Hi all. I've got some problem with a SCSI DDS-4 tape streamer.. the system identifies it as: <ARCHIVE Python 06408-XXX 9050> Removable Sequential Access SCSI-3 device while the BIOS sais: Python 06408-XXX 80.0 it just doesn't behave as expected... the same problem is present since I first installed 5.0-RELEASE, then with 5.1-RELEASE and now with 5.2-RELEASE it seams that if I use a new tape, then I can dump on it.. but if I try to overwrite the tape, it starts behaving funny. also.. anytime I try to write to a non new tape, it will make errors and turn on the dirt led. The result is that it's not possible to make any reliable dump/restore on it. the tape drive is less than 1 year old and the tapes are of good quality. Thank you. ********************************************* web.dti.supsi.ch# uname -a FreeBSD web.dti.supsi.ch 5.2-RELEASE FreeBSD 5.2-RELEASE #0: Tue Jan 13 14:28:57 CET 2004 root_at_web.dti.supsi.ch:/usr/obj/usr/src/sys/WEB i386 web.dti.supsi.ch# cat mydump00.sh #!/bin/sh /sbin/dump -0uLaf /dev/nsa0 / /sbin/dump -0uLaf /dev/nsa0 /usr /sbin/dump -0uLaf /dev/nsa0 /var web.dti.supsi.ch# df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/amrd0s1a 257838 60070 177142 25% / devfs 1 1 0 100% /dev /dev/amrd0s1e 257838 12 237200 0% /tmp /dev/amrd0s1f 32123334 5850974 23702494 20% /usr /dev/amrd0s1d 257838 54726 182486 23% /var B:/usr/users 17782536 6544189 11062576 37% /usr/users web.dti.supsi.ch# dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RELEASE #0: Tue Jan 13 14:28:57 CET 2004 root_at_web.dti.supsi.ch:/usr/obj/usr/src/sys/WEB Preloaded elf kernel "/boot/kernel/kernel" at 0xc098c000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc098c21c. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.30-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073610752 (1023 MB) avail memory = 1033445376 (985 MB) ACPI APIC Table: <DELL PE2600 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 ioapic0: Changing APIC ID to 4 ioapic1: Changing APIC ID to 5 ioapic2: Changing APIC ID to 6 ioapic2: WARNING: intbase 72 != expected base 48 ioapic3: Changing APIC ID to 7 ioapic3: WARNING: intbase 120 != expected base 96 ioapic4: Changing APIC ID to 8 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 72-95 on motherboard ioapic3 <Version 2.0> irqs 120-143 on motherboard ioapic4 <Version 2.0> irqs 144-167 on motherboard Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL PE2600 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00fc160 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI2 - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1 pci2: <ACPI PCI bus> on pcib2 ahc0: <Adaptec 3960D Ultra160 SCSI adapter> port 0xec00-0xecff mem 0xfeaff000-0xfeafffff irq 24 at device 2.0 on pci2 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec 3960D Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfeafe000-0xfeafefff irq 25 at device 2.1 on pci2 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1 pci3: <ACPI PCI bus> on pcib3 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xdce0-0xdcff mem 0xfe8c0000-0xfe8dffff,0xfe8e0000-0xfe8fffff irq 28 at device 1.0 on pci3 em0: Speed:N/A Duplex:N/A pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib4: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI3 - AE_NOT_FOUND pci4: <ACPI PCI bus> on pcib4 pci4: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci4 pci5: <ACPI PCI bus> on pcib5 pci4: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib6: <ACPI PCI-PCI bridge> at device 31.0 on pci4 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pcib7: could not get PCI interrupt routing table for \\_SB_.PCI0.PCI4 - AE_NOT_FOUND pci7: <ACPI PCI bus> on pcib7 pci7: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib8: <ACPI PCI-PCI bridge> at device 29.0 on pci7 pci8: <ACPI PCI bus> on pcib8 amr0: <LSILogic MegaRAID> mem 0xfbff0000-0xfbffffff irq 120 at device 8.0 on pci8 amr0: <LSILogic PERC 4/Di> Firmware 2.24, BIOS 1.03, 128MB RAM pci7: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib9: <ACPI PCI-PCI bridge> at device 31.0 on pci7 pci10: <ACPI PCI bus> on pcib9 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbce0-0xbcff irq 16 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib10 pci11: <display, VGA> at device 4.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: DVDROM <HL-DT-STDVD-ROM GDR8081N> at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle amrd0: <LSILogic MegaRAID logical drive> on amr0 amrd0: 34678MB (71020544 sectors) RAID 1 (optimal) GEOM: create disk amrd0 dp=0xc6bfb08c amrd1: <LSILogic MegaRAID logical drive> on amr0 amrd1: 34556MB (70770688 sectors) RAID 0 (optimal) GEOM: create disk amrd1 dp=0xc6bfb20c sa0 at ahc0 bus 0 target 6 lun 0 sa0: <ARCHIVE Python 06408-XXX 9050> Removable Sequential Access SCSI-3 device sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit) ses0 at amr0 bus 0 target 6 lun 0 ses0: <PE/PV 2x3 SCSI BP 1.1> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device ses1 at amr0 bus 1 target 6 lun 0 ses1: <PE/PV 2x3 SCSI BP 1.1> Fixed Processor SCSI-2 device ses1: SAF-TE Compliant Device SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Mounting root from ufs:/dev/amrd0s1a em0: Link is up 100 Mbps Full Duplex (sa0:ahc0:0:6:0): WRITE FILEMARKS. CDB: 10 0 0 0 1 0 (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error (sa0:ahc0:0:6:0): SCSI Status: Check Condition (sa0:ahc0:0:6:0): MEDIUM ERROR asc:3,2 (sa0:ahc0:0:6:0): Excessive