Re: 5.2.1 : general protection fault without ACPI

> Nate Lawson wrote:
>
> >You might want to try booting with device apic disabled.  Also, can you
> >send me a link to your ASL?
> >
> >   acpidump -t -d > niraj.asl
> >
> >The ACPI debugging section of the handbook suggests this:
> >http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/acpi-debug.html
> >
>
On Thu, 11 Mar 2004, Niraj Kumar wrote:
> Well , actually  I had added this line to device conf file:
> hint.apic.0.disabled=``1'
> and booted , but  I got the same crash (general protection fault) .
> So my system became unbootable after this point.
>
> I had to reboot into Linux and enable ufs support and then mount the
> freebsd root partition and
> remove that line before my system got bootable again .
>
> I think the issue here is that I should atleast be able to boot without
> ACPI .
>
> Anyway I will try to get that acpidump and post it .

Please don't top post.  You don't have to add things to the loader.conf
file, you can manually do them at boot time with the "set" command at the
loader prompt.

My laptop used to boot fine without ACPI and now no longer boots without
it.  It hangs halfway through the boot sequence.  I haven't had time to
track it down.  Some laptops cannot boot at all without ACPI.  In the
future, PC vendors will not make ACPI optional.

I want the acpidump to look into the ATA irq routing warnings, not sure
about the GPF you mentioned.  Hopefully someone else can look at this.

-Nate