Re: usb dead on sony vaio

On Thursday 11 November 2004 05:13 pm, Toxa wrote:
> In recent current, all usb devices doesn' work in my laptop.  Sorry. but
> I can't say more, it's strange, comparing previous dmesg and a current
> one I can see no differences and/or no fatal errors (see below), but now
> when I plug in my usb bluetooh adapter, usb mouse, usb flash, etc,
> nothing happens. No any kernel messages, nothing.
>
> here is my dmesg (sony vaio pcg-v505bx).
> additionaly, probably due to bluetooth changes in last month
> (my previous kernel was sep, 11) I have a kernel panic when using
> pppd with my cell phone which connected to laptop via bluetooth.
> But how can I post fatal error here, if system hangs with it? :)
>
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights
> reserved. FreeBSD 6.0-CURRENT #0: Wed Nov 10 16:48:46 MSK 2004
>     root_at_***:/usr/obj/usr/src/sys/LAPTOP
> WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
> WARNING: MPSAFE network stack disabled, expect reduced performance.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz (1988.51-MHz 686-class
> CPU) Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>  
> Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
>CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,F XSR,SSE,SSE2,SS,HTT,TM,PBE>
> real memory  = 536346624 (511 MB)
> avail memory = 515547136 (491 MB)
> Pentium 4 TCC support enabled, 6 steps from 100% to 38%, current
> performance 100% acpi0: <SONY> on motherboard
> acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU (2 Cx states)> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at
> device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> drm0: <ATI Radeon LY Mobility M6> port 0x3000-0x30ff mem
> 0xe8100000-0xe810ffff,0xf0000000-0xf7ffffff irq 9 at d evice 0.0 on pci1
> info: [drm] AGP at 0xec000000 64MB
> info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff at device 2.0 on pci2
> wi0: [GIANT-LOCKED]
> wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
> wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.3)
> wi0: Ethernet address: 00:d0:59:49:12:52
> wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
> pcic0: [GIANT-LOCKED]
> pccard0: <PC Card 16-bit bus (classic)> on pcic0
> pci2: <serial bus, FireWire> at device 5.1 (no driver attached)
> ohci0: <NEC uPD 9210 USB controller> mem 0xe8200000-0xe8200fff irq 9 at
> device 7.0 on pci2 ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <NEC uPD 9210 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <NEC uPD 9210 USB controller> mem 0xe8201000-0xe8201fff irq 9 at
> device 7.1 on pci2 ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: <NEC uPD 9210 USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> umass0: Sony USB Memory Stick Slot, rev 1.10/1.90, addr 2
> ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe8203800-0xe82038ff irq
> 9 at device 7.2 on pci2 ehci0: [GIANT-LOCKED]
> ehci_pci_attach: companion usb0
> ehci_pci_attach: companion usb1
> usb2: EHCI version 1.0
> usb2: companion controllers, 3 ports each: usb0 usb1
> usb2: <NEC uPD 720100 USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: single transaction translator
> uhub2: 5 ports with 5 removable, self powered
> fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem
> 0xe8202000-0xe8202fff irq 9 at device 8.0 on pci2
> miibus0: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 08:00:46:ac:4c:a8
> fxp0: [GIANT-LOCKED]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 UDMA100 controller> port
> 0x1800-0x180f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH3 (82801CA)> port 0x1840-0x187f,0x1c00-0x1cff irq 9 at
> device 31.5 on pci0 pcm0: [GIANT-LOCKED]
> pcm0: <Yamaha YMF753 AC97 Codec>
> pci0: <simple comms> at device 31.6 (no driver attached)
> speaker0: <PC speaker> port 0x61 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model GlidePoint, device ID 0
> acpi_cmbat0: <Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> orm0: <ISA Option ROMs> at iomem
> 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0 pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0 Timecounter "TSC" frequency 1988513964 Hz quality 800
> Timecounters tick every 1.000 msec
> IPsec: Initialized Security Association Processing.
> ipfw2 initialized, divert loadable, rule-based forwarding disabled,
> default to deny, logging disabled acpi_cpu: throttling enabled, 8 steps
> (100% to 12.5%), currently 100.0% ad0: 38154MB <HITACHI
> DK23EA-40/00K3A0A3> [77520/16/63] at ata0-master UDMA100 umass0: at
> uhub1 port 2 (addr 2) disconnected
> umass0: detached
> ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
> ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
> ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
> acd0: CDRW <UJDA745 DVD/CDRW/1.00> at ata1-master UDMA33
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <MATSHITA UJDA745 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> Mounting root from ufs:/dev/ad0s3a
I'm also seeing this same behavior on the Fujitsu P2110.
-- 
Anish Mistry