fxp does not work after upgrade to latest current

From: Vladimir Grebenschikov <vova_at_fbsd.ru>
Date: Sun, 24 Oct 2004 00:42:11 +0400
After upgrade to latest current fxp driver didn't work:

fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: device timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff

any clues ?

With about week-old kernel all is ok.

-- 
Vladimir B. Grebenchikov
vova_at_fbsd.ru

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #2: Sun Oct 24 00:00:25 MSD 2004
    root_at_vbook.fbsd.ru:/usr/obj/usr/src/sys/VBOOK
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1700MHz (1686.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 536281088 (511 MB)
avail memory = 515031040 (491 MB)
netsmb_dev: loaded
acpi0: <SONY> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.14, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
umass0: Sony USB Memory Stick Slot, rev 2.00/1.10, addr 2
umass0: Get Max Lun not supported (STALLED)
ubt0: ALPS UGX, rev 1.10/7.81, addr 3
ubt0: ALPS UGX, rev 1.10/7.81, addr 3
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0000000-0xd00003ff at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
umass1: Sony USB Memory Stick Slot, rev 2.00/1.10, addr 2
ehci_idone: need toggle update status=80018d40 nstatus=80008c80
ehci_idone: need toggle update status=80028d40 nstatus=80008c80
umass1: Get Max Lun not supported (STALLED)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
ACPI link \\_SB_.PCI0.LPCB.LNKF has invalid initial irq 3, ignoring
pci2: <ACPI PCI bus> on pcib2
cbb0: <RF5C475 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2
cardbus0: <CardBus bus> on cbb0
fwohci0: <Ricoh R5C551> mem 0xd0202000-0xd02027ff at device 5.1 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 08:00:46:03:01:8d:e0:3c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1f3dc000
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <network, ethernet> at device 8.0 (no driver attached)
pci2: <network> at device 11.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x18c0-0x18ff,0x1c00-0x1cff mem 0xd0000800-0xd00008ff,0xd0000c00-0xd0000dff irq 9 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Yamaha YMF753 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1686968616 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging unlimited
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 57231MB <TOSHIBA MK6021GAS/GA024A> [116280/16/63] at ata0-master UDMA100
ums0: at uhub1 port 1 (addr 2) disconnected
ums0: detached
umass0: at uhub2 port 1 (addr 2) disconnected
umass0: detached
ubt0: at uhub2 port 2 (addr 3) disconnected
ubt0: detached
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.14, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ubt0: ALPS UGX, rev 1.10/7.81, addr 2
ubt0: ALPS UGX, rev 1.10/7.81, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=49; nframes=6, buffer size=294
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
acd0: CDRW <UJDA755 DVD/CDRW/1.00> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA755 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <Sony MSC-U04 3.00> Removable Direct Access SCSI-0 device 
da0: 1.000MB/s transfers
da0: 3MB (7904 512 byte sectors: 64H 32S/T 3C)
Mounting root from ufs:/dev/ad0s3a
ndis0: <Intel(R) PRO/Wireless 2200BG Network Connection> mem 0xd0201000-0xd0201fff irq 9 at device 11.0 on pci2
ndis0: [GIANT-LOCKED]
ndis0: NDIS API version: 5.1
ndis0: Ethernet address: 00:0e:35:03:82:74
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 5.5Mbps 11Mbps
ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ndis0: couldn't retrieve channel info: 19
ndis0: link up
ndis0: link down
ndis0: couldn't retrieve channel info: 19
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0xfffd
fxp0: EEPROM checksum @ 0xff: 0xffff -> 0xbbb9
fxp0: Ethernet address: ff:ff:ff:ff:ff:ff
fxp0: [GIANT-LOCKED]
ndis0: link up
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: device timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
ndis0: link down
ndis0: couldn't retrieve channel info: 19
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: DMA timeout
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
ndis0: link up
Received on Mon Oct 25 2004 - 06:07:10 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:19 UTC