table 'APIC' at 0x2fff6e00
MADT: Found table at 0x2fff6e00
MP Configuration Table version 1.4 found at 0xc00f1400
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <KT400  AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193135 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1467296595 Hz
CPU: AMD Athlon(tm) XP 1700+ (1467.30-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x680  Stepping = 0
 
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way
associative
real memory  = 805240832 (767 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000002f23ffff, 778149888 bytes (189978 pages)
avail memory = 778231808 (742 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb040
bios32: Entry = 0xfb4b0 (c00fb4b0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4e0
pnpbios: Found PnP BIOS data at 0xc00fbfb0
pnpbios: Entry = f0000:bfe0  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <KT400 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=31891106)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fdea0
PCI-Only Interrupts: 5 10 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 6      0   13    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      0   13    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 6      0   13    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 6      0   13    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    D   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   18    A   0x01  3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.0
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.1
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.2
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.3
\\_SB_.PCI0.ALKA irq  0: [20]  0+ low,level,sharable 0.17.0
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.17.1
\\_SB_.PCI0.ALKC irq  0: [22]  0+ low,level,sharable 0.17.2
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.17.3
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.0
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.1
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.2
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e8000000, size 26, enabled
found->	vendor=0x1106, dev=0x3189, revid=0x00
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0xb168, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000d000, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.ALKB)
pcib0: possible interrupts: 21
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ALKB (references 5, priority 250):
	interrupts:	    21
	penalty:	    50
\\_SB_.PCI0.ALKD (references 5, priority 250):
	interrupts:	    23
	penalty:	    50
\\_SB_.PCI0.ALKA (references 1, priority 10):
	interrupts:	    20
	penalty:	    10
\\_SB_.PCI0.ALKC (references 1, priority 10):
	interrupts:	    22
	penalty:	    10
acpi link set: _CRS failed for link \\_SB_.PCI0.ALKB - AE_NULL_ENTRY
acpi link set: curr irq 0 != 21 for \\_SB_.PCI0.ALKB (ignoring)
unknown: _SRS failed, irq 21 via \\_SB_.PCI0.ALKB
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000d400, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.ALKB)
pcib0: slot 16 INTB is already routed to irq 21
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=21
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000d800, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.ALKB)
pcib0: slot 16 INTC is already routed to irq 21
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=21
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee000000, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \\_SB_.PCI0.ALKB)
pcib0: slot 16 INTD is already routed to irq 21
found->	vendor=0x1106, dev=0x3104, revid=0x82
	bus=0, slot=16, func=3
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=21
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1106, dev=0x3177, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000dc00, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=17, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e000, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.ALKC)
pcib0: possible interrupts: 22
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ALKD (references 5, priority 500):
	interrupts:	    23
	penalty:	   100
\\_SB_.PCI0.ALKA (references 1, priority 20):
	interrupts:	    20
	penalty:	    20
\\_SB_.PCI0.ALKC (references 1, priority 20):
	interrupts:	    22
	penalty:	    20
acpi link set: _CRS failed for link \\_SB_.PCI0.ALKC - AE_NULL_ENTRY
acpi link set: curr irq 0 != 22 for \\_SB_.PCI0.ALKC (ignoring)
unknown: _SRS failed, irq 22 via \\_SB_.PCI0.ALKC
found->	vendor=0x1106, dev=0x3059, revid=0x50
	bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000e400, size  8, enabled
	map[14]: type 1, range 32, base ee001000, size  8, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.ALKD)
pcib0: possible interrupts: 23
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ALKD (references 5, priority 750):
	interrupts:	    23
	penalty:	   150
\\_SB_.PCI0.ALKA (references 1, priority 30):
	interrupts:	    20
	penalty:	    30
acpi link set: _CRS failed for link \\_SB_.PCI0.ALKD - AE_NULL_ENTRY
acpi link set: curr irq 0 != 23 for \\_SB_.PCI0.ALKD (ignoring)
unknown: _SRS failed, irq 23 via \\_SB_.PCI0.ALKD
found->	vendor=0x1106, dev=0x3065, revid=0x74
	bus=0, slot=18, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem
0xe8000000-0xebffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: allocating GATT for aperture of size 240M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xec000000-0xedffffff
pcib1:   prefetched decode 0xe0000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base ec000000, size 24, enabled
pcib1: device (null) requested decoded memory range
0xec000000-0xecffffff
	map[14]: type 3, range 32, base e0000000, size 27, enabled
pcib1: device (null) requested decoded memory range
0xe0000000-0xe7ffffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found->	vendor=0x10de, dev=0x0281, revid=0xa1
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 11 at device
16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 2, iclass
3/1
ums0: 4 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 21 at device
16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 21 at device
16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port
0xdc00-0xdc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdc00
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe400-0xe4ff mem
0xee001000-0xee0010ff irq 11 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 5
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:50:8d:46:5a:1f
vr0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on
acpi0
sio0: irq maps: 0xd001 0xd011 0xd001 0xd001
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0xd001 0xd009 0xd001 0xd001
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard LaserJet 4L> HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1467296595 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA100 on VIA 8235 chip
ad0: <IC35L060AVV207-0/V22OA66A> ATA-6 disk at ata0-master
ad0: 38146MB (78125000 sectors), 77504 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 10us
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 10us
ata1-master: setting PIO4 on VIA 8235 chip
ata1-master: setting UDMA33 on VIA 8235 chip
ata1-slave: setting PIO4 on VIA 8235 chip
ata1-slave: setting UDMA33 on VIA 8235 chip
acd0: <_NEC DVD_RW ND-2510A/2.15> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 5512KB/s (5512KB/s), 2048KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <LITE-ON COMBO LTC-48161H/KH0M> CDRW drive at ata1 as slave
acd1:  2048KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:54524547
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 27916568064 end 27916600319
GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s1b, start 134217728 length 1594351616 end 1728569343
GEOM: Configure ad0s1c, start 0 length 27916568064 end 27916568063
GEOM: Configure ad0s1d, start 14076600320 length 13839967744 end
27916568063
GEOM: Configure ad0s1e, start 1728569344 length 268435456 end 1997004799
GEOM: Configure ad0s1f, start 1997004800 length 268435456 end 2265440255
GEOM: Configure ad0s1g, start 2265440256 length 10737418240 end
13002858495
GEOM: Configure ad0s1h, start 13002858496 length 1073741824 end
14076600319
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Interrupt storm detected on "irq21: uhci1 uhci2"; throttling interrupt
source
vr0: watchdog timeout
usbd_setup_pipe: failed to start endpoint, TIMEOUT
Linux ELF exec handler installed

