Kaarthik Sivakumar wrote: > Hi > > I have a DELL 2400 that has an Intel i845GL based board. I am currently > running 5.2-RC2 on it, mainly to get support for the onboard Broadcom 440X. > This machine has onboard sound that has been turned off in the BIOS and there > is a SoundBlaster Live! card in it. I kldload-ed the emu10k1 module (and > later on just kldload-ed snd_drivers) but this sound card is not identified > and no pcm device shows up in dmesg. I have attached dmesg output for this > and the output of 'pciconf -lv', which shows the sound blaster card but with > no drivers attached to it. > Your card is a Dell-specific SoundBlaster Live! CT0200. Note: > none3_at_pci1:6:0: class=0x040100 card=0x10031102 chip=0x00061102 ^^^^^^^^ instead of 00021102 > vendor = 'Creative Labs' > device = 'emu10k1x Soundblaster Live! 5.1' ^^^^^^^^ > class = multimedia > subclass = audio > none4_at_pci1:6:1: class=0x098000 card=0x10031102 chip=0x70041102 ^^^^^^^^ instead of 70021102 > vendor = 'Creative Labs' > device = 'SBLive! Value Gameport' ^^^^^ > class = input device which is NOT an emu10k1. Dell says it has a "software accelerated" DSP, needing a special driver à la Winmodem... The only known (to me) working driver for this card is the non free OSS driver from 4Front. I tried it, but found it simpler to buy a real Sound Blaster Live! > When I turn on the onboard sound in the BIOS, I see the 'pcm' line in dmesg. > What exactly should I be doing here to get the sound blaster card working? I > am still running the GENERIC kernel. I searched the archives of -current but > I havent found anything of use there. > > Thanks. > > kaarthik Claude BuissonReceived on Sat Jan 03 2004 - 06:26:19 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:36 UTC