-CURRENT booting locks up during EHCI detection

From: Tai-hwa Liang <avatar_at_mmlab.cse.yzu.edu.tw>
Date: Thu, 28 Oct 2004 22:04:03 +0800 (CST)
Motherboard: MSI 865PE Neo2
-CURRENT cvsup'ed about 3 days ago, SCHED_4BSD, no PREEMPTION.

   Sometime it froze during boot(see following dmesg for the freeze point),
right after ehci0 was deteceted: No panic, hard lock up, manually escape
to debugger doesn't work since the keyboard doesn't respond anymore.

   Following are the verbose booting message while successful booting.
Search for "freeze" to locate the freeze point.

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Mon Oct 25 17:26:21 CST 2004
     root_at_bsd.ethome.com.tw:/usr/src/sys/i386/compile/bsd
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07e6000.
Preloaded splash_image_data "/boot/chuck1.bmp" at 0xc07e626c.
Preloaded elf module "/boot/kernel/if_fxp.ko" at 0xc07e62bc.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc07e6368.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc07e6414.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc07e64c0.
Preloaded elf module "/boot/kernel/ukbd.ko" at 0xc07e656c.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc07e6618.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc07e66c0.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc07e6768.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc07e6814.
Table 'FACP' at 0x1fff0030
Table 'APIC' at 0x1fff00c0
MADT: Found table at 0x1fff00c0
MP Configuration Table version 1.4 found at 0xc00f60d0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table: <AMIINT INTEL865>
Calibrating clock(s) ... i8254 clock: 1193207 Hz
Timecounter "i8254" frequency 1193207 Hz quality 0
Calibrating TSC clock ... TSC clock: 2434149468 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2434.15-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf25  Stepping = 5
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Hyperthreading: 2 logical CPUs
real memory  = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000829000 - 0x000000001f6b3fff, 518565888 bytes (126603 pages)
avail memory = 519737344 (495 MB)
APIC ID: physical 0, logical 0:0
APIC ID: physical 1, logical 0:1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00fdb50
bios32: Entry = 0xfdb60 (c00fdb60)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdb81
pnpbios: Found PnP BIOS data at 0xc00f7540
pnpbios: Entry = f0000:632f  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
      ID: 0x00000000   VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
   lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
acpi0: <AMIINT INTEL865> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=25708086)
pcibios: BIOS version 2.10
Found $PIR table, 14 entries at 0xc00f7b70
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    1    A   0x60  3 4 6 7 10 11 12 14 15
embedded    0    1    B   0x61  3 4 6 7 10 11 12 14 15
embedded    0    2    A   0x60  3 4 6 7 10 11 12 14 15
embedded    0    3    B   0x62  3 4 6 7 10 11 12 14 15
embedded    0   29    A   0x60  3 4 6 7 10 11 12 14 15
embedded    0   29    B   0x63  3 4 6 7 10 11 12 14 15
embedded    0   29    C   0x62  3 4 6 7 10 11 12 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 12 14 15
embedded    0   31    A   0x62  3 4 6 7 10 11 12 14 15
embedded    0   31    B   0x61  3 4 6 7 10 11 12 14 15
slot 1      2    0    A   0x60  3 4 6 7 10 11 12 14 15
slot 1      2    0    B   0x61  3 4 6 7 10 11 12 14 15
slot 1      2    0    C   0x62  3 4 6 7 10 11 12 14 15
slot 1      2    0    D   0x63  3 4 6 7 10 11 12 14 15
slot 2      2    1    A   0x61  3 4 6 7 10 11 12 14 15
slot 2      2    1    B   0x62  3 4 6 7 10 11 12 14 15
slot 2      2    1    C   0x63  3 4 6 7 10 11 12 14 15
slot 2      2    1    D   0x60  3 4 6 7 10 11 12 14 15
slot 3      2    2    A   0x62  3 4 6 7 10 11 12 14 15
slot 3      2    2    B   0x63  3 4 6 7 10 11 12 14 15
slot 3      2    2    C   0x60  3 4 6 7 10 11 12 14 15
slot 3      2    2    D   0x61  3 4 6 7 10 11 12 14 15
slot 4      2    3    A   0x63  3 4 6 7 10 11 12 14 15
slot 4      2    3    B   0x60  3 4 6 7 10 11 12 14 15
slot 4      2    3    C   0x61  3 4 6 7 10 11 12 14 15
slot 4      2    3    D   0x62  3 4 6 7 10 11 12 14 15
slot 5      2    5    A   0x61  3 4 6 7 10 11 12 14 15
slot 5      2    5    B   0x62  3 4 6 7 10 11 12 14 15
slot 5      2    5    C   0x63  3 4 6 7 10 11 12 14 15
slot 5      2    5    D   0x60  3 4 6 7 10 11 12 14 15
