Re: SMBus with intel

Am Freitag, 15. Oktober 2004 11:28 schrieb Uros:
> Hello ,
>
> I have trouble setting chm program to use smbus.
>
> my dmesg say
>
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>
> and pciconf -lv
>
> none2_at_pci0:31:3:        class=0x0c0500 card=0x80a61043 chip=0x266a8086
> rev=0x03 hdr=0x00 vendor   = 'Intel Corporation'
>     device   = '82801FB/FR/FW/FRW SMBus Controller'
>     class    = serial bus
>     subclass = SMBus
>
> In my kernel I add
>
> device          smbus
> device          iicbus
> device          iicbb
> device          intpm
> device          smb

intpm is for BX chipsets. You want to try ichsmb

iicbus and iicbb are not needed (for ichsmb)

-Harry

>
> but smb is not working. I don't know if this controler is supposed to work
> in 5.3 or I have to wait next releases.
>
> Some days ago I report that ICH6 sata was not recognized correctly but with
> beta7 it works Ok, Here is report from dmesg
>
> ad4: 156334MB <Maxtor 6Y160M0/YAR51HW0> [317632/16/63] at ata2-master
> SATA150 ad6: 156334MB <Maxtor 6Y160M0/YAR51HW0> [317632/16/63] at
> ata3-master SATA150