Re: wifi on 5.3, sort of OT

Do you have miibus in the kernel still?


On Thu, 30 Sep 2004 12:08:55 -0700, Rob <rob_at_pythonemproject.com> wrote:
> I didn't see a wifi mailing list, so thought I would ask here, where the
> real experts hang out  ;)
> 
> I am tired of having to log into windoze in order to access my network
> over wifi.  I think this would be much easier if I wasn't using a notebook.
>  From reading the handbook it appears that the process will take some
> doing, since I need wifi plus cardbus.
> 
> Problem seems to be right now that my Netgear WG511T cardbus card
> doesn't seem to be reconginized.
> 
> wi, cardbus, pcmcia, and the bridge are all compiled into my kernel.
> Possibly a couple other related devices.
> 
> I have attached my dmesg.  Any hints would be appreciated.
> 
> Thanks,  Rob
> 
> 
> 
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.3-BETA5 #0: Sun Sep 19 03:04:23 PDT 2004
>     rob_at_lm741n.dyndns.org:/usr/obj/usr/src/sys/ROBKERN
> WARNING: WITNESS option enabled, expect reduced performance.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) M processor 1700MHz (1698.57-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
>   Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
> real memory  = 1073405952 (1023 MB)
> avail memory = 1040867328 (992 MB)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
> $PIR: BIOS IRQ 11 for 0.29.INTB is not valid for link 0x63
> $PIR: BIOS IRQ 11 for 2.1.INTA is not valid for link 0x63
> pci0: <PCI bus> on pcib0
> agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
> pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <display, VGA> at device 0.0 (no driver attached)
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
> pci2: <PCI bus> on pcib2
> bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at device 0.0 on pci2
> miibus0: <MII bus> on bfe0
> bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
> bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> bfe0: Ethernet address: 00:0d:56:38:b8:a0
> bfe0: [GIANT-LOCKED]
> cbb0: <TI4510 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> fwohci0: <1394 Open Host Controller Interface> mem 0xfaff8000-0xfaffbfff,0xfaffd800-0xfaffdfff irq 11 at device 1.1 on pci2
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 5b:4f:c0:00:3f:ff:ff:ff
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 5a:4f:c0:ff:ff:ff
> fwe0: Ethernet address: 5a:4f:c0:ff:ff:ff
> fwe0: if_start running deferred for Giant
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> pci2: <network> at device 3.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
> pcm0: [GIANT-LOCKED]
> pcm0: <SigmaTel STAC9750/51 AC97 Codec>
> pci0: <simple comms> at device 31.6 (no driver attached)
> cpu0 on motherboard
> orm0: <ISA Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model GlidePoint, device ID 0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/8 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0f13> can't assign resources (irq)
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0401> can't assign resources (port)
> Timecounter "TSC" frequency 1698565329 Hz quality 800
> Timecounters tick every 10.000 msec
> IP Filter: v3.4.35 initialized.  Default = pass all, Logging = enabled
> cardbus0: <network, ethernet> at device 0.0 (no driver attached)
> cbb0: CardBus card activation failed
> ad0: 57231MB <HTS726060M9AT00/MH4OA68A> [116280/16/63] at ata0-master PIO4
> ATAPI_RESET time = 30us
> acd0: CDRW <_NEC DVD+RW ND-5100A/10AC> at ata1-master PIO4
> Mounting root from ufs:/dev/ad0s3a
> cardbus0: Expecting link target, got 0xff
> cardbus0: <old> at device 0.0 (no driver attached)
> cbb0: CardBus card activation failed
> 
> 
> 
> _______________________________________________
> freebsd-current_at_freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe_at_freebsd.org"
> 
> 
>