Hi I am trying to configure my atheros interface to run at OFDM/6Mbps in 11a mode, but somehow the interface automatically selects a higher rate (according to wicontrol) Are there any thing more than ifconfig media OFDM/6Mbps that I need so set to force the interface to use OFDM/6Mbps. (Kernel = 5-20040625-CURRENT ) ath1# ifconfig ath0 10.10.20.1/24 ssid ath101 media OFDM/6Mbps mode 11a mediaopt adhoc ath1# ifconfig ath0 ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.10.20.1 netmask 0xffffff00 broadcast 10.10.20.255 inet6 fe80::205:5dff:fe97:9801%ath0 prefixlen 64 scopeid 0x4 ether 00:05:5d:97:98:01 media: IEEE 802.11 Wireless Ethernet OFDM/6Mbps mode 11a <adhoc> (autoselect <adhoc>) status: associated ssid ath101 1:ath101 channel 36 authmode OPEN powersavemode OFF powersavesleep 100 rtsthreshold 2312 protmode CTS wepmode OFF weptxkey 1 ath1# wicontrol ath0 NIC serial number: [ ] Station name: [ ath1.icomtek.csir.co.za ] SSID for IBSS creation: [ ath101 ] Current netname (SSID): [ ath101 ] Desired netname (SSID): [ ath101 ] Current BSSID: [ 02:05:5d:97:98:01 ] Channel list: [ 0 0 1110 1 0 0 0 0 0 2220 22 ] IBSS channel: [ 36 ] Current channel: [ 36 ] Comms quality/signal/noise: [ 0 26 0 ] Promiscuous mode: [ Off ] Intersil-Prism2 based card: [ 1 ] Port type (1=BSS, 3=ad-hoc): [ 0 ] MAC address: [ 00:05:5d:97:98:01 ] TX rate (selection): [ 6 ] TX rate (actual speed): [ 54 ] RTS/CTS handshake threshold: [ 2312 ] Create IBSS: [ On ] Access point density: [ 1 ] Power Mgmt (1=on, 0=off): [ 0 ] Max sleep time: [ 100 ] WEP encryption: [ Off ] TX encryption key: [ 1 ] Encryption keys: [ ][ ][ ][ ] Johann HugoReceived on Tue Jun 29 2004 - 19:13:18 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:59 UTC