hi there... i cvsupped some minutes ago, and built a new kernel after i saw an issue on this current list meaning it would be fixed... and after i saw some changes by sos while cvsupping... not the message (see subject) about timout is gone... but the kernel still does not boot... it just hangs at the same position. i turned off apic and acpi... the courious this is... when i boot with -v... sometimes... only _sometimes_... the kernel boots fully into console... this is very strange... (and strongly indicates a timing issue?) in -v boot bode i see the freeze happening after: -> ata1-slave: setting PIO4 on VIA 8235 chip some other small stalls seem to happen after: -> GEOM: configure... and as the other posts.. its a liteon-cdrw at ata1-slave is this realy a problem with liteon ?! i remember i read in the linux kernel list, that sometime ago, they had problems with a cdrom by sony... i cant remember what exactly the problemw as... but they someone pointed out this drive does strange things... maybe some parallels with this issue now? now the "boot -v kernel" output... well, this output was taken while the boot finished... no freeze... but the next boot did freeze again... realy! btw: i set the system to no-overclock to test if that was the issue... without success... the overclocking didnt matter... -------- boot -v output ----- Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #0: Sat Jan 31 01:25:39 CET 2004 root_at_isis.localnet:/usr/obj/usr/src/sys/ISIS Preloaded elf kernel "/boot/kernel/kernel" at 0xc07f1000. Calibrating clock(s) ... i8254 clock: 1193250 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1853661375 Hz CPU: AMD Athlon(tm) XP 2200+ (1853.66-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536805376 (511 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000826000 - 0x000000001f6bffff, 518627328 bytes (126618 pages) avail memory = 519757824 (495 MB) bios32: Found BIOS32 Service Directory header at 0xc00fdac0 bios32: Entry = 0xfdad0 (c00fdad0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xdaf1 pnpbios: Found PnP BIOS data at 0xc00f7990 pnpbios: Entry = f0000:685b Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source> mem: <memory & I/O> Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x80008840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31891106) pcibios: BIOS version 2.10 Using $PIR table, 14 entries at 0xc00f8000 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 1 B 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 17 A 0xfe 14 embedded 0 17 B 0xff 15 embedded 0 17 C 0x03 3 4 5 6 7 10 11 12 14 15 slot 1 0 5 A 0x01 3 4 5 6 7 10 11 12 14 15 slot 1 0 5 B 0x02 3 4 5 6 7 10 11 12 14 15 slot 1 0 5 C 0x03 3 4 5 6 7 10 11 12 14 15 slot 1 0 5 D 0x05 3 4 5 6 7 10 11 12 14 15 slot 2 0 6 A 0x02 3 4 5 6 7 10 11 12 14 15 slot 2 0 6 B 0x03 3 4 5 6 7 10 11 12 14 15 slot 2 0 6 C 0x05 3 4 5 6 7 10 11 12 14 15 slot 2 0 6 D 0x01 3 4 5 6 7 10 11 12 14 15 slot 3 0 7 A 0x05 3 4 5 6 7 10 11 12 14 15 slot 3 0 7 B 0x01 3 4 5 6 7 10 11 12 14 15 slot 3 0 7 C 0x02 3 4 5 6 7 10 11 12 14 15 slot 3 0 7 D 0x03 3 4 5 6 7 10 11 12 14 15 slot 4 0 8 A 0x03 3 4 5 6 7 10 11 12 14 15 slot 4 0 8 B 0x05 3 4 5 6 7 10 11 12 14 15 slot 4 0 8 C 0x01 3 4 5 6 7 10 11 12 14 15 slot 4 0 8 D 0x02 3 4 5 6 7 10 11 12 14 15 slot 5 0 10 A 0x02 3 4 5 6 7 10 11 12 14 15 slot 5 0 10 B 0x03 3 4 5 6 7 10 11 12 14 15 slot 5 0 10 C 0x05 3 4 5 6 7 10 11 12 14 15 slot 5 0 10 D 0x01 3 4 5 6 7 10 11 12 14 15 slot 6 0 11 A 0x03 3 4 5 6 7 10 11 12 14 15 slot 6 0 11 B 0x05 3 4 5 6 7 10 11 12 14 15 slot 6 0 11 C 0x01 3 4 5 6 7 10 11 12 14 15 slot 6 0 11 D 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 12 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 13 A 0x05 3 4 5 6 7 10 11 12 14 15 embedded 0 14 A 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 16 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 16 B 0x02 3 4 5 6 7 10 11 12 14 15 embedded 0 16 C 0x03 3 4 5 6 7 10 11 12 14 15 embedded 0 16 D 0x05 3 4 5 6 7 10 11 12 14 15 embedded 0 18 A 0x01 3 4 5 6 7 10 11 12 14 15 embedded 0 15 A 0x03 3 4 5 6 7 10 11 12 14 15 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 27, enabled found-> vendor=0x1106, dev=0x3189, revid=0x00 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=0x1106, dev=0xb168, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 0000e800, size 5, enabled pci_cfgintr_valid: BIOS irq 10 is valid pci_cfgintr: 0:10 INTA BIOS irq 10 found-> vendor=0x1102, dev=0x0002, revid=0x0a bus=0, slot=10, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=10 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000ec00, size 3, enabled found-> vendor=0x1102, dev=0x7002, revid=0x0a bus=0, slot=10, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000e400, size 7, enabled map[14]: type 1, range 