***************
As you can see, the interupt storm and vr0 timeouts at the end. USB
mouse was unresponsive and vr0 timed out whenever I did anything. I then
compiled without SMP or device APIC.  This kernel seemingly works fine
for me:
***************

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #0: Sun Aug 29 00:02:49 EDT 2004
    root_at_amon.quaggaspace.org:/usr/obj/usr/src/sys/GENERICNOAPIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0acb000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0acb21c.
Calibrating clock(s) ... i8254 clock: 1193134 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1467292412 Hz
CPU: AMD Athlon(tm) XP 1700+ (1467.29-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x680  Stepping = 0
 
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way
associative
real memory  = 805240832 (767 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000002f23ffff, 778149888 bytes (189978 pages)
avail memory = 778231808 (742 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb040
bios32: Entry = 0xfb4b0 (c00fb4b0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb4e0
pnpbios: Found PnP BIOS data at 0xc00fbfb0
pnpbios: Entry = f0000:bfe0  Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <KT400 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=31891106)
pcibios: BIOS version 2.10
Found $PIR table, 11 entries at 0xc00fdea0
PCI-Only Interrupts: 5 10 11 12
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 6      0   13    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      0   13    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 6      0   13    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 6      0   13    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 7      0   19    D   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   18    A   0x01  3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.8.0
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.8.1
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.8.2
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.8.3
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.9.0
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.9.1
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.9.2
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.9.3
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.10.0
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.10.1
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.10.2
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.10.3
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.11.0
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.11.1
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.11.2
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.11.3
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.12.0
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.12.1
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.12.2
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.12.3
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.13.0
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.13.1
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.13.2
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.13.3
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.19.0
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.19.1
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.19.2
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.19.3
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.16.0
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.16.1
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.16.2
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.16.3
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.17.0
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.17.1
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.17.2
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.17.3
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.1.0
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.1.1
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.1.2
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.1.3
\\_SB_.PCI0.LNKA irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 11+
low,level,sharable 0.18.0
\\_SB_.PCI0.LNKB irq  0: [ 1  3  4  5  6  7 10 11 12 14 15]  5+
low,level,sharable 0.18.1
\\_SB_.PCI0.LNKC irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 10+
low,level,sharable 0.18.2
\\_SB_.PCI0.LNKD irq  0: [ 1  3  4  5  6  7 10 11 12 14 15] 12+
low,level,sharable 0.18.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e8000000, size 26, enabled
found->	vendor=0x1106, dev=0x3189, revid=0x00
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0xb168, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 0000d000, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 11, priority 229890):
	interrupts:	    11    10     5    12     7     6     4     3    15   
14     1
	penalty:	   440   440   490  5440  5440  5440  5440  5440 50440
50440100440
\\_SB_.PCI0.LNKB (references 11, priority 229890):
	interrupts:	    11    10     5    12     7     6     4     3    15   
14     1
	penalty:	   440   440   490  5440  5440  5440  5440  5440 50440
50440100440
\\_SB_.PCI0.LNKC (references 11, priority 229890):
	interrupts:	    11    10     5    12     7     6     4     3    15   
14     1
	penalty:	   440   440   490  5440  5440  5440  5440  5440 50440
50440100440
\\_SB_.PCI0.LNKD (references 11, priority 229890):
	interrupts:	    11    10     5    12     7     6     4     3    15   
14     1
	penalty:	   440   440   490  5440  5440  5440  5440  5440 50440
50440100440
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000d400, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LNKB)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKB (references 11, priority 234840):
	interrupts:	    10     5    11    12     7     6     4     3    15   
