Re: 5.2-R panic: bad pte

On Tue, 13 Jan 2004, Doug White wrote:

> On Tue, 13 Jan 2004, Igor Sysoev wrote:
> 
> >
> > I've cvsuped the sources 5.2-BETA to 5.2-RELEASE. While rebuilding
> > the system (make -j 3 buildworld) on 5.2-RELEASE kernel I've got the
> > following panic:
> >
> > panic: bad pte <<< this is the problem
> > cpuid = 0;
> > boot() called on cpu#0
> >
> > syncing disks, buffers remaining... panic: sleeping thread (pid 37514)
> owns a non-sleepable lock  <<< this is a side effect
> 
> Hardware description?

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #1: Tue Jan 13 12:36:04 MSK 2004
    root_at_XXXX.rambler.ru:/spool/obj/usr/src/sys/XXXX
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0731000.
ACPI APIC Table: <AMIINT AMIINI09>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2399.34-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf25  Stepping = 5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 2147418112 (2047 MB)
avail memory = 2084884480 (1988 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic3 <Version 1.1> irqs 48-63 on motherboard
Pentium Pro MTRR support enabled
    ACPI-0660: *** Warning: Type override - [MLIB] had invalid type (Integer) fo
r Scope operator, changed to (Scope)
acpi0: <AMIINT AMIINI09> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
pcibios: BIOS version 2.10
Using $PIR table, 18 entries at 0xc00f8270
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_cpu4: <CPU> on acpi0
device_probe_and_attach: acpi_cpu4 attach returned 6
acpi_cpu4: <CPU> on acpi0
device_probe_and_attach: acpi_cpu4 attach returned 6
acpi_cpu4: <CPU> on acpi0
device_probe_and_attach: acpi_cpu4 attach returned 6
acpi_cpu4: <CPU> on acpi0
device_probe_and_attach: acpi_cpu4 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 15 INTA is routed to irq 10
pci0: <display, VGA> at device 4.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x9c00-0x9c3f mem 0xfda00000-0xfda1fff
f,0xfdb00000-0xfdb00fff irq 17 at device 5.0 on pci0
fxp0: Ethernet address 00:20:ed:83:e3:ae
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB6 UDMA100 controller> port 0x9fd0-0x9fdf,0x374-0x377,0x
170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xc800-0xc8ff,0xcc00-0xccff m
em 0xfe800000-0xfe801fff irq 29 at device 3.0 on pci1
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0xc000-0xc0ff,0xc400-0xc4ff m
em 0xfe600000-0xfe601fff irq 30 at device 3.1 on pci1
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
pcib2: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xdc00-0xdc3f
 mem 0xfeb00000-0xfeb1ffff irq 19 at device 2.0 on pci2
em0:  Speed:N/A  Duplex:N/A
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu4: <CPU> on acpi0
device_probe_and_attach: acpi_cpu4 attach returned 6
acpi_cpu4: <CPU> on acpi0
device_probe_and_attach: acpi_cpu4 attach returned 6
acpi_cpu4: <CPU> on acpi0
device_probe_and_attach: acpi_cpu4 attach returned 6
acpi_cpu4: <CPU> on acpi0
device_probe_and_attach: acpi_cpu4 attach returned 6
fdc0: cmd 3 failed at out byte 1 of 3
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xc8000-0xd07ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f
0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acd0: CDROM <SR244W> at ata0-master PIO4
Waiting 2 seconds for SCSI devices to settle
GEOM: create disk da0 dp=0xc8115c50
GEOM: create disk da1 dp=0xc811f450
da0 at ahd0 bus 0 target 0 lun 0
da0: <IBM IC35L036UCDY10-0 S27E> Fixed Direct Access SCSI-3 device 
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enab
led
da0: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da1 at ahd1 bus 0 target 0 lun 0
da1: <IBM IC35L036UCDY10-0 S27E> Fixed Direct Access SCSI-3 device 
da1: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enab
led
da1: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/da0s1a
em0: Link is up 100 Mbps Full Duplex


Igor Sysoev
http://sysoev.ru/en/