Hello! We use several Cyclades port cards in FreeBSD 4.x. I tried upgrading one of the servers to 5.2.1 this week, but it just hung after recognizing the Cyclades card during boot. If I disconnected the external cable from the pci card the boot went fine, so it seems that it was some scanning of the external port card that generated the problem. Here are the boot messages just before the boot process hung: cy0: <Cyclades Cyclom-Y Serial Adapter> port 0xa400-0xa47f mem 0xd0034000-0xd0037fff, 0xd0039000-0xd003907f irq 18 at device 10.0 on pci1 pcib1: device cy0 requested decoded I/O range 0xa400-0xa47f pcib1: device cy0 requested decoded memory range 0xd0034000-0xd0037fff Is anyone using Cyclades port cards in 5.2.1? Is there some way to get rid of the need to include COMPAT_OLDISA for the cyclades driver (is there some way to make a separate pci driver or just strip the isa code from the driver)? Thanks! -- Peter Olsson pol_at_leissner.se CCIE #8963 +46 520 500511 Leissner Data AB +46 701 809511Received on Mon Mar 15 2004 - 11:23:56 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:47 UTC