14     1
	penalty:	   880   930   990  5880  5880  5880  5880  5880 50880
50880100880
\\_SB_.PCI0.LNKC (references 11, priority 234840):
	interrupts:	    10     5    11    12     7     6     4     3    15   
14     1
	penalty:	   880   930   990  5880  5880  5880  5880  5880 50880
50880100880
\\_SB_.PCI0.LNKD (references 11, priority 234840):
	interrupts:	    10     5    11    12     7     6     4     3    15   
14     1
	penalty:	   880   930   990  5880  5880  5880  5880  5880 50880
50880100880
pcib0: slot 16 INTB routed to irq 5 via \\_SB_.PCI0.LNKB
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000d800, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.LNKC)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKC (references 11, priority 239790):
	interrupts:	    10    11     5    12     7     6     4     3    15   
14     1
	penalty:	  1320  1430  1480  6320  6320  6320  6320  6320 51320
51320101320
\\_SB_.PCI0.LNKD (references 11, priority 239790):
	interrupts:	    10    11     5    12     7     6     4     3    15   
14     1
	penalty:	  1320  1430  1480  6320  6320  6320  6320  6320 51320
51320101320
pcib0: slot 16 INTC routed to irq 10 via \\_SB_.PCI0.LNKC
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base ee000000, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKD (references 11, priority 244740):
	interrupts:	    11    10     5    12     7     6     4     3    15   
14     1
	penalty:	  1870  1870  1920  6760  6760  6760  6760  6760 51760
51760101760
pcib0: slot 16 INTD routed to irq 12 via \\_SB_.PCI0.LNKD
found->	vendor=0x1106, dev=0x3104, revid=0x82
	bus=0, slot=16, func=3
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=12
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1106, dev=0x3177, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000dc00, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=17, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000e000, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.LNKC)
pcib0: slot 17 INTC is already routed to irq 10
found->	vendor=0x1106, dev=0x3059, revid=0x50
	bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000e400, size  8, enabled
	map[14]: type 1, range 32, base ee001000, size  8, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 18 INTA is already routed to irq 11
found->	vendor=0x1106, dev=0x3065, revid=0x74
	bus=0, slot=18, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem
0xe8000000-0xebffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: allocating GATT for aperture of size 240M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xec000000-0xedffffff
pcib1:   prefetched decode 0xe0000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 1, range 32, base ec000000, size 24, enabled
pcib1: device (null) requested decoded memory range
0xec000000-0xecffffff
	map[14]: type 3, range 32, base e0000000, size 27, enabled
pcib1: device (null) requested decoded memory range
0xe0000000-0xe7ffffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 1 INTA is already routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x10de, dev=0x0281, revid=0xa1
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 11 at device
16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 2, iclass
3/1
ums0: 4 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 5 at device
16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device
16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port
0xdc00-0xdc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdc00
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe400-0xe4ff mem
0xee001000-0xee0010ff irq 11 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 5
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:50:8d:46:5a:1f
vr0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on
acpi0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard LaserJet 4L> HP ENHANCED PCL5,PJL
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 13: ioport 0xdc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1467292412 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA100 on VIA 8235 chip
ad0: <IC35L060AVV207-0/V22OA66A> ATA-6 disk at ata0-master
ad0: 38146MB (78125000 sectors), 77504 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 10us
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ATAPI_RESET time = 20us
ata1-master: setting PIO4 on VIA 8235 chip
ata1-master: setting UDMA33 on VIA 8235 chip
ata1-slave: setting PIO4 on VIA 8235 chip
ata1-slave: setting UDMA33 on VIA 8235 chip
acd0: <_NEC DVD_RW ND-2510A/2.15> DVDR drive at ata1 as master
acd0: read 6890KB/s (6890KB/s) write 5512KB/s (5512KB/s), 2048KB buffer,
UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <LITE-ON COMBO LTC-48161H/KH0M> CDRW drive at ata1 as slave
acd1:  2048KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd1: Writes: CDR, CDRW, test write, burnproof
acd1: Audio: play, 255 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:54524547
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 27916568064 end 27916600319
GEOM: Configure ad0s1a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s1b, start 134217728 length 1594351616 end 1728569343
GEOM: Configure ad0s1c, start 0 length 27916568064 end 27916568063
GEOM: Configure ad0s1d, start 14076600320 length 13839967744 end
27916568063
GEOM: Configure ad0s1e, start 1728569344 length 268435456 end 1997004799
GEOM: Configure ad0s1f, start 1997004800 length 268435456 end 2265440255
GEOM: Configure ad0s1g, start 2265440256 length 10737418240 end
13002858495
GEOM: Configure ad0s1h, start 13002858496 length 1073741824 end
14076600319
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed


ACPI is on both of these kernels but I've tried both without and the
results are the same.  Should any other information be needed/wanted
I'll be sure to reply.  Thank you for your time.

Jay Settle
Received on Sun Aug 29 2004 - 02:48:59 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:09 UTC