Hi, Situation: The computer will lock up real tight (no keyboard light working, no kernel debugger, no network, no disk) running fsck. (Dual P4 Xeon 2.4Ghz, 2GB RAM, using a Promise PDC20378 SATA150 controller in mirror mode on two identical Seagate ST3160023AS drives) This just happen after a lockup with XFree, thus I dont have a theorie nor any infos on a way to figure out which fix/patch introduce this problem. Work done: Platform test: CPU's, Memory, Disk, Temperature, power supply. All Ok. Was using a 2 weeks old current, updated to latest current this morning, no luck. Change the kernel from SMP to UP, no luck. Try different method/parms with fsck, no luck Been googling for reference or similar situation without luck. Things to do: Have yet to try with RELENG_5_2. use strace to see where this happen. Add debugging code to fsck to find where this happen. Status: The file system seems ok, all files are there, find works, no obvious inconsistency, dd if=/dev/ar0s1 dump the entire disk without any errors. Request: Any hint? This combinaison of hardware is deployed (10+ servers) for months now and this is the first problem I encounter. But this is also the only one running current. Config: ----- # disklabel -r /dev/ar0s1 # /dev/ar0s1: 8 partitions: # size offset fstype [fsize bsize bps/cpg] a: 304107709 8388608 4.2BSD 2048 16384 28552 b: 8388608 0 swap c: 312496317 0 unused 0 0 # "raw" part, don't edit ----- # tunefs -p /dev/ar0s1a tunefs: ACLs: (-a) disabled tunefs: MAC multilabel: (-l) disabled tunefs: soft updates: (-n) enabled tunefs: maximum blocks per file in a cylinder group: (-e) 2048 tunefs: average file size: (-f) 16384 tunefs: average number of files in a directory: (-s) 64 tunefs: minimum percentage of free space: (-m) 8% tunefs: optimization preference: (-o) time tunefs: volume label: (-L) -- Alain Hebert ahebert_at_pubnix.net PubNIX Inc. P.O. Box 175 Beaconsfield, Quebec H9W 5T7 tel 514-990-5911 http://www.pubnix.net fax 514-990-9443 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #1: Sat May 8 10:56:30 EDT 2004 root_at_aal2.pubnix.net:/usr/src/sys/i386/compile/AAL Preloaded elf kernel "/boot/kernel/kernel" at 0xc0945000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09451f4. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2405.46-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 2147418112 (2047 MB) avail memory = 2095943680 (1998 MB) ACPI APIC Table: <IntelR AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard Pentium Pro MTRR support enabled random: <entropy source, Software, Yarrow> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IntelR AWRDACPI> on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> port 0x530-0x537 on acpi0 cpu1: <ACPI CPU> port 0x530-0x537 on acpi0 cpu2: <ACPI CPU> port 0x530-0x537 on acpi0 cpu3: <ACPI CPU> port 0x530-0x537 on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 16 pci1: <display, VGA> at device 0.0 (no driver attached) pci1: <display> at device 0.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.CSAB - AE_NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: <network, ethernet> at device 1.0 (no driver attached) uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbc00-0xbc1f irq 16 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xb000-0xb01f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xb800-0xb81f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfc100000-0xfc1003ff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfc100000 ehci0: [GIANT-LOCKED] ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 ehci_pci_attach: companion usb3 usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: (0x8086) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfb120000-0xfb123fff,0xfb126000-0xfb1267ff irq 20 at device 3.0 on pci3 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfb126000 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:43:2b:be fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:43:2b:be fwe0: Ethernet address: 02:e0:18:43:2b:be fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) atapci0: <Promise PDC20378 SATA150 controller> port 0x8400-0x847f,0x8000-0x800f,0x8c00-0x8c3f mem 0xfb100000-0xfb11ffff,0xfb125000-0xfb125fff irq 23 at device 4.0 on pci3 atapci0: failed: rid 0x20 is memory, requested 4 atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xfb100000 atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xfb125000 ata2: at 0xfb125000 on atapci0 ata3: at 0xfb125000 on atapci0 ata4: at 0xfb125000 on atapci0 ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0x8800-0x88ff mem 0xfb124000-0xfb124fff irq 22 at device 10.0 on pci3 ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8800 ahc0: [GIANT-LOCKED] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs pcib4: <PCI-PCI bridge> at device 11.0 on pci3 pci4: <PCI bus> on pcib4 pcib4: slot 4 INTA is routed to irq 23 pcib4: slot 5 INTA is routed to irq 20 fxp0: <Intel 82550 Pro/100 Ethernet> port 0x7000-0x703f mem 0xfb000000-0xfb01ffff,0xfb041000-0xfb041fff irq 23 at device 4.0 on pci4 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfb041000 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:02:b3:ce:19:3f fxp0: [GIANT-LOCKED] fxp1: <Intel 82550 Pro/100 Ethernet> port 0x7400-0x743f mem 0xfb020000-0xfb03ffff,0xfb040000-0xfb040fff irq 20 at device 5.0 on pci4 fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfb040000 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Ethernet address: 00:02:b3:ce:19:40 fxp1: [GIANT-LOCKED] ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xfb127000-0xfb127fff irq 20 at device 12.0 on pci3 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfb127000 ohci0: [GIANT-LOCKED] usb5: OHCI version 1.0, legacy support usb5: <OPTi 82C861 (FireLink) USB controller> on ohci0 usb5: USB revision 1.0 uhub5: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2 removable, self powered isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: at 0x1f0 irq 14 on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: at 0x170 irq 15 on atapci1 atapci2: <Intel ICH5 SATA150 controller> port 0xd000-0xd00f,0xcc00-0xcc03,0xc800-0xc807,0xc400-0xc403,0xc000-0xc007 irq 18 at device 31.2 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc400 ata5: at 0xc000 on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc800 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xcc00 ata6: at 0xc800 on atapci2 ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x500-0x51f irq 17 at device 31.3 on pci0 ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x500 ichsmb0: [GIANT-LOCKED] smbus0: <System Management Bus> on ichsmb0 smb0: <SMBus generic I/O> on smbus0 pcm0: <Intel ICH5 (82801EB)> port 0xdc00-0xdc3f,0xd800-0xd8ff mem 0xfc102000-0xfc1020ff,0xfc101000-0xfc1011ff irq 17 at device 31.5 on pci0 pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xfc101000 pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xfc102000 pcm0: [GIANT-LOCKED] pcm0: <Analog Devices AD1985 AC97 Codec> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found Probing for PnP devices on ppbus0: plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 orm0: <Option ROMs> at iomem 0xd5000-0xd57ff,0xcc000-0xccfff,0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acd0: DVDR <PIONEER DVD-RW DVR-106D> at ata0-master PIO4 ad4: 152627MB <ST3160023AS> [310101/16/63] at ata2-master SATA150 ad6: 152627MB <ST3160023AS> [310101/16/63] at ata3-master SATA150 ar0: 152587MB <ATA RAID1 array> [19452/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! cd1 at ata0 bus 0 target 0 lun 0 cd1: <PIONEER DVD-RW DVR-106D 1.07> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present cd0 at ahc0 bus 0 target 0 lun 0 cd0: <YAMAHA CRW2100S 1.0G> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 7) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Mounting root from ufs:/dev/ar0s1a WARNING: / was not properly dismounted WARNING: / was not properly dismounted IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabledReceived on Sat May 08 2004 - 07:40:23 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:37:53 UTC