cardbus trouble

Hi.

A 3com 3CRPAG175 (ath) is no longer recognized (or so).
This is new. Previous cvsup was approx 2weeks (best guess). All was fine then.
This is cvsup of may 6 2004.
Insertion of Intel EtherExpress works flawlessly.
Either booting with the ath card already inserted or inserting when up, gives same 
mesg.
Disabling acpi doesn't help.
hw.pci.allow_unsupported_io_range=1 doesn't help.
Tried other, identical card to rule _that_ out; same prob.
Yes, ath and ath_hal  are in the kernel. As said, it did work.
Machine is Compaq Presario 1600-XL144 (laptop).
There's also some other stuff slightly 'off', but non-functioning ath bugs me most.
oh,.. and the uhub0 error is also new. It seems to work though.

Please CC me, as all those lists were driving me up the walls.
If I've missed something obvious, I appologize on forehand :-)
Related to recent pci /acpi changes?

dmesg shows insertion of ath card-> failure, followed by insertion of xe card-
>succes.


grtz,
Dylan


Here's dmesg:

##
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 
1993, 1994
	The Regents of the University of California. All rights 
reserved.
FreeBSD 5.2-CURRENT #0: Thu May  6 17:21:47 CEST 2004
    root_at_blankerdieblank:/usr/obj/usr/src/sys/PRESARIO
Preloaded elf kernel "/boot/kernel/kernel" at 0xc086d000.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 
0xc086d1f4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc086d2a8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc086d354.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (466.06-MHz 686-class 
CPU)
  Origin = "GenuineIntel"  Id = 0x665  Stepping = 5
  
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR
,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 192872448 (183 MB)
avail memory = 179036160 (170 MB)
Pentium Pro MTRR support enabled
random: <entropy source, Software, Yarrow>
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b 
on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 7 INTD is routed to irq 11
pcib0: slot 7 INTC is routed to irq 9
pcib0: slot 7 INTC is routed to irq 9
pcib0: slot 9 INTA is routed to irq 11
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-
0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 
0xf8000000
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for 
\\_SB_.PCI0.AGP_ - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686A UDMA66 controller> port 0x1820-
0x182f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on 
pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1820
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: at 0x1f0 irq 14 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 11 
at device 7.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
isab1: <PCI-ISA bridge> at device 7.4 on pci0
device_probe_and_attach: isab1 attach returned 6
pcm0: <VIA VT82C686A> port 0x1830-0x1833,0x1834-0x1837,0x1000-
0x10ff irq 9 at device 7.5 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1000
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1881 AC97 Codec>
pci0: <simple comms> at device 7.6 (no driver attached)
pci0: <simple comms> at device 9.0 (no driver attached)
cbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 
0xf0000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 10 INTA is routed to irq 9
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on 
acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> 
port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
acpi_ec0: <Embedded Controller: GPE 0x6> port 0x66,0x62 on 
acpi0
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xc0000-0xcbfff 
on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-
0xbffff on isa0
Timecounter "TSC" frequency 466061266 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding 
enabled, default to deny, logging limited to 10 packets/entry 
by default
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master 
UDMA66
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2302> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
nfs send error 13 for server pid343_at_presario:/host
cardbus0: Resource not specified in CIS: id=10, size=800000
cardbus0: Resource not specified in CIS: id=14, size=20000
cardbus0: Resource not specified in CIS: id=18, size=800000
cardbus0: <display, VGA> at device 0.0 (no driver attached)
cbb0: CardBus card activation failed
xe0: <Intel EtherExpress(TM) PRO/100 PC Card Mobile Adapter16> 
at port 0x100-0x10f irq 9 function 0 config 1 on pccard0
xe0: [GIANT-LOCKED]
xe0: Intel EtherExpress(TM) PRO/100 PC Card Mobile Adapter16, 
version 0x45/0x04, 100Mbps capable
xe0: Ethernet address: 00:a0:c9:38:b7:0c
##