Re: Detection of HTT

Frode Nordahl wrote:
> Hello,
> 
> I have a Intel SE7505VB2 board with two 3.06GHz Xeons
> 
> I have disabled HTT in BIOS, but FreeBSD says this during boot anyway:
> 
>   Hyperthreading: 2 logical CPUs
> 
> Is this harmless, or does this mean the scheduler is running with HTT  
> awareness?

It's harmless and means that the system _detected_ two logical cores.
It doesn't mean that the system used them, and if you look a bit
further down you'll see that it mentions cpu0 and cpu1, and no more.

Scott

> 
> 
> Mvh,
> Frode Nordahl
> 
> dmesg:
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights  reserved.
> FreeBSD 6.0-CURRENT #1: Sun Nov 14 08:37:55 CET 2004
>     frode_at_xxx.yyy.zzz.no:/usr/obj/usr/src/sys/GENERIC
> WARNING: WITNESS option enabled, expect reduced performance.
> ACPI APIC Table: <PTLTD          APIC  >
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3056.50-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
>    
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
> ,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Hyperthreading: 2 logical CPUs
> real memory  = 4025942016 (3839 MB)
> avail memory = 3942326272 (3759 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  6
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <PTLTD   RSDT> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at  
> device 0.0 on pci0
> pci0: <unknown> at device 0.1 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> mem 0xf8000000-0xfbffffff at device 1.0 on  
> pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pci2: <base peripheral, interrupt controller> at device 28.0 (no driver  
> attached)
> pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
> pci3: <ACPI PCI bus> on pcib3
> pci2: <base peripheral, interrupt controller> at device 30.0 (no driver  
> attached)
> pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
> pci4: <ACPI PCI bus> on pcib4
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port  
> 0x7000-0x703f mem 0xf0200000-0xf021ffff irq 52 at device 2.0 on pci4
> em0: Ethernet address: 00:04:23:ab:d9:bf
> em0:  Speed:N/A  Duplex:N/A
> pci0: <unknown> at device 2.1 (no driver attached)
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x6800-0x681f  
> irq 16 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x6820-0x683f  
> irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x6840-0x685f  
> irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> pci5: <display, VGA> at device 2.0 (no driver attached)
> fxp0: <Intel 82550 Pro/100 Ethernet> port 0x8400-0x843f mem  
> 0xf0300000-0xf031ffff,0xf0321000-0xf0321fff irq 18 at device 3.0 on  pci5
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: Ethernet address: 00:04:23:ab:d5:90
> atapci0: <SiI 3112 SATA150 controller> port  
> 0x8440-0x844f,0x8450-0x8453,0x8458-0x845f,0x8454-0x8457,0x8460-0x8467  
> mem 0xf0322000-0xf03221ff irq 19 at device 4.0 on pci5
> ata2: channel #0 on atapci0
> ata3: channel #1 on atapci0
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci1: <Intel ICH4 UDMA100 controller> port  
> 0x6860-0x686f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on  pci0
> ata0: channel #0 on atapci1
> ata1: channel #1 on atapci1
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f0-0x3f3 irq  
> 6 drq 2 on acpi0
> fdc0: [FAST]
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on  
> acpi0
> sio0: type 16550A, console
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7  
> drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> orm0: <ISA Option ROMs> at iomem  
> 0xe2000-0xe27ff,0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x100>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  isa0
> Timecounters tick every 1.000 msec
> witness_get: witness exhausted
> ad0: 29325MB <Maxtor 6E030L0/NAR61EA0> [59582/16/63] at ata0-master  
> UDMA100
> ad4: 78167MB <Maxtor 6Y080M0/YAR51HW0> [158816/16/63] at ata2-master  
> SATA150
> ad6: 78167MB <Maxtor 6Y080M0/YAR51HW0> [158816/16/63] at ata3-master  
> SATA150
> SMP: AP CPU #1 Launched!
> Mounting root from ufs:/dev/ad4s1a
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"