Re: fxp does not work after upgrade to latest current

From: Vladimir Grebenschikov <vova_at_fbsd.ru>
Date: Mon, 25 Oct 2004 13:08:51 +0400
В пн, 25/10/2004 в 04:22 -0400, Mike Tancsa пишет:
> Can you post to the list a dmesg and pciconf -l -v  ?

# pciconf -l -v
hostb0_at_pci0:0:0:	class=0x060000 card=0x8140104d chip=0x33408086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82855PM Odem Host-Hub Interface Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1_at_pci0:1:0:	class=0x060400 card=0x00000000 chip=0x33418086 rev=0x03
hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82855PM Odem AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0_at_pci0:29:0:	class=0x0c0300 card=0x8140104d chip=0x24c28086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#1'
    class    = serial bus
    subclass = USB
uhci1_at_pci0:29:1:	class=0x0c0300 card=0x8140104d chip=0x24c48086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#2'
    class    = serial bus
    subclass = USB
uhci2_at_pci0:29:2:	class=0x0c0300 card=0x8140104d chip=0x24c78086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
#3'
    class    = serial bus
    subclass = USB
ehci0_at_pci0:29:7:	class=0x0c0320 card=0x8140104d chip=0x24cd8086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB EHCI
Controller'
    class    = serial bus
    subclass = USB
pcib2_at_pci0:30:0:	class=0x060400 card=0x00000000 chip=0x24488086 rev=0x83
hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0_at_pci0:31:0:	class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0_at_pci0:31:1:	class=0x01018a card=0x8140104d chip=0x24ca8086
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
none0_at_pci0:31:3:	class=0x0c0500 card=0x8140104d chip=0x24c38086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller'
    class    = serial bus
    subclass = SMBus
none1_at_pci0:31:5:	class=0x040100 card=0x8140104d chip=0x24c58086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio
Controller'
    class    = multimedia
    subclass = audio
none2_at_pci0:31:6:	class=0x070300 card=0x8140104d chip=0x24c68086 rev=0x03
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem
Controller'
    class    = simple comms
drm0_at_pci1:0:0:	class=0x030000 card=0x8140104d chip=0x4c591002 rev=0x00
hdr=0x00
    vendor   = 'ATI Technologies Inc.'
    device   = 'Mobility 6 Radeon Mobility M6 LY'
    class    = display
    subclass = VGA
none3_at_pci2:5:0:	class=0x060700 card=0x8140104d chip=0x04751180 rev=0xb8
hdr=0x02
    vendor   = 'Ricoh Co Ltd'
    device   = 'RL5c475 CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
none4_at_pci2:5:1:	class=0x0c0010 card=0x8140104d chip=0x05511180 rev=0x00
hdr=0x00
    vendor   = 'Ricoh Co Ltd'
    class    = serial bus
    subclass = FireWire
fxp0_at_pci2:8:0:	class=0x020000 card=0x8140104d chip=0x103d8086 rev=0x83
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) PRO/100 VE Network Connection'
    class    = network
    subclass = ethernet
none5_at_pci2:11:0:	class=0x028000 card=0x27518086 chip=0x42208086 rev=0x05
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'PRO/Wireless 2200BG Network Connection'
    class    = network
#

full dmesg when usual boot (timeouts on fxp) was attached to my first
post, fxp info from it:

fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x4000-0x403f mem
0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0xfffd
fxp0: EEPROM checksum _at_ 0xff: 0xffff -> 0xbbb9
fxp0: Ethernet address: ff:ff:ff:ff:ff:ff
fxp0: [GIANT-LOCKED]
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
...

full dmesg on boot with workaround (initialize fxp in single mode,
minimal drivers before it) attached here, fxp data from it:

fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x4000-0x403f mem
0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address: 08:00:46:c8:45:b3
fxp0: [GIANT-LOCKED]
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

>          ---Mike
> 
> 
> At 04:42 PM 23/10/2004, Vladimir Grebenschikov wrote:
> 
> >After upgrade to latest current fxp driver didn't work:
> >
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: DMA timeout
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: DMA timeout
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: DMA timeout
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: device timeout
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: DMA timeout
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: DMA timeout
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: DMA timeout
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >fxp0: SCB timeout: 0xff 0xff 0xff 0xffff
> >
> >any clues ?
> >
> >With about week-old kernel all is ok.

-- 
Vladimir B. Grebenchikov
vova_at_fbsd.ru

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #2: Sun Oct 24 00:00:25 MSD 2004
    root_at_vbook.fbsd.ru:/usr/obj/usr/src/sys/VBOOK
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1700MHz (1686.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 536281088 (511 MB)
avail memory = 519237632 (495 MB)
acpi0: <SONY> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
ACPI link \\_SB_.PCI0.LPCB.LNKF has invalid initial irq 3, ignoring
pci2: <ACPI PCI bus> on pcib2
pci2: <bridge, PCI-CardBus> at device 5.0 (no driver attached)
pci2: <serial bus, FireWire> at device 5.1 (no driver attached)
pci2: <network, ethernet> at device 8.0 (no driver attached)
pci2: <network> at device 11.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1686969701 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging unlimited
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 57231MB <TOSHIBA MK6021GAS/GA024A> [116280/16/63] at ata0-master UDMA100
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
acd0: CDRW <UJDA755 DVD/CDRW/1.00> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA UJDA755 DVD/CDRW 1.00> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xd0200000-0xd0200fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address: 08:00:46:c8:45:b3
fxp0: [GIANT-LOCKED]
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Received on Mon Oct 25 2004 - 07:09:05 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:19 UTC