So I'm updating from a Dec 5th kernel to today's so as to hopefully restore the cool pre-Dec 5th ACPI behaviour which was: Hitting the power button did an orderly shutdown. Instead of Dec 5th's behaviour which is: Randomly (well mostly when I fat finger ^A-n to switch screens) failing to suspend to disk and then completely locking up. Hitting power button does an immediate shutdown.. like power OFF, no orderly shutdown, fsck at boot required, baby jesus cries etc. Well now I have a kernel that won't even boot, here's the dmesg from the Dec 5th kernel with a marker where the panic happens on the newer kernel (noted by: <<<PANIC HERE ON NEW KERNEL>>) any help would be appreciated. Machine is an old laptop, a Dell Latitude, celeron 300, 128 megs of ram. It seems to crash both with and without ACPI loaded now. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-BETA #0: Fri Dec 5 18:57:50 PST 2003 root_at_lappy.reserved:/usr/obj/usr/src/sys/lappy Preloaded elf kernel "/boot/kernel.old/kernel" at 0xc08d4000. Preloaded elf module "/boot/kernel.old/acpi.ko" at 0xc08d4204. Calibrating clock(s) ... i8254 clock: 1193044 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 297786292 Hz CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (127 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c26000 - 0x0000000007d89fff, 118898688 bytes (29028 pages) avail memory = 120684544 (115 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc06e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source> null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 02 20 01 00 01 00 00 00 00 22 00 00 01 27 00 00 02 00 01 00 01 09 01 00 01 1b 01 00 01 00 01 01 01 02 01 03 01 04 01 05 01 07 01 0d 01 0e 01 10 01 11 01 12 01 13 01 14 01 15 01 VESA: 22 mode(s) found VESA: v2.0, 2496k memory, flags:0x0, mode table:0xc07e2402 (1000022) VESA: MagicMedia 256 AV 48K VESA: NeoMagic MagicMedia 256 AV 01.0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: Other PM system enabled. pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcibios: BIOS version 2.10 Using $PIR table, 5 entries at 0xc00fbd20 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 13 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 B 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 17 D 0x62 3 4 5 6 7 9 10 11 12 14 15 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f4000000, size 26, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x011f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0 ns) pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 0:3 INTA BIOS irq 11 found-> vendor=0x104c, dev=0xac1c, revid=0x01 bus=0, slot=3, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 0:3 INTA BIOS irq 11 found-> vendor=0x104c, dev=0xac1c, revid=0x01 bus=0, slot=3, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00000860, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000ece0, size 5, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 0:7 INTD BIOS irq 11 found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00000840, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfd000000-0xfeffffff pcib1: prefetched decode 0xf9000000-0xfbffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base fb000000, size 24, enabled map[14]: type 1, range 32, base fdc00000, size 22, enabled map[18]: type 1, range 32, base fdb00000, size 20, enabled <<<PANIC HERE ON NEW KERNEL>> trap 12, fault addr: 0xb1e2 code _at_0xc00fc492 cmpb %cs:0xb1e2, %bh pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 1:0 INTA BIOS irq 11 found-> vendor=0x10c8, dev=0x0005, revid=0x12 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base fac00000, size 22, enabled map[14]: type 1, range 32, base fda00000, size 20, enabled pci_cfgintr_valid: BIOS irq 5 is valid pci_cfgintr: 1:0 INTB BIOS irq 5 found-> vendor=0x10c8, dev=0x8005, revid=0x12 bus=1, slot=0, func=1 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 powerspec 1 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pcib1: device pcm0 requested decoded memory range 0xfda00000-0xfdafffff pcm0: <NeoMagic 256AV> mem 0xfda00000-0xfdafffff,0xfac00000-0xfaffffff irq 5 at device 0.1 on pci1 pcib1: device pcm0 requested decoded memory range 0xfac00000-0xfaffffff pcib1: device pcm0 requested decoded memory range 0xfda00000-0xfdafffff pcm0: buftop is 0x0027ec00 pcm0: buftop is changed to 0x0027ec00 pcm0: <SigmaTel STAC9704 AC97 Codec (id = 0x83847605)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: rec buf 0xc97fec00 pcm0: play buf 0xc97fac00 cbb0: <TI1225 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac1c104c 0x02100007 0x06070001 0x00822008 0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00000000 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024f020 0x00000000 0x00000000 0x01261222 0x90: 0x616682c0 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00800000 0x0000001b 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <TI1225 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0xac1c104c 0x02100007 0x06070001 0x00822008 0x10: 0x88001000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x00000000 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x2024d020 0x00000000 0x00000000 0x01261222 0x90: 0x616682c0 0x00000000 0x00000000 0x00000000 0xa0: 0x7e210001 0x00800000 0x0000001b 0x00000007 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x860-0x86f at device 7.