32, base dfffff80, size 7, enabled pci_cfgintr_valid: BIOS irq 5 is valid pci_cfgintr: 0:11 INTA BIOS irq 5 found-> vendor=0x10b7, dev=0x9200, revid=0x78 bus=0, slot=11, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000e000, size 5, enabled pci_cfgintr_valid: BIOS irq 11 is valid pci_cfgintr: 0:16 INTA BIOS irq 11 found-> vendor=0x1106, dev=0x3038, revid=0x80 bus=0, slot=16, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dffffe00, size 8, enabled pci_cfgintr_valid: BIOS irq 3 is valid pci_cfgintr: 0:16 INTD BIOS irq 3 found-> vendor=0x1106, dev=0x3104, revid=0x82 bus=0, slot=16, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=3 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1106, dev=0x3177, revid=0x00 bus=0, slot=17, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000fc00, size 4, enabled found-> vendor=0x1106, dev=0x0571, revid=0x06 bus=0, slot=17, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D3 current D0 agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 229M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xdde00000-0xdfefffff pcib1: prefetched decode 0xcdd00000-0xddcfffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base de000000, size 24, enabled map[14]: type 3, range 32, base d0000000, size 27, enabled pci_cfgintr_search: linked (1) to configured irq 11 at 0:16:0 pci_cfgintr: 0:1 INTA routed to irq 11 pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x10de, dev=0x0281, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) pcm0: <Creative EMU10K1> port 0xe800-0xe81f irq 10 at device 10.0 on pci0 emu: setmap (1f2000, 800), nseg=1, error=0 emu: setmap (1f1000, 1000), nseg=1, error=0 pcm0: <SigmaTel STAC9708/11 AC97 Codec (id = 0x83847608)> pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features surround DAC emu: setmap (22f000, 1000), nseg=1, error=0 emu: setmap (1d5000, 1000), nseg=1, error=0 emu: setmap (1f7000, 1000), nseg=1, error=0 emu: setmap (241000, 1000), nseg=1, error=0 pcm0: sndbuf_setmap 2bf000, 1000; 0xc404b000 -> 2bf000 pcm0: sndbuf_setmap 23d000, 1000; 0xc4049000 -> 23d000 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xdfffff80-0xdfffffff irq 5 at device 11.0 on pci0 xl0: using memory mapped I/O xl0: Ethernet address: 00:04:75:d2:d4:a2 xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x00105a, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: bpf attached uhci0: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 16.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 16.3 (no driver attached) isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER> ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=50 ata1-master: stat=0x90 err=0x01 lsb=0x14 msb=0xeb ata1-master: stat=0x90 err=0x01 lsb=0x14 msb=0xeb ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 11 devices, largest 126 bytes PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0a03: adding io range 0x22-0x22, size=0x1, align=0x1 PNP0a03: adding io range 0x72-0x75, size=0x4, align=0x1 PNP0a03: adding io range 0x400-0x40f, size=0x10, align=0x1 PNP0a03: adding io range 0x800-0x87f, size=0x80, align=0x1 PNP0a03: adding io range 0x880-0x8ff, size=0x80, align=0x1 PNP0a03: adding io range 0x2e-0x2e, size=0x1, align=0x1 PNP0a03: adding io range 0x2f-0x2f, size=0x1, align=0x1 pnpbios: handle 0 device ID PNP0a03 (030ad041) PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00 PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0x1ffeffff, size=0x1fef0000 PNP0c01: adding fixed memory32 range 0x1fff0000-0x1fff7fff, size=0x8000 PNP0c01: adding fixed memory32 range 0x1fff8000-0x1fffffff, size=0x8000 PNP0c01: adding fixed memory32 range 0xfec00000-0xfec00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfee00000-0xfee00fff, size=0x1000 PNP0c01: adding fixed memory32 range 0xfff80000-0xffffffff, size=0x80000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding dma mask 0x10 PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1 PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1 PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1 PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1 pnpbios: handle 3 device ID PNP0200 (0002d041) PNP0100: adding irq mask 0x1 PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1 pnpbios: handle 5 device ID PNP0b00 (000bd041) PNP0303: adding irq mask 0x2 PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1 pnpbios: handle 6 device ID PNP0303 (0303d041) PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 7 device ID PNP0800 (0008d041) PNP0c04: adding irq mask 0x2000 PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1 pnpbios: handle 8 device ID PNP0c04 (040cd041) PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x4 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 9 device ID PNP0700 (0007d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 10 device ID PNP0f13 (130fd041) sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0-6f, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:08, syncbits:08 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices unknown: <PNP0303> can't assign resources (port) unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0700> can't assign resources (port) unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0 unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0f13> at irq 12 on isa0 Device configuration finished. procfs registered Timecounter "TSC" frequency 1853661375 Hz quality 800 Timecounters tick every 10.000 msec BRIDGE 031224 loaded lo0: bpf attached ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin ata0-master: setting PIO4 on VIA 8235 chip ata0-master: setting UDMA100 on VIA 8235 chip ata0-slave: setting PIO4 on VIA 8235 chip ata0-slave: setting UDMA100 on VIA 8235 chip ad0: <WDC WD1200JB-00CRA1/17.07W17> ATA-5 disk at ata0-master ad0: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad0 [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1019/254/63 s:63 l:16386237 [1] f:80 typ:165 s(CHS):1020/0/1 e(CHS):1023/254/63 s:16386300 l:16370235 [2] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/254/63 s:32756535 l:81915435 [3] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/254/63 s:114671970 l:119764575 GEOM: Configure ad0s1, start 32256 length 8389753344 end 8389785599 GEOM: Configure ad0s2, start 8389785600 length 8381560320 end 16771345919 GEOM: Configure ad0s3, start 16771345920 length 41940702720 end 58712048639 GEOM: Configure ad0s4, start 58712048640 length 61319462400 end 120031511039 ad1: <IC35L040AVVA07-0/VA2OA50K> ATA-5 disk at ata0-slave ad1: 39266MB (80418240 sectors), 79780 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ata1-master: setting PIO4 on VIA 8235 chip GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455 GEOM: Configure ad0s2b, start 268435456 length 1047306240 end 1315741695 GEOM: Configure ad0s2c, start 0 length 8381560320 end 8381560319 GEOM: Configure ad0s2d, start 1315741696 length 268435456 end 1584177151 GEOM: Configure ad0s2e, start 1584177152 length 268435456 end 1852612607 GEOM: Configure ad0s2f, start 1852612608 length 4194304000 end 6046916607 GEOM: Configure ad0s2g, start 6046916608 length 2334643712 end 8381560319 ata1-slave: setting PIO4 on VIA 8235 chip GEOM: new disk ad1 acd0: <JLMS XJ-HD165H/CH11> DVDROM drive at ata1 as master acd0: read 8268KB/s (8268KB/s), 512KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc acd1: <LITE-ON LTR-52246S/6S0F> CDRW drive at ata1 as slave acd1: read 20109KB/s (8937KB/s) write 172KB/s (8937KB/s), 2048KB buffer, PIO4 acd1: Reads: CDR, CDRW, CDDA stream, packet acd1: Writes: CDR, CDRW, test write, burnproof acd1: Audio: play, 255 volume levels acd1: Mechanism: ejectable tray, unlocked acd1: Medium: no/blank disc [0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:61432497 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad1s1, start 32256 length 31453438464 end 31453470719 (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe0:ata0:0:0:0): error 22 (probe0:ata0:0:0:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe1:ata0:0:1:0): error 22 (probe1:ata0:0:1:0): Unretryable Error (probe2:ata1:0:0:0): Retrying Command (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error (probe2:ata1:0:0:0): Retrying Command (probe2:ata1:0:0:0): error 22 (probe2:ata1:0:0:0): Unretryable Error (probe3:ata1:0:1:0): Retrying Command (probe3:ata1:0:1:0): error 22 (probe3:ata1:0:1:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: <JLMS XJ-HD165H CH11> Removable CD-ROM SCSI-0 device pass0: 16.000MB/s transfers pass1 at ata1 bus 0 target 1 lun 0 pass1: <LITE-ON LTR-52246S 6S0F> Removable CD-ROM SCSI-0 device pass1: 16.000MB/s transfers (cd0:ata1:0:0:0): Retrying Command GEOM: new disk cd0 GEOM: new disk cd1 (cd1:ata1:0:1:0): Retrying Command (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: <JLMS XJ-HD165H CH11> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error cd1 at ata1 bus 0 target 1 lun 0 cd1: <LITE-ON LTR-52246S 6S0F> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata1:0:0:0): Retrying Command (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): Retrying Command (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd1:ata1:0:1:0): Retrying Command (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error (cd1:ata1:0:1:0): Retrying Command (cd1:ata1:0:1:0): error 6 (cd1:ata1:0:1:0): Unretryable Error Mounting root from ufs:/dev/ad0s2a start_init: trying /sbin/init psmintr: unknown PS2++ packet type 11: 0xe8 0xfa 0xaa EugeneReceived on Fri Jan 30 2004 - 16:20:15 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:40 UTC