It seems Jeffrey Katcher wrote: > ata1: reiniting channel .. > ata1: reset tp1 mask=03 ostat0=00 ostat1=00 > ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb > ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb > ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> > ata1: resetting done .. > ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin > ata1-master: setting PIO4 on Intel ICH4 chip > ata1-master: setting PIO4 on Intel ICH4 chip > ata1: device config done .. > > Fatal trap 12: page fault while in kernel mode > > Is that any help? And what do youhave on ata1 ? one ATAPI device as master ? This will break lots-a-stuff if so, the HW show's that there are two perfectly responding devices :( -Søren Yes I know it works under windows!!Received on Tue Jan 13 2004 - 08:33:04 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:37 UTC