Hello, Ok I tried with ichsmb and it looks like it work dmesg show ichsmb0: <SMBus controller> port 0x400-0x41f at device 31.3 on pci0 ichsmb0: [GIANT-LOCKED] But the is still problem with /dev/smb I also make buildworld but device is still missing. I have to change path of smb.h because in source of consolehm was wrong. No I have compiled correctly but when I start is error msg "Failed to open /dev/smb0" Is there anything I have to do to make this work. And one other thing. Why I get this in dmesg acpi_bus_number: can't get _ADR regards Uros Friday, October 15, 2004, 12:27:22 PM, you wrote: ES> Am Freitag, 15. Oktober 2004 11:28 schrieb Uros: >> Hello , >> >> I have trouble setting chm program to use smbus. >> >> my dmesg say >> >> pci0: <serial bus, SMBus> at device 31.3 (no driver attached) >> >> and pciconf -lv >> >> none2_at_pci0:31:3: class=0x0c0500 card=0x80a61043 chip=0x266a8086 >> rev=0x03 hdr=0x00 vendor = 'Intel Corporation' >> device = '82801FB/FR/FW/FRW SMBus Controller' >> class = serial bus >> subclass = SMBus >> >> In my kernel I add >> >> device smbus >> device iicbus >> device iicbb >> device intpm >> device smb ES> intpm is for BX chipsets. You want to try ichsmb ES> iicbus and iicbb are not needed (for ichsmb) ES> -Harry >> >> but smb is not working. I don't know if this controler is supposed to work >> in 5.3 or I have to wait next releases. >> >> Some days ago I report that ICH6 sata was not recognized correctly but with >> beta7 it works Ok, Here is report from dmesg >> >> ad4: 156334MB <Maxtor 6Y160M0/YAR51HW0> [317632/16/63] at ata2-master >> SATA150 ad6: 156334MB <Maxtor 6Y160M0/YAR51HW0> [317632/16/63] at >> ata3-master SATA150Received on Fri Oct 15 2004 - 16:13:54 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:17 UTC