Re: 5.2.1 RC1 audio no more trouble

From: Mattias Schlenker <mattias_at_schlenker-webdesign.de>
Date: Wed, 04 Feb 2004 14:13:34 +0100
Gavin Atkinson wrote:

>On Wed, 4 Feb 2004, Mattias Schlenker wrote:
>
>  
>
>>I still use an old Fujitsu Lifebook B142 which has an ESS ES1946S sound
>>chip. In 4.7 and 5.1 sound worked without any problems after putting
>>
>>snd_pcm_load="YES"
>>    
>>

Sorry, I used snd_ess_load="YES" which worked in 4.7 and 5.1. I should 
use copy and paste instead of trying to remember config files.

>What is the output of "pciconf -l"?
>

hostb0_at_pci0:0:0:        class=0x060000 card=0x107f10cf chip=0x71948086 
rev=0x01 hdr=0x00
isab0_at_pci0:7:0: class=0x068000 card=0x00000000 chip=0x71988086 rev=0x01 
hdr=0x00
atapci0_at_pci0:7:1:       class=0x010180 card=0x00000000 chip=0x71998086 
rev=0x00 hdr=0x00
uhci0_at_pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x719a8086 rev=0x00 
hdr=0x00
none0_at_pci0:7:3: class=0x068000 card=0x00000000 chip=0x719b8086 rev=0x00 
hdr=0x00
none1_at_pci0:13:0:        class=0x040100 card=0x108210cf chip=0x1969125d 
rev=0x02 hdr=0x00
none2_at_pci0:16:0:        class=0x078000 card=0x107210cf chip=0x044a11c1 
rev=0x01 hdr=0x00
cbb0_at_pci0:19:0: class=0x060700 card=0x105a10cf chip=0x04751180 rev=0x00 
hdr=0x02
none3_at_pci0:20:0:        class=0x030000 card=0x102910cf chip=0x000410c8 
rev=0x01 hdr=0x00


>And what happens if you "kldload
>snd_driver" once booted?
>  
>

I hear something...

pcm0: <ESS Solo-1 (unknown vendor)> port 
0xf4ec-0xf4ef,0xf4e8-0xf4eb,0xf4b0-0xf4bf,0xf4a0-0xf4af,0xf440-0xf47f 
irq 9 at device 13.0 on pci0

When using kldload snd_driver a few weeks ago on CURRENT, I ran into a 
kernel panic, so I did not try it again.

>Generally snd_pcm is simply the "support code", and you also need to load
>a chipset specific driver too. snd_driver is a meta-module which simply
>forces a load of all of the chipset-specific modules.
>
>Once you know which chipset specific driver you need to use, add (eg)
>snd_ich_load="YES" to your loader.conf instead or as well as the pcm line. 
>  
>

   snd_ess_load="YES"

still does not work, but

   snd_solo_load="YES"

does work. When did the support code for the ESS Solo move to the module 
,,solo''? Was it just luck, that this sound card worked with the ESS driver?

Thanks,
Mattias




-- 
 Mattias Schlenker  / Tel 0851 9441369 oder 0160 7352988
 Freyunger Str. 42 / http://ilw.schlenker-webdesign.de/
 94034 Passau     / http://mattlog.schlenker-webdesign.de/
Received on Wed Feb 04 2004 - 04:13:46 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:41 UTC