write errors (sa0:ahc0:0:6:0): Retries Exhausted (sa0:ahc0:0:6:0): failed to write terminating filemark(s) (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ahc0:0:6:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error (sa0:ahc0:0:6:0): SCSI Status: Check Condition (sa0:ahc0:0:6:0): MEDIUM ERROR asc:3,2 (sa0:ahc0:0:6:0): Excessive write errors (sa0:ahc0:0:6:0): Retrying Command (per Sense Data) (sa0:ahc0:0:6:0): ERASE. CDB: 19 1 0 0 0 0 (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error (sa0:ahc0:0:6:0): SCSI Status: Check Condition (sa0:ahc0:0:6:0): MEDIUM ERROR asc:3,2 (sa0:ahc0:0:6:0): Excessive write errors (sa0:ahc0:0:6:0): Retries Exhausted (sa0:ahc0:0:6:0): WRITE FILEMARKS. CDB: 10 0 0 0 1 0 (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error (sa0:ahc0:0:6:0): SCSI Status: Check Condition (sa0:ahc0:0:6:0): MEDIUM ERROR asc:3,2 (sa0:ahc0:0:6:0): Excessive write errors (sa0:ahc0:0:6:0): Retries Exhausted (sa0:ahc0:0:6:0): failed to write terminating filemark(s) (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ahc0:0:6:0): WRITE FILEMARKS. CDB: 10 0 0 0 1 0 (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error (sa0:ahc0:0:6:0): SCSI Status: Check Condition (sa0:ahc0:0:6:0): MEDIUM ERROR asc:3,2 (sa0:ahc0:0:6:0): Excessive write errors (sa0:ahc0:0:6:0): Retries Exhausted (sa0:ahc0:0:6:0): failed to write terminating filemark(s) (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ahc0:0:6:0): WRITE FILEMARKS. CDB: 10 0 0 0 1 0 (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error (sa0:ahc0:0:6:0): SCSI Status: Check Condition (sa0:ahc0:0:6:0): MEDIUM ERROR asc:3,2 (sa0:ahc0:0:6:0): Excessive write errors (sa0:ahc0:0:6:0): Retries Exhausted (sa0:ahc0:0:6:0): failed to write terminating filemark(s) (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ahc0:0:6:0): SCB 0x3 - timed out >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahc0: Dumping Card State while idle, at SEQADDR 0x9 Card was paused ACCUM = 0x4, SINDEX = 0x67, DINDEX = 0x27, ARG_2 = 0x0 HCNT = 0x0 SCBPTR = 0x0 SCSIPHASE[0x0] SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0xa]:(SELWIDE|SELBUSB) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x0] SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8]:(ENSWRAP) SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL) STACK: 0x0 0x163 0x178 0x3 SCB count = 20 Kernel NEXTQSCB = 14 Card NEXTQSCB = 14 QINFIFO entries: Waiting Queue entries: Disconnected Queue entries: 0:3 QOUTFIFO entries: Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 0 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0] SCB_TAG[0x3] 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 16 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 17 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 18 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 19 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 20 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 21 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 22 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 23 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 24 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 25 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 26 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 27 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 28 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 29 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 30 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] 31 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] Pending list: 3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x67] SCB_LUN[0x0] Kernel Free SCB list: 15 16 17 18 19 0 1 2 4 5 6 7 8 9 13 12 11 10 Untagged Q(6): 3 >>>>>>>>>>>>>>>>> sg[0] - Addr 0x29680000 : Length 4096 sg[1] - Addr 0x33e41000 : Length 4096 sg[2] - Addr 0x196a2000 : Length 4096 sg[3] - Addr 0x38a03000 : Length 4096 sg[4] - Addr 0x15524000 : Length 4096 sg[5] - Addr 0x14a05000 : Length 4096 sg[6] - Addr 0x16bc6000 : Length 4096 sg[7] - Addr 0x29167000 : Length 4096 (sa0:ahc0:0:6:0): Queuing a BDR SCB (sa0:ahc0:0:6:0): Bus Device Reset Message Sent (sa0:ahc0:0:6:0): no longer in timeout, status = 34b ahc0: Bus Device Reset on A:6. 1 SCBs aborted (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error (sa0:ahc0:0:6:0): SCSI Status: Check Condition (sa0:ahc0:0:6:0): UNIT ATTENTION asc:29,0 (sa0:ahc0:0:6:0): Power on, reset, or bus device reset occurred (sa0:ahc0:0:6:0): Unretryable error (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. (sa0:ahc0:0:6:0): WRITE FILEMARKS. CDB: 10 0 0 0 1 0 (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error (sa0:ahc0:0:6:0): SCSI Status: Check Condition (sa0:ahc0:0:6:0): MEDIUM ERROR asc:3,2 (sa0:ahc0:0:6:0): Excessive write errors (sa0:ahc0:0:6:0): Retries Exhausted (sa0:ahc0:0:6:0): failed to write terminating filemark(s) (sa0:ahc0:0:6:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM command to clear this state. -- Roberto Nunnari -software engineer- mailto:roberto.nunnari_at_supsi.ch Scuola Universitaria Professionale della Svizzera Italiana Dipartimento Tecnologie Innovative http://www.dti.supsi.ch SUPSI-DTI Via Cantonale tel: +41-91-6108561 6928 Manno """ fax: +41-91-6108570 Switzerland (o o) =======================oOO==(_)==OOo========================Received on Wed Jan 21 2004 - 09:22:59 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:39 UTC