slot 6      2    4    A   0x60  3 4 6 7 10 11 12 14 15
slot 6      2    4    B   0x61  3 4 6 7 10 11 12 14 15
slot 6      2    4    C   0x62  3 4 6 7 10 11 12 14 15
slot 6      2    4    D   0x63  3 4 6 7 10 11 12 14 15
embedded    2    9    A   0x68  3 4 6 7 10 11 12 14 15
embedded    2    9    B   0x69  3 4 6 7 10 11 12 14 15
embedded    2    9    C   0x6a  3 4 6 7 10 11 12 14 15
embedded    2    9    D   0x6b  3 4 5 6 7 12 14 15
embedded    2   10    A   0x69  3 4 6 7 10 11 12 14 15
embedded    2    8    A   0x68  3 4 6 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
ACPI timer looks GOOD min = 3, max = 3, width = 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu1: Failed to attach throttling P_CNT
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
 	map[10]: type 3, range 32, base f8000000, size 26, enabled
found->	vendor=0x8086, dev=0x2570, revid=0x02
 	bus=0, slot=0, func=0
 	class=06-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2571, revid=0x02
 	bus=0, slot=1, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x0d (3250 ns), maxlat=0x00 (0 ns)
 	map[20]: type 4, range 32, base 0000e000, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x24d2, revid=0x02
 	bus=0, slot=29, func=0
 	class=0c-03-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=16
 	map[20]: type 4, range 32, base 0000e400, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->	vendor=0x8086, dev=0x24d4, revid=0x02
 	bus=0, slot=29, func=1
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=19
 	map[20]: type 4, range 32, base 0000e800, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x24d7, revid=0x02
 	bus=0, slot=29, func=2
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=c, irq=18
 	map[20]: type 4, range 32, base 0000ec00, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x24de, revid=0x02
 	bus=0, slot=29, func=3
 	class=0c-03-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=16
 	map[10]: type 1, range 32, base febffc00, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found->	vendor=0x8086, dev=0x24dd, revid=0x02
 	bus=0, slot=29, func=7
 	class=0c-03-20, hdrtype=0x00, mfdev=0
 	cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=d, irq=23
 	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x244e, revid=0xc2
 	bus=0, slot=30, func=0
 	class=06-04-00, hdrtype=0x01, mfdev=0
 	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24d0, revid=0x02
 	bus=0, slot=31, func=0
 	class=06-01-00, hdrtype=0x00, mfdev=1
 	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	map[20]: type 4, range 32, base 0000fc00, size  4, enabled
found->	vendor=0x8086, dev=0x24db, revid=0x02
 	bus=0, slot=31, func=1
 	class=01-01-8a, hdrtype=0x00, mfdev=0
 	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=255
 	map[20]: type 4, range 32, base 00000c00, size  5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x24d3, revid=0x02
 	bus=0, slot=31, func=3
 	class=0c-05-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=17
 	map[10]: type 4, range 32, base 0000dc00, size  8, enabled
 	map[14]: type 4, range 32, base 0000d800, size  6, enabled
 	map[18]: type 1, range 32, base febffa00, size  9, enabled
 	map[1c]: type 1, range 32, base febff900, size  8, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x24d5, revid=0x02
 	bus=0, slot=31, func=5
 	class=04-01-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
 	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=b, irq=17
 	powerspec 2  supports D0 D3  current D0
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xfc900000-0xfe9fffff
pcib1:   prefetched decode 0xf3f00000-0xf7efffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
 	map[10]: type 1, range 32, base fd000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xfd000000-0xfdffffff
 	map[14]: type 3, range 32, base f4000000, size 25, enabled
pcib1: device (null) requested decoded memory range 0xf4000000-0xf5ffffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found->	vendor=0x10de, dev=0x002d, revid=0x15
 	bus=1, slot=0, func=0
 	class=03-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
 	intpin=a, irq=16
 	powerspec 1  supports D0 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ukbd0: CHESEN USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe400
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: IBM Corporation product 0x310b, rev 2.00/1.10, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe800
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at device 29.7 on pci0

 		[ ... freeze here sometimes ... ]

ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebffc00
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xc000-0xcfff
pcib2:   memory decode     0xfea00000-0xfeafffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pcib2:   Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
 	map[10]: type 4, range 32, base 0000cc00, size  7, enabled
pcib2: device (null) requested decoded I/O range 0xcc00-0xcc7f
pcib2: matched entry for 2.2.INTA
pcib2: slot 2 INTA hardwired to IRQ 18
found->	vendor=0x1022, dev=0x2020, revid=0x10
 	bus=2, slot=2, func=0
 	class=01-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0087, statreg=0x0200, cachelnsz=0 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x28 (10000 ns)
 	intpin=a, irq=18
 	map[10]: type 4, range 32, base 0000c800, size  6, enabled
pcib2: device (null) requested decoded I/O range 0xc800-0xc83f
pcib2: matched entry for 2.5.INTA
pcib2: slot 5 INTA hardwired to IRQ 17
found->	vendor=0x1191, dev=0x8040, revid=0x01
 	bus=2, slot=5, func=0
 	class=01-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
 	intpin=a, irq=17
 	powerspec 1  supports D0 D3  current D0
 	map[10]: type 1, range 32, base feaef000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xfeaef000-0xfeaeffff
 	map[14]: type 4, range 32, base 0000c400, size  6, enabled
pcib2: device (null) requested decoded I/O range 0xc400-0xc43f
pcib2: matched entry for 2.8.INTA
pcib2: slot 8 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x1050, revid=0x02
 	bus=2, slot=8, func=0
 	class=02-00-00, hdrtype=0x00, mfdev=0
 	cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
 	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
 	intpin=a, irq=20
 	powerspec 2  supports D0 D1 D2 D3  current D0
pci2: <mass storage, SCSI> at device 2.0 (no driver attached)
pci2: <mass storage, SCSI> at device 5.0 (no driver attached)
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xc400-0xc43f mem 0xfeaef000-0xfeaeffff irq 20 at device 8.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaef000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1050 1462 728c 0002
fxp0: Dynamic Standby mode is enabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:0c:76:4c:36:02
fxp0: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3<ATA_SLAVE,ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xd800-0xd83f,0xdc00-0xdcff mem 0xfebff900-0xfebff9ff,0xfebffa00-0xfebffbff irq 17 at device 31.5 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xfebffa00
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xfebff900
pcm0: [GIANT-LOCKED]
pcm0: <C-Media Electronics CMI9739 AC97 Codec (id = 0x434d4961)>
pcm0: Codec features 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features double rate PCM, reserved 1, center DAC, surround DAC, LFE DAC, reserved 4
pcm0: sndbuf_setmap 1f1af000, 4000; 0xd94f3000 -> 1f1af000
pcm0: sndbuf_setmap 1f1a4000, 4000; 0xd94f7000 -> 1f1a4000
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
sio0: irq maps: 0xc821 0xc831 0xc821 0xc821
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0xc821 0xc831 0xc821 0xc821
sio1: <16550A-compatible COM port> port 0x3e8-0x3ef irq 4 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
PC873xx probe at 0x2e got unknown ID 0x0
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xe0000-0xe0fff,0xc0000-0xcffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 2434149468 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ata0-slave: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH5 chip
ata0-master: setting UDMA100 on Intel ICH5 chip
ata0-slave: setting PIO4 on Intel ICH5 chip
ata0-slave: setting UDMA100 on Intel ICH5 chip
ad0: <IBM-DTLA-307030/TX4OA50C> ATA-5 disk at ata0-master
ad0: 29314MB (60036480 sectors), 59560 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/1/63 s:63 l:46492047
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/15/63 s:46492110 l:13544370
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 23803928064 end 23803960319
GEOM: Configure ad0s2, start 23803960320 length 6934717440 end 30738677759
ad1: <HDS722516VLAT80/V34OA6EA> ATA-6 disk at ata0-slave
ad1: 157066MB (321672960 sectors), 319120 C, 16 H, 63 S, 512 B
ad1: 16 secs/int, 1 depth queue, UDMA100
ata1-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata1-master: setting PIO4 on Intel ICH5 chip
ata1-master: setting UDMA66 on Intel ICH5 chip
acd0: <Pioneer DVD-ROM ATAPIModel DVD-106S 0122/E1.22> DVDROM drive at ata1 as master
acd0: read 6894KB/s (6894KB/s), 256KB buffer, UDMA66
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 47996 Hz, will use 48000 Hz
GEOM: Configure ad0s2a, start 0 length 134217728 end 134217727
GEOM: Configure ad0s2b, start 134217728 length 1073741824 end 1207959551
GEOM: Configure ad0s2c, start 0 length 6934717440 end 6934717439
GEOM: Configure ad0s2d, start 1207959552 length 1652555776 end 2860515327
GEOM: Configure ad0s2e, start 2860515328 length 33554432 end 2894069759
GEOM: Configure ad0s2f, start 2894069760 length 4040647680 end 6934717439
GEOM: new disk ad1
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:220941882
[1] f:00 typ:15 s(CHS):1023/0/1 e(CHS):1023/254/63 s:220941945 l:82654425
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s1, start 32256 length 113122243584 end 113122275839
GEOM: Configure ad1s2, start 113122275840 length 42319065600 end 155441341439
MBREXT Slice 5 on ad1s2:
[0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:82654362
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad1s5, start 32256 length 42319033344 end 42319065599
ukbd0: at uhub0 port 1 (addr 2) disconnected
(null): at uhub1 port 1 (addr 2) disconnected
ukbd0: detached
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 6
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <PIONEER DVD-ROM DVD-106 1.22> Removable CD-ROM SCSI-0 device 
pass0: 66.000MB/s transfers
GEOM: new disk cd0
SMP: AP CPU #1 Launched!
cpu1 AP:
      ID: 0x01000000   VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
   lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-106 1.22> Removable CD-ROM SCSI-0 device 
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
ums0: at uhub1 port 2 (addr 3) disconnected
ums0: detached
ukbd0: CHESEN USB Keyboard, rev 1.10/1.10, addr 2, iclass 3/1
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
(null): at uhub0 port 2 (addr 3) disconnected
Linux ELF exec handler installed
procfs registered
linprocfs registered
ums0: IBM Corporation product 0x310b, rev 2.00/1.10, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
Received on Thu Oct 28 2004 - 12:04:05 UTC

This archive was generated by hypermail 2.4.0 : Wed May 19 2021 - 11:38:20 UTC