Re: mlx driver related kernel panic in Freebsd 5.2.1-RELEASE

> Jonathan Weiss wrote:
>>>> OK, I seem to be able to get FreeBSD 5.2.1-RELEASE to reliably panic with
>>>> a "panic: free: address 0xd8d5e000(0xd8d5e000) has not been allocated." on
>>>> the serial console when it crashes.
>>>> 
>>>> I'm doing two copies of the entire ports collection to seperate
>>>> subdirectories when the crash occurs. It seems to do this regardless of
>>>> 
>>>> The machine is an IBM Netfinity 5500 with 4 x 550Mhz P3 Xeon CPUS, 2gigs
>>>> of ram and a Mylex DAC1100 RAID controller. There are 6 73G disks attached
>>>> to channel 0 of the controller, 5 disks are in a RAID 5 array, the sixth
>>>> is a hot spare.
>>>> 
>>>> Any ideas?
>>> 
>>> I see the same here with my p2 400 and a Mylex DAC960PL and 5x4,5 GB HDDs.
>>> Installing 5.2.1-RC2 fails with the same panic.
>>> 5.1 worked flawlessly.
>>> 
>>> Jonathan Weiss
>> 
>> 
>> Sorry for replying to myself, but I tried a snapshot (28/2/04) and got the
>> same panic. Installing 5.1 is working and until the end of january I also
>> had current without problems on this machine. I am not sure, but I think
>> that i also had 5.2.1-RC1 on this machine without problems, so the problem
>> may be introduced not long ago.
>> 
>> Thank you,
>> Jonathan Weiss
>> 
> 
> Can you try the attached patch?
> 
> Scott
> 
> Index: mlx.c
> ===================================================================
> RCS file: /usr/ncvs/src/sys/dev/mlx/mlx.c,v
> retrieving revision 1.44
> diff -u -r1.44 mlx.c
> --- mlx.c    22 Feb 2004 09:52:46 -0000    1.44
> +++ mlx.c    28 Feb 2004 17:48:59 -0000
> _at__at_ -1554,8 +1554,8 _at__at_
>    if ((mc->mc_complete == NULL) && (mc != NULL))
> mlx_releasecmd(mc);
>    /* we got an error, and we allocated a result */
> -    if ((error != 0) && (mc->mc_data != NULL)) {
> -    free(mc->mc_data, M_DEVBUF);
> +    if ((error != 0) && (result != NULL)) {
> +    free(result, M_DEVBUF);
> mc->mc_data = NULL;
>    }
>    return(result);
> 

I tried the patch, but i still get the same panic :-(

Maybe i did something wrong because it was the first time I built a release.
I cvsupped the cvs-tree to /home/ncvs with the
/usr/share/examples/cvsup/cvs-supfile, apllied your patch to
/home/ncvs/src/sys/dev/mlx/mlx.c,v. Then a checked src out from /home/ncvs
to /usr/src and did a buildworld.

After building the world, I did:

Cd release
make release CHROOTDIR=/home/mille/release BUILDNAME=5.2-MLX
CVSROOT=/home/ncvs MAKE_ISOS=yes NODOC=yes NO_FLOPPIES=yes NOPORTREADMES=yes
NOPORTS=yes

I then burned the miniinst.iso from /home/ncvs/release/R/cdrom.

Were these steps correct?

Thank you,
Jonathan