Søren Schmidt wrote: >>> >>> please can you post how do you solved the problem? >> >> >> atacontrol mode <channel> DMA4 DMA4 >> atacontrol mode <channel2> DMA4 DMA4 >> >> The reason is that the motherboard only supports ATA100 on two out of >> four IDE channels and hence you need to force the two other channels >> to run at DMA66 > > > How do you come to that conclusion ? There is no such limitation AFAIK. > > However you can only get a total sum of 133MB/s divided by number of > disks (and minus some overhead on older system there is typically > 110MB/s effective bandwidth).. > > The real explanation is much more likely that the timing specs are > marginal (overclocked ?) for the disks, which causes problems.. no, it is my home PC in which I work so it's important stability (not overclocking) and disk redundancy (vinum, gmirror) Also, there is an unresolvable question. Why two 52MB/s disks in raid0 has a throughput of 40MB/s and for raid1 18MB/s??Received on Mon Oct 25 2004 - 16:06:27 UTC
This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:19 UTC