Re: Problem with serial console (5.2)

From: Rob MacGregor <rob_macgregor_at_hotmail.com>
Date: Tue, 20 Jan 2004 13:43:25 +0000
>From: Lanny Baron <lnb_at_FreeBSDsystems.COM>
>
>On our iNET<tm> Servers, for our customers that want console redirection   
>set up 'out-of-the-box', we really only have to press a key when installing 
>and when the OK shows, type set console=comconsole and press enter then 
>type boot.
>
>I assume you have already installed. You really need to make sure that 
>whatever you are using to attach to the serial port is set at 9600 and if 
>you want a login: prompt you need to edit /etc/ttys and look at the lines 
>with '3wire' in it:
>
>
>ttyd0   "/usr/libexec/getty 3wire.9600" dialup  on secure
>ttyd1   "/usr/libexec/getty 3wire.9600" dialup  on secure
>
>That will make sure that upon boot you get a login: via Serial Console.
>
>I hope that helps you out.

Thanks, all I have to do now is swap my M-M DB9 cable for a null modem 
cable.  Despite saying "null modem" on the packing, a test with a multimeter 
shows that it's a straight through cable...

Anyway, sorry for bothering everybody, and thanks to those who responded.


  Please DO NOT send me ANY email directly unless it's a privacy issue.
       Reply-to mangled to assist those who don't read the above.
--
Rob  |  What part of "no" was it you didn't understand?

_________________________________________________________________
Sign-up for a FREE BT Broadband connection today! 
http://www.msn.co.uk/specials/btbroadband
Received on Tue Jan 20 2004 - 04:43:29 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:39 UTC