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) ex_isa_identify() ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it pcm: pcm0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 15 devices, largest 248 bytes PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x2 pnpbios: handle 0 device ID PNP0a03 (030ad041) PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0x100000-0x7ffffff, size=0x7f00000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000 PNP0c01: adding fixed memory32 range 0x100a0000-0x100bffff, size=0x20000 PNP0c01: adding io range 0x800-0x83f, size=0x40, align=0x1 PNP0c01: adding io range 0x840-0x84f, size=0x10, align=0x1 PNP0c01: adding io range 0x3f0-0x3f1, size=0x2, align=0x1 PNP0c01: adding io range 0xe0-0xe1, size=0x2, align=0x1 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0c01: adding fixed memory32 range 0xed000000-0xedffffff, size=0x1000000 PNP0c01: adding io range 0xf400-0xf4fe, size=0xff, align=0x1 pnpbios: handle 2 device ID PNP0c01 (010cd041) PNP0100: adding irq mask 0x1 PNP0100: adding io range 0x40-0x5f, size=0x20, align=0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0200: adding io range 0x80-0x9f, size=0x20, align=0x1 PNP0200: adding io range 0-0x1f, size=0x20, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 5 device ID PNP0200 (0002d041) PNP0303: adding irq mask 0x2 PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 7 device ID PNP0f13 (130fd041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 8 device ID PNP0800 (0008d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding io range 0x70-0x7f, size=0x10, align=0x1 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 10 device ID PNP0c04 (040cd041) PNP0e03: adding irq mask 0x20 PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 pnpbios: handle 11 device ID PNP0e03 (030ed041) PNP0501: adding irq mask 0x10 PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8 pnpbios: handle 12 device ID PNP0501 (0105d041) PNP0401: adding dma mask 0x8 PNP0401: adding irq mask 0x80 PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8 PNP0401: adding io range 0x778-0x77b, size=0x4, align=0x8 pnpbios: handle 14 device ID PNP0401 (0104d041) PNP0700: adding irq mask 0x40 PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x2 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x8 PNP0700: adding dma mask 0x4 pnpbios: handle 15 device ID PNP0700 (0007d041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 adv0 failed to probe on isa0 aha0 failed to probe on isa0 aic0 failed to probe on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 bt0 failed to probe on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pcic0 failed to probe at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic1: not probed (disabled) pmtimer0 on isa0 ppc0: not probed (disabled) sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x201 0x211 0x201 0x201 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: not probed (disabled) sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x700ff fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 isa_probe_children: probing PnP devices unknown: <PNP0c01> can't assign resources (port) unknown: <PNP0c01> at port 0x3f0-0x3f1,0x840-0x84f,0x800-0x83f iomem 0x100a0000-0x100bffff,0xfffe0000-0xffffffff,0xf0000-0xfffff,0x100000-0x7ffffff,0-0x9ffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0e03> can't assign resources (irq) unknown: <PNP0e03> at port 0x3e0-0x3e1 irq 5 on isa0 unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 ppc1: using extended I/O port range ppc1: ECP SPP ECP+EPP SPP ppc1: <ECP parallel printer port> at port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on isa0 ppc1: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc1: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc1 plip0: <PLIP network interface> on ppbus0 plip0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 vpo0: can't connect to the drive imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38 imm0: (connect) s1=0x38 s2=0x38, s3=0x38 imm0: (connect) s1=0x38 s2=0x38, s3=0x38 imm0: (connect) s1=0x38 s2=0x38, s3=0x38 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 Device configuration finished. procfs registered TSC timecounter disabled: APM enabled. Timecounter "TSC" frequency 297786292 Hz quality -1000 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled lo0: bpf attached ata1: spurious interrupt - status=0x00 error=0x00 pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: Addtron, AWP-100 Wireless PCMCIA, Version 01.02, pccard0: Manufacturer code 0x156, product 0x2 pccard0: function 0: network adapter, ccr addr 3e0 mask 1 pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel wi0: <Addtron AWP-100 Wireless PCMCIA> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0 wi0: 802.11 address: 00:90:d1:07:34:2e wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.3) wi0: bpf attached wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata0-master: setting PIO4 on Intel PIIX4 chip ata0-master: setting UDMA33 on Intel PIIX4 chip GEOM: create disk ad0 dp=0xc208c360 ad0: <IBM-DBCA-204860/BC3OA85F> ATA-4 disk at ata0-master ad0: 4645MB (9514260 sectors), 10068 C, 15 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 GEOM: new disk ad0 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on Intel PIIX4 chip acd0: <SAMSUNG CD-ROM SN-124/q008> CDROM drive at ata1 as master acd0: read 4134KB/s (4134KB/s), 128KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):591/254/63 s:63 l:9510417 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad0s1, start 32256 length 4869333504 end 4869365759 GEOM: Configure ad0s1a, start 0 length 125829120 end 125829119 GEOM: Configure ad0s1b, start 125829120 length 268435456 end 394264575 GEOM: Configure ad0s1c, start 0 length 4869333504 end 4869333503 GEOM: Configure ad0s1e, start 394264576 length 125829120 end 520093695 GEOM: Configure ad0s1f, start 520093696 length 4349239808 end 4869333503 Mounting root from ufs:/dev/ad0s1a start_init: trying /sbin/init Linux ELF exec handler installed o get around some grossness w -- - Alfred Perlstein - Research Engineering Development Inc. - email: bright_at_mu.org cell: 408-480-4684Received on Sat Feb 28 2004 - 03:42:35 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:45 UTC