802.11g/GPRS broadcom cardbus

Hello

Plugging this :

Status is 0x30000920
cbb1: card inserted: event=0x00000000, state=30000920
cbb1: cbb_power: 3V
TUPLE: LINKTARGET [3]: 43 49 53
Product version: 8.0
Product name: Broadcom | 802.11g/GPRS CardBus | 1.0 | 
Manufacturer ID: d0023204
Function Extension: 040600904c620007
Functions: Network Adaptor
TUPLE: Unknown(0x00) [34]:
       0x00: 02 01 07 22 05 02 40 42 0f 00 22 05 02 80 84 1e
       0x10: 00 22 05 02 60 ec 53 00 22 05 02 c0 d8 a7 00 22
       0x20: 05 02
TUPLE: Unknown(0x80) [141]:
       0x00: 5b 00 22 05 02 40 54 89 00 22 05 02 00 1b b7 00
       0x10: 22 05 02 80 a8 12 01 22 05 02 00 36 6e 01 22 05
       0x20: 02 00 51 25 02 22 05 02 00 6c dc 02 22 05 02 80
       0x30: f9 37 03 22 02 03 07 22 02 05 01 07 06 01 00 00
       0x40: 10 00 00 1c 04 02 d9 09 ff 04 06 03 01 00 00 00
       0x50: 00 05 07 41 b0 b0 ff ff 02 01 ff 00 ff ff ff ff
       0x60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
       0x70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
       0x80: ff ff ff ff ff ff ff ff ff ff ff ff ff
CIS reading done
cardbus1: Resource not specified in CIS: id=10, size=2000
cardbus1: Non-prefetchable memory at c0202000-c0203fff
cardbus1: <network> at device 0.0 (no driver attached)
cardbus1: Resource not specified in CIS: id=10, size=100
cardbus1: IO port at 4000-40ff
cardbus1: <simple comms, UART> at device 0.1 (no driver attached)
cbb1: cbb_power: 0V
cbb1: CardBus card activation failed
Status is 0x30000126


Is there a way of making it work ? (at least the serial interface)

Thanks !